TITLE

Inkjet printing of light emitting quantum dots

AUTHOR(S)
Haverinen, Hanna M.; Myllylä, Risto A.; Jabbour, Ghassan E.
PUB. DATE
February 2009
SOURCE
Applied Physics Letters;2/16/2009, Vol. 94 Issue 7, pN.PAG
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We demonstrate the fabrication of diodes having inkjet printed light emitting quantum dots layer. Close packing of printed layer is shown to be influenced by surface morphology of the underlying polymer layer and size variance of quantum dots used. We extend our approach to printing quantum dots onto a quarter video graphics array substrate (76 800 monochrome pixels). The purity of emitted electroluminescent spectra of resulting devices is related to coverage integrity of printed layer, which in turn is shown to be affected by the number of printed drops per pixel.
ACCESSION #
36797944

 

Related Articles

  • Midinfrared electroluminescence from pentanary-quaternary heterojunction light-emitting diodes. Cook, N. B.; Krier, A. // Applied Physics Letters;7/13/2009, Vol. 95 Issue 2, p021110 

    InAs-GaInAsSbP-InAsSbP double heterojunction light-emitting diodes were fabricated which exhibit electroluminescence near 3.7 μm at room temperature. Radiative recombination from band-tail states associated with alloy disorder and localized potential fluctuations was observed, as well as...

  • Origin of InGaN/GaN light-emitting diode efficiency improvements using tunnel-junction-cascaded active regions. Piprek, Joachim // Applied Physics Letters;2/3/2014, Vol. 104 Issue 5, p051118-1 

    This Letter investigates the efficiency enhancement achieved by tunnel junction insertion into the InGaN/GaN multi-quantum well (MQW) active region of blue light emitting diodes (LEDs). The peak quantum efficiency of such LED exceeds 100%, but the maximum wall-plug efficiency (WPE) hardly...

  • Optical properties of blue light-emitting diodes in the InGaN/GaN system at high current densities. Bochkareva, N. I.; Gorbunov, R. I.; Klochkov, A. V.; Lelikov, Yu. S.; Martynov, I. A.; Rebane, Yu. T.; Belov, A. S.; Shreter, Yu. G. // Semiconductors;Nov2008, Vol. 42 Issue 11, p1355 

    The current-voltage and brightness-voltage characteristics and the electroluminescence spectra of blue InGaN/GaN-based light-emitting diodes are studied to clarify the cause of the decrease in the emission efficiency at high current densities and high temperatures. It is found that the linear...

  • Intense green-emitting Sr2LiSiO4F:Eu2+ phosphor for n-UV white LEDs. Xinmin Zhang; Jong Su Kim // Applied Physics A: Materials Science & Processing;Nov2009, Vol. 97 Issue 3, p549 

    Eu2+-activated Sr2LiSiO4F phosphors were synthesized at 900°C by solid-state reaction in reducing atmosphere, and their photoluminescence (PL) properties were systematically investigated by diffuse reflection spectra, PL excitation and emission spectra, and by the fluorescence decay curve....

  • White organic light-emitting diodes based on tandem structures. Guo, Fawen; Ma, Dongge // Applied Physics Letters;10/24/2005, Vol. 87 Issue 17, p173510 

    White organic light-emitting diodes made of two electroluminescent (EL) units connected by a charge generation layer were fabricated. Thus, with a tandem structure of indium tin oxide/N,N′-di(naphthalene-1-yl)-N,N′-diphenyl-benzidine (NPB)/9,10-bis-(β-naphthyl)-anthrene...

  • High efficient and low color-temperature white light-emitting diodes with Tb3Al5O12:Ce3+ phosphor. Chen, Yibo; Gong, Menglian; Wang, Gang; Su, Qiang // Applied Physics Letters;8/13/2007, Vol. 91 Issue 7, p071117 

    High efficient Tb3Al5O12:Ce3+ (TAG:Ce3+) phosphors were prepared in a solid-state reaction method with various fluxes. The results show that addition of proper flux can decrease the phase-forming temperature of the TAG crystals and improve the morphology as well as enhance the photoluminescence...

  • Effect of matrix material on the morphology and optical properties of InP-based InAsSb nanostructures. Lei, W.; Tan, H. H.; Jagadish, C. // Applied Physics Letters;10/5/2009, Vol. 95 Issue 14, p143124 

    This paper presents a study on the effect of matrix material on the morphology and optical properties of self-assembled InP-based InAsSb nanostructures. Due to the differences in surface roughness of the growth front, In0.53Ga0.47As matrix layer induces the formation of short quantum dashes...

  • Red light-emitting diodes based on InP/GaP quantum dots. Hatami, F.; Lordi, V.; Harris, J. S.; Kostial, H.; Masselink, W. T. // Journal of Applied Physics;5/1/2005, Vol. 97 Issue 9, p096106 

    The growth, fabrication, and device characterization of InP quantum-dot light-emitting diodes based on GaP are described and discussed. The diode structures are grown on gallium phosphide substrates using gas-source molecular-beam epitaxy and the active region of the diode consists of...

  • Deep UV light emitting diodes grown by gas source molecular beam epitaxy. Nikishin, Sergey; Borisov, Boris; Kuryatkov, Vladimir; Holtz, Mark; Garrett, Gregory A.; Sarney, Wendy L.; Sampath, Anand V.; Hongen Shen; Wraback, Michael; Usikov, Alexander; Dmitriev, Vladimir // Journal of Materials Science: Materials in Electronics;Aug2008, Vol. 19 Issue 8/9, p764 

    We report the structural, electrical, and optical properties of deep UV light emitting diodes (LEDs) grown by gas source molecular beam epitaxy with ammonia on sapphire and AlN/sapphire template substrates. AlN/sapphire substrates were grown by stress controlled hydride vapor phase epitaxy...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics