TITLE

Acceleration insensitive encapsulated silicon microresonator

AUTHOR(S)
Jha, C. M.; Salvia, J.; Chandorkar, S. A.; Melamud, R.; Kuhl, E.; Kenny, T. W.
PUB. DATE
December 2008
SOURCE
Applied Physics Letters;12/8/2008, Vol. 93 Issue 23, p234103
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper presents the acceleration sensitivity and the resulting vibration-induced phase noise of an electrostatically coupled encapsulated silicon microresonator. External vibrations can produce phase noise in microresonators by generating time-varying stress in the resonant beams. A spring mounted resonator design that reduces the induced axial stress is presented here. Measurements and simulations show that the acceleration sensitivity and the vibration-induced phase noise of this device can be reduced 1000 times smaller than that of the previously published silicon microresonator and 10 times smaller than the commercially used high end SC (stress compensated)-cut quartz resonator.
ACCESSION #
35886532

 

Related Articles

  • Investigating a power tiller handle and seat vibration on transportation mode. Ahmadian, Hossein; Hassan-Beygi, Seyed Reza; Ghobadian, Barat // Agricultural Engineering International: CIGR Journal;Dec2014, Vol. 16 Issue 4, p194 

    In this paper, a power tiller vibration was investigated at handle position as well as seat position of a trailer pulled by the power tiller. The experiments were conducted at five levels of engine speed, four levels of transmission gear ratio during transportation, and in three directions. Then...

  • Acceleration response spectrum for predicting floor vibration due to occupant walking.  // Noise & Vibration Worldwide;Oct2015, Vol. 46 Issue 9, p25 

    An abstract of the article "Acceleration response spectrum for predicting floor vibration due to occupant walking," by J. Chen and colleagues is presented.

  • Vibration sensor overview.  // Process & Control Engineering (PACE);Aug2004, Vol. 57 Issue 7, p42 

    Focuses on ways to measure and display vibration sensors. Use of an accelerometer to convert acceleration to an electrical signal; Measurement of velocity sensors; Usability of the displacement sensors.

  • CALCULATION OF SIZE OF STRUCTURAL CONSTITUENTS OF METAL DEPOSITED BY INDUCTION METHOD WITH APPLICATION OF MECHANICAL VIBRATION. SENCHISHIN, V. S.; PULKA, Ch. V. // Paton Welding Journal;Aug2015, Issue 8, p31 

    Possibility of regulation of structure of deposited metal allows improving service properties of the parts. Present work studies the processes of refining of structure of deposited metal at application of horizontal mechanical vibration. Calculation model for determination of parameters of metal...

  • VIBRATION EXPOSURE ON FORK-LIFT TRUCKS. Malchaire, J.; Piette, A.; Mullier, I. // Annals of Occupational Hygiene;1996, Vol. 40 Issue 1, p79 

    This study investigates the effects of the main characteristics of the working condition on the vibration exposure on fork-lift trucks. Four hundred and eighty recordings were made on five trucks equipped with four different types of tyres and a ‘normal’ or an...

  • Temporary Threshould Shift of the Vibration Perception Threshold following a Short Duration Exposure to Vibration. MALCHAIRE, J.; PIETTE, A.; DIAZ, L. S. RODRIGUEZ // Annals of Occupational Hygiene;1998, Vol. 42 Issue 2, p121 

    The objective of this study is to analyze the evolution of the vibration perception threshold (VPT) following a short duration exposure to vibration. The literature reports experiments with 3 to lOtnin exposure to vibration after which a steady state is not necessarily reached. The temporary...

  • Structural Vibration Analysis under Fuzzy Excitations due to Passing Heavy Vehicles. Wang, B. S.; Yang, Y. W. // Advances in Structural Engineering;Aug2013, Vol. 16 Issue 8, p1469 

    This paper presents a new method to predict the dynamic response of buildings due to passing heavy vehicles in the context of multi-source fuzzy dynamic finite element analysis. The uncertain parameters considered as fuzzy variables include structural mass, stiffness, damping matrix and...

  • Research on velocity and acceleration geophones and their acquired information. Liu, Zhen-Dong; Lu, Qing-Tian; Dong, Shi-Xue; Chen, Ming-Chun // Applied Geophysics: Bulletin of Chinese Geophysical Society;Jun2012, Vol. 9 Issue 2, p149 

    Based on the research of two geophone types (10 Hz moving-coil velocity and piezoelectric acceleration) and their velocity and acceleration parameters, frequency response functions have been determined, as well as the differences between them. Also, shock-vibration tests have been accomplished,...

  • Dynamic performance of the Confederation Bridge due to traffic and wind. Naumoski, Nove; Cheung, Moe S.; Foo, Simon // Canadian Journal of Civil Engineering;Jun2004, Vol. 31 Issue 3, p487 

    This paper describes results from a study of the dynamic performance of the Confederation Bridge during traffic load tests and a storm with high winds that occurred at the bridge site on 7 November 2001. The traffic load tests were conducted over a three-span segment of the bridge and consisted...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics