TITLE

EVALUATION OF PLASMA NITRIDING EFFICIENCY OF TITANIUM ALLOYS FOR MEDICAL APPLICATIONS

AUTHOR(S)
Frączek, T.; Olejnik, M.; Tokarz, A.
PUB. DATE
April 2009
SOURCE
Metalurgija;2009, Vol. 48 Issue 2, p83
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The surface layers obtained on selected titanium alloys, used in medicine, by the nitriding under glow discharge condition were investigated. The results concern of: α- titanium alloy Grade 2 and α+β alloys Grade 5 and Grade 5 ELI nitrided in temperature below 873 K. The nitriding experiments were performed in a current glow-discharge furnace JON-600 with assisting of unconventional methods. After nitriding surface layers were characterised by surface microhardness measurements, chemical depth profiles, microhardness depth profiles and wear resistance tests.
ACCESSION #
36621119

 

Related Articles

  • Crutanium: A Partial Denture Alloy Containing Titanium. REISBICK, M. H.; CAPUTO, A. A. // Journal of Dental Research;Sep1973, Vol. 52 Issue 5, p1162 

    The article reports on a test of elasticity for crutanium, an experimental material developed by Krupp Laboratories that might be used in a partial denture prosthesis. Data shows the yield and tensile strengths, elongation, and hardness of crutanium. The conclusion is that test results for...

  • Control of Mechanical Properties of Three-Dimensional Ti-6Al-4V Products Fabricated by Electron Beam Melting with Unidirectional Elongated Pores. Ikeo, Naoko; Ishimoto, Takuya; Serizawa, Ai; Nakano, Takayoshi // Metallurgical & Materials Transactions. Part A;Sep2014, Vol. 45 Issue 10, p4293 

    Aligned, unidirectional, elongated pores were incorporated in Ti-6Al-4V products fabricated by electron beam melting in order to control the mechanical properties of the products such that they became suitable for biomedical applications. Unidirectional pores were successfully produced when the...

  • Study of metal structure welded on the titanium malleable alloy. Vishniakas, I. // Mechanika;2007, Vol. 66 Issue 4, p69 

    The weldability of titanium and its alloys depends on their physical and chemical properties. The most important of them are: high activity of titanium at elevated temperatures, significant tendency of grain growth at heating and the possibility of brittle phases forming during cooling of the...

  • Studies of New-Type Titanium Alloys for Aviation Applications in China. Zhishou ZHU; Xinnan Wang; Guoqiang Shang // Applied Mechanics & Materials;2014, Vol. 687-691, p4362 

    The latest R&D of new-type titanium alloys and their aviation applications as well as the newly developed processing technologies in China have been reviewed in this paper. To meet the requirements of high performance and low cost design of aviation-oriented titanium alloys, great efforts and...

  • Effect of feeding length on deforming behavior of Ti-3Al-2.5 V tubular components prepared by tube gas forming at elevated temperature. Liu, Gang; Wu, Yong; Wang, Dongjun; Yuan, Shijian // International Journal of Advanced Manufacturing Technology;Dec2015, Vol. 81 Issue 9-12, p1809 

    In order to investigate the deforming behavior of the tubular components with a large expansion ratio fabricated by tube gas forming technique, the Ti-3Al-2.5 V tubular components with 50 % expansion ratio were studied under the forming conditions of internal pressure and axial feeding at 800...

  • Spallation in the Alloy Ti-6Al-4V. Church, P. D.; Andrews, T.; Bourne, N. K.; Millett, J. C. F. // AIP Conference Proceedings;2002, Vol. 620 Issue 1, p511 

    The dynamic tensile (spall) strength of the common engineering titanium alloy Ti-6A1-4V has been investigated as a function of impact stress and specimen thickness under conditions of symmetrical impact. Flyer and target plate geometries have been controlled such that release fans from the rear...

  • Yield and Strength Properties of the Ti-6-22-22S Alloy over a Wide Strain Rate and Temperature Range. Kru¨ger, L.; Kanel, G. I.; Razorenov, S. V.; Meyer, L.; Bezrouchko, G. S. // AIP Conference Proceedings;2002, Vol. 620 Issue 1, p1327 

    A mechanical behavior of the Ti-6-22-22S alloy was studied under uniaxial strain conditions at shock-wave loading and under uniaxial compressive stress conditions over a strain rate range of 10[sup -4] S[sup -1] to 10³ S[sup -1]. The test temperature was varied from -175 °C to 620 °C....

  • Dynamic Properties of Nickel-Titanium Alloys. Hackenberg, Robert; Swift, Darnian; Bourne, Neil; Gray III, George; Paisley, Dennis; Thoma, Dan; Cooley, Jason; Hauer, Allan // AIP Conference Proceedings;2004, Vol. 706 Issue 1, p561 

    The shock response of near-equiatomic Ni-Ti alloys have been investigated to support studies of shock-induced martensitic transitions. The equation of state (EOS) and elasticity were predicted using ab initio quantum mechanics. Polycrystalline NiTi samples were prepared with a range of...

  • Study on hot deformation behavior of a new titanium alloy. Qunhui Zheng; Kelu Wang; Shiqiang Lu // Applied Mechanics & Materials;2014, Issue 644-650, p4872 

    Two-phase titanium alloy sample which initial microstructure is equiaxed have been tested by the Gleeble-3500 thermo-analogue machine with the isothermal and constant strain rate, the constitutive relationship of the titanium alloy was constructed by analyzing true stress-strain curve under...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics