Difinizio, Tony
October 2000
Assembly;Oct2000, Vol. 43 Issue 10, p40
No abstract available.


Related Articles

  • Test Your Knowledge.  // Welding Journal;Apr2004, Vol. 83 Issue 4, p100 

    Presents a quizzes about welding. Tensile testing; Ductility of metals; Resistance of metals to indentation; Quantification of welding procedures; Properties of steel; Welding electrodes; Weld soundness test; Measurement of weld joint.

  • Remote Laser Beam Welding: A Cost-Effective, High-Productivity. MUELLER, ROBERT; FORREST, MARIANA // Welding Journal;May2011, Vol. 90 Issue 5, p52 

    The article presents information related to laser beam welding. Advantages of the laser beam welding are explained. It is stated that the process of focusing a high-power laser beam onto a metal surface is involved in laser beam welding. It is mentioned that sound welds with mechanical...

  • Joining copper to steel. Barton, Dave // Penton's Welding Magazine;Feb2008, Vol. 81 Issue 2, p32 

    The article presents questions and answers related to welding and metal work including the correct filler metal and shielding gas to be used in joining copper to steel, performing a penetration/soundness test on an aluminum fillet weld, and appearance of magnetic characteristics after welding...

  • Friction Welding Using Insert Metal. Ochi, Hiizu; Ogawa, Koichi; Yamamoto, Yoshiaki; Suga, Yasuo // Welding Journal;Mar2004, Vol. 83 Issue 3, p36 

    Proposes a friction welding technique using an insert metal to produce satisfactory joints of dissimilar metals exhibiting poor weldability. Fiction welding of 2017 aluminum alloy to carbon steel in which formation of a brittle intermetallic compound makes obtaining a sound joint difficult;...

  • Multisensor-based monitoring of weld deposition and plate distortion for various torch angles in pulsed MIG welding. Pal, Kamal; Bhattacharya, Sandip; Pal, Surjya K. // International Journal of Advanced Manufacturing Technology;Sep2010, Vol. 50 Issue 5-8, p543 

    Manufacturing companies often fail to maintain good weld quality due to poor arc stability and distortion after welding. Weld quality can be improved by reducing the transverse shrinkage and the angular distortion in butt welding. The welding deposition efficiency is also an important economic...

  • Prediction of metal deposition from arc sound and weld temperature signatures in pulsed MIG welding. Pal, Kamal; Bhattacharya, Sandip; Pal, Surjya K. // International Journal of Advanced Manufacturing Technology;Dec2009, Vol. 45 Issue 11/12, p1113 

    The weld deposition efficiency is an important economic factor like productivity and weld quality in gas metal arc welding (GMAW). There is a strong relationship between arc sound signals and arc stability (or deposition efficiency) in GMAW. In this work, the variation of weld deposition...

  • Monitoring Gas Metal Arc Welding Process by Using Audible Sound Signal. Horvat, Jožef; Prezelj, Jurij; Polajnar, Ivan; Čudina, Mirko // Strojniski Vestnik / Journal of Mechanical Engineering;Mar2011, Vol. 57 Issue 3, p267 

    The most frequently used arc welding process is gas metal arc welding (GMAW). Different methods are in use for monitoring the quality of a welding process. In this paper sound generated during the GMAW process is used for assessing and monitoring of the welding process and for prediction of...

  • Improvement of Formation Quality for Friction Stir Welded Joints. Fu, R.-D.; Sun, R.-C.; Zhang, F.-C.; Liu, H.-J. // Welding Journal;Jun2012, Vol. 91 Issue 6, p169 

    The weld, ambient temperature, and direction of a friction stir welding (FSW) tool play roles as important as that of the welding parameters in the FSW process. On the assumption that the weld parameters are the same under different directions, the joint welded using a stir tool rotated in a...

  • Research on narrow-gap GMAW with swing arc system in horizontal position. Cui, H.; Jiang, Z.; Tang, X.; Lu, F. // International Journal of Advanced Manufacturing Technology;Sep2014, Vol. 74 Issue 1-4, p297 

    In this paper, a novel swing arc welding system developed for horizontal narrow gap gas metal arc welding (NG-GMAW) which was used in welding and joining heavy plate structures was designed and attempted. Using this welding system, two sound heavy plate beads, i.e., 'multi-layer single-pass'...

  • ALUMINUM Q&A. Anderson, Tony // Welding Journal;Apr2004, Vol. 83 Issue 4, p40 

    Presents answers to queries concerning the welding of aluminum. Gas metal arc welding; Gas welding; Stick electrode welding.


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics