TITLE

THE THERMAL TREATMENT OF ELECTRIC ARC FURNACE DUST UNDER LOW GAS PHASE PRESSURE

AUTHOR(S)
Derda, W.; Mierzwa, K.
PUB. DATE
April 2009
SOURCE
Metalurgija;2009, Vol. 48 Issue 2, p91
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The paper presents the results of laboratory tests on the process of thermal reduction of electric arc furnace dust (EAFD) in the temperature range from 1273 to 1473 K. Before proceeding to the experimental tests, a thermodynamic analysis was made using the computer program FactSage® with the aim of determining the optimal conditions for the dust components reduction reaction to proceed. The results of tests carried out, respectively, under atmospheric pressure conditions and under reduced pressure conditions are presented, where carbon in the form of graphite and blast-furnace dust (containing approx. 40 % of carbon) was used as the reducer. The test results represent the effect of reduced pressure on the potential for intensifying the process of zinc removal from the dust. The degree of zinc extraction was considerably higher compared to the results of tests carried out under atmospheric pressure conditions.
ACCESSION #
36621121

 

Related Articles

  • Oxidation behaviour of SiC-platelets and particulates-reinforced Al2O3/ZrO2 matrix composites. Nour, W. M. N.; Kenawy, S. H. // Journal of Materials Science;Apr2003, Vol. 38 Issue 8, p1673 

    The oxidation behavior of hot-pressed SiC-platelets and particulates-reinforced Al2O3/ZrO2 composites has been studied in an electric furnace at atmospheric pressure at different temperatures. The mass gain as a result of transformation of SiC into SiO2 is described as a function of oxidation...

  • Foaming in Electric Arc Furnace Part I: Laboratory Studies of Enthalpy Changes of Carbonate Additions to Slag Melts. Chychko, Andrei; Seetharaman, Seshadri // Metallurgical & Materials Transactions. Part B;Feb2011, Vol. 42 Issue 1, p20 

    In the present work, a modified thermal analysis technique was used for studying the heat effect of slag foaming with carbonates addition. Experiments were conducted by sinking limestone and dolomite pieces of defined shapes (together with iron sinkers) in molten slag and monitoring the...

  • STUDY CONCERNING THE ANALYSIS OF THE SOLID WASTE GENERATION DYNAMICS SPECIFIC TO THE STEELMAKING IN ROMANIA. Varvara, Dana -- Adriana Iluţiu -- // Metalurgia International;Mar2012, Vol. 17 Issue 3, p70 

    The paper presents an analysis of the solid waste generation dynamics resulted during steelmaking in electric arc furnace in the time frame 2000 -- 2010 in Romania. In this paper there were determined the quantities of solid waste (slag and dust) from steelmaking in the electric arc furnaces...

  • POSSIBILITY OF CARBON STEEL EAFD SOLIDIFICATION/STABILIZATION IN CONCRETE. ISSA, Hatim; KORAĆ, Marija; GAVRILOVSKI, Milorad; KAMBEROVIĆ, Željko // Metalurgia International;2013 Special Issue Nr. 4, Vol. 18, p182 

    Steel scrap recycling is generally performed by direct smelting of scrap in an electric arc furnace, generating about 2% of dust per charge. Electric arc furnace dust (EAFD) is characterized as a hazardous material, due to its heavy metals content and a powder form. A present study indicates the...

  • Foaming in Electric Arc Furnace-Part II: Foaming Visualization and Comparison with Plant Trials. Chychko, Andrei; Teng, Lidong; Seetharaman, Seshadri // Metallurgical & Materials Transactions. Part B;Oct2012, Vol. 43 Issue 5, p1078 

    The kinetics of slag foaming by limestone particles was studied at 1773 K (1500 °C) with the aid of an X-ray imaging system. Two models were implemented to describe the decrease in foam height with the time on the basis of the lowering of the average temperature and CaO shell formation during...

  • Chaotic responses in electric arc furnaces. King, Paul E.; Ochs, Thomas L.; Hartman, Alan D. // Journal of Applied Physics;8/15/1994, Vol. 76 Issue 4, p2059 

    Presents a study which detailed the findings of ongoing research into the nature and extent of electric fluctuations occurring in electric arc furnaces. Indicators of the state of the furnace system; Use of current and voltage wave forms; Analysis of wave forms.

  • THE USE OF ELECTRIC ARC FURNACE DUST FROM STEEL RECYCLING IN CERAMIC GLAZE. Wannakamb, Sirinart; Manuskijsamrun, Sowan; Buggakupta, Wantanee // Qingdao Daxue Shifanxueyuan Xuebao/Journal of Teachers College Q;Oct-Dec2013, Vol. 20 Issue 4, p329 

    Electric arc furnace dust (EAFD) is a waste from steel recycling in an electric arc furnace. Due to the waste mainly consisting of zinc ferrite along with a small amount of heavy metals such as lead and chromium, EAFD is categorized as a toxic waste. Even though proper treatments of EAFD offer...

  • Computational Fluid Dynamics Modeling of Supersonic Coherent Jets for Electric Arc Furnace Steelmaking Process. Alam, Morshed; Naser, Jamal; Brooks, Geoffrey; Fontana, Andrea // Metallurgical & Materials Transactions. Part B;Dec2010, Vol. 41 Issue 6, p1354 

    Supersonic coherent gas jets are now used widely in electric arc furnace steelmaking and many other industrial applications to increase the gas-liquid mixing, reaction rates, and energy efficiency of the process. However, there has been limited research on the basic physics of supersonic...

  • Some features of imaging of the processes occurring in an extended arc discharge in atmospheric-pressure air. German, V.; Glinov, A.; Golovin, A.; Kozlov, P.; Lyubimov, G. // Plasma Physics Reports;Dec2013, Vol. 39 Issue 13, p1142 

    Processes occurring in the low-temperature plasma of extended quasi-stationary arc discharges in air between graphite electrodes are investigated. Along with the conventional (constricted) discharge geometry, other discharge modes-diffuse (distributed) and diffuse-constricted-are studied....

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics