TITLE

Laser assisted Cold Spray

AUTHOR(S)
Cockburn, Andrew; Bray, Matthew; O'Neill, William
PUB. DATE
November 2008
SOURCE
Industrial Laser Solutions;Nov2008, Vol. 23 Issue 11, p15
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
The article discusses the applications of cold spray (CS) in laser based technologies. It mentions that CS deposits coatings without melting the powder particles, thus reducing the problems caused by laser alloying and cladding. CS also produces coatings and 3D objects, and can deposit pure metals and composite coatings. Due to its cold deposition mechanism, the author states that CS offers low oxide content, low thermally induced stresses, and the ability to coat a variety of substances.
ACCESSION #
35443348

 

Related Articles

  • Parameter Optimization for Mould and Die Recovering Using Laser Cladding. Tabernero, I.; Lamikiz, A.; Ukar, E.; Arregi, B.; Figueras, J.; Soriano, C. // AIP Conference Proceedings;11/23/2009, Vol. 1181 Issue 1, p484 

    In the last years the laser cladding has become an important technology that has been studied by several industries as automotive or aeronautical. Therefore, although this technology was used initially for coatings, actually it is being used for repairing or even direct manufacturing of high...

  • Laser cladding extends life of extrusion screws by 300%.  // Industrial Laser Solutions;Jan/Feb2017, Vol. 32 Issue 1, p2 

    The article focuses on the LCV CorroSlide coating method developed by Laser Cladding Ventures (LCV) which significantly extends the operation time of bulk extrusion screws used in pet food manufacturing. Topics discussed include the undissolved state of carbide coatings utilized in the process...

  • Surface enhancement with laser cladding. Canter, Neil // Tribology & Lubrication Technology;Mar2008, Vol. 64 Issue 3, p10 

    The article provides information on laser cladding, a process that deposits a metal surface onto a substrate with a laser. Metal powder of the desired alloy is integrated into a laser beam, which melts and directs the metal onto the substrate. The main benefit of the process is that a surface...

  • Metallization to asymmetric cladding separate confinement heterostructure lasers. Smith, G.M.; Forbes, D.V. // Applied Physics Letters;12/25/1995, Vol. 67 Issue 26, p3847 

    Examines the use of p-contact metallization for asymmetric cladding separate confinement heterostructure lasers. Use of titanium-gold and annealed titanium-platinum-gold contacts to improve adhesion; Reason for increase optical loss; Ideal amount of titanium for an adhesion layer.

  • Electrocoating Technology.  // Products Finishing;May2003, Vol. 67 Issue 8, p78 

    Metal Cladding Inc. is a company that provides electrocoating technology for enhanced corrosion protection required in the appliance, automotive, electrical fastener, HVAC and other industries.

  • ELECTROCOATNG. TIRADO, JOSE A. // Products Finishing;Jun2014, Vol. 78 Issue 9, p40 

    The article provides questions and answers related to electrocoating including how to avoid voids in the electrocoat around the welds, the bend test failure of electrocoating and how to increase coating thickness in CRS (Cladding Refurbishment System) and galvanized steel.

  • Repair of Erosion Defects in Gun Barrels by Direct Laser Deposition. Nowotny, Steffen; Spatzier, Joerg; Kubisch, Frank; Scharek, Siegfried; Ortner, Jens; Beyer, Eckhard // Journal of Thermal Spray Technology;Dec2012, Vol. 21 Issue 6, p1173 

    In recent years the development of functional carbide coatings follows the trend to use composite powders with fine grained hard particles. In addition to thermal spraying, laser cladding is a suitable surface technology in particular for dynamically loaded components, and it is widely used for...

  • LASER CLADDING OF METCO 12C POWDER. STAICU, Adrian Răzvan // Metalurgia;aug2012, Vol. 64 Issue 7, p25 

    This paper presents a research regarding the optimal parameter for the laser cladding process. The laser power range for Ni based powder coaxial cladding is investigated. The power density influence over the relevant geometry features and coating microstructure is analysed in seven laser cladded...

  • Investigation of Wear Behavior of Laser Cladded Low Carbon Steel Using Inconel 625 Nanopowder. Ramulu, M.; Beck, Matthew M.; Hughes, Christopher T. // Journal of Materials Science & Engineering;2011, Vol. 5 Issue 3, p323 

    Inconel 625 nanopowder was plasma sprayed onto a carbon steel substrate, and then laser remelted with various laser parameters. The base coating was laser treated for both partial surface melting and full coating remelt. Surface modification of carbon steel with inconel was also conducted via...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics