TITLE

THE MECHANISM OF LIQUID COPPER DEOXIDATION DURING ARGON BLOWING

AUTHOR(S)
Siwiec, G.; Willner, J.
PUB. DATE
April 2009
SOURCE
Metalurgija;2009, Vol. 48 Issue 2, p75
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Using the method of argon (with specified oxygen content) blowing, the possibility of copper deoxidation has been considered on the basis of specific thermodynamic data. Despite the oxygen exceeding its equilibrium content in argon, a significant copper deoxidation during blowing has been experimentally observed. The explanation of this phenomenon can be the reaction of oxygen with the crucible material. In the present study, graphite and Al2O3 crucibles were used. The stirring effect of gaseous bubbles promotes passing the substrates to and removing the products from the reaction zone.
ACCESSION #
36621117

 

Related Articles

  • THE RATE OF Fb AND Pb ELIMINATION FROM MOLTEN COPPER BY THE USE OF DIFFERENT FLUX COMPOSITION. Mladenovic, Srba; Ivanic, Ljubica; Marjanovic, Sa�a; Ivanov, Svetlana; Guskovic, Dragoslav // Metalurgia International;Sep2012, Vol. 17 Issue 9, p38 

    The rate of Fe and Pb elimination from molten copper by the use of different flux compositions was measured at 1423K. The different flux compositions and the influence of time reaction between the flux and Fe and Pb impurities in molten copper were selected as experimental parameters. The...

  • Research reveals structure of liquid metal.  // Advanced Materials & Processes;Aug2013, Vol. 171 Issue 8, p12 

    The article focuses on an experiment at the German Electron Synchrotron Facility in Hamburg which examined the structure of liquid metals.

  • Preface. Arnberg, Lars; Bonollo, Franco; Montanari, Roberto // Materials Science Forum;2017, Vol. 884, preceding p3 

    No abstract available.

  • Continuous hydrogen measurement in liquid copper--what can we learn? Brodusch, Ludovic; Sanchez, Juan Carlos // Wire Journal International;Aug2003, Vol. 36 Issue 8, p75 

    Describes the theoretical solubility of hydrogen in liquid copper. Correlation between sensor readings in liquid copper and hydrogen content; Effects of process parameters on hydrogen levels; Principle of the hydrogen sensor.

  • Mathematical Modeling on Erosion Characteristics of Refining Ladle Lining with Application of Purging Plug. Huang, AO; Gu, Huazhi; Zhang, Meijie; Wang, Ning; Wang, Ting; Zou, Yang // Metallurgical & Materials Transactions. Part B;Jun2013, Vol. 44 Issue 3, p744 

    According to parameters of the refining ladle with argon bottom blowing, the mathematical model describing the erosion behavior of ladle lining materials was established, the flow process of molten steel and thermal transmission of ladle lining were coupled, and the erosion of ladle lining in...

  • Mixing Enhancement in Gas-Stirred Melts by Rotating Magnetic Fields. Vogt, Tobias; Andruszkiewicz, Artur; Eckert, Sven; Eckert, Kerstin; Odenbach, Stefan; Gerbeth, Gunter // Metallurgical & Materials Transactions. Part B;Dec2012, Vol. 43 Issue 6, p1454 

    A model experiment of a submerged gas injection system in a cylindrical vessel under the influence of a rotating magnetic field and its effect on liquid metal mixing is presented. Argon gas is injected through a nozzle into a column of the eutectic alloy GaInSn, which is liquid at room...

  • Study of elastic mechanical and physicochemical properties of refractory objects with the aim of predicting the endurance of a nonferrous metallurgy unit lining. Slovikovskii, V. // Refractories & Industrial Ceramics;Jan2012, Vol. 52 Issue 5, p358 

    The construction of contemporary laboratory units, procedures for studying the elastic mechanical and physicochemical properties of different composition, both original, and impregnated with molten slag-matte of copper composition are developed with the aim of determining nonferrous metallurgy...

  • Ion energy distribution near a plasma meniscus for multielement focused ion beams. Mathew, Jose V.; Bhattacharjee, Sudeep // Journal of Applied Physics;May2009, Vol. 105 Issue 9, p096101 

    The axial ion energy spread near a plasma meniscus for multielement focused ion beams is investigated experimentally in atomic and molecular gaseous plasmas of krypton, argon, and hydrogen by tailoring the magnetic field in the region. In the case of magnetic end plugging, the ion energy spread...

  • Removal of Boron from Silicon-Tin Solvent by Slag Treatment. Ma, Xiaodong; Yoshikawa, Takeshi; Morita, Kazuki // Metallurgical & Materials Transactions. Part B;Jun2013, Vol. 44 Issue 3, p528 

    To eliminate B effectively from Si for its use in a solar cell, a novel process involving the slag refining of molten Si with Sn addition was investigated. The partition ratio of B between CaO-SiO-24 mol pct CaF slag and Si-Sn alloy at 1673 K (1400 °C) was determined by the chemical...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics