Potential solution to processing clear adhesives

Cassell, Roger A.; Kistner, David
October 2008
Rubber & Plastics News;10/6/2008, Vol. 38 Issue 5, p25
Trade Publication
The article presents information on rubber to metal/thermoplastic adhesion technology, that comprises dissolved thermoset rubbers and elastomers, organo-functional silanes and siloxanes, and other rubber additives imparting adhesion between dissimilar materials. It is stated that rubber to metal or thermoplastic plastic bonding systems based on organo-functionalized silanes or siloxanes have several applications, ranging from automotive and aerospace seals to medical products.


Related Articles

  • Silane-rubber coupling in sulfur, peroxide and metal oxide curing systems. Taikum, Orawan; Luginsland, Hans-Detlef // Rubber World;Aug2004, Vol. 230 Issue 5, p30 

    Describes the silica-rubber coupling effect on the degree of reinforcement using various chemical silanes in different types of elastomers and curing systems. Effectiveness of each silane in providing silica-rubber coupling; Processing and curing properties of rubber compounds; Use of...

  • TPEs gaining ground steadily. Shaw, David // European Rubber Journal;Nov2002, Vol. 184 Issue 11, p22 

    Focuses on the acceptance gained by thermoplastic elastomers among rubber processing companies. Advantages of thermoplastic elastomers; Market for thermoplastic vulcanisates; Advice on designing hinge points in Santoprene, in order to get the best recovery after deformation.

  • Co-moulding with LSR. Haberstroh, Edmund; Lettowsky, Christoph // European Rubber Journal;Feb2002, Vol. 184 Issue 2, p16 

    Discusses the advantage of the combination of liquid silicone rubbers (LSR) and thermoplastics for two-compenent moulding processes. Progress of moulders with multi-component injection moulding systems; Difference between LSR and thermoplastic elastomer; Properties of LSR.

  • Elast-O-Flux silanes boost processability, control. Tisler, Andrew // Rubber & Plastics News;9/3/2001, Vol. 31 Issue 3, p11 

    Reports the application of silane coupling agents in the rubber industry. Causes of productivity constraints; Emphasis of the costs for liquid handling systems and carbon black carrier; Forms of a thermoplastic-bound silane.

  • Silane coupling agent.  // Rubber World;Dec2005, Vol. 233 Issue 3, p63 

    The article features the Z-6172 silane from Dow Corning Corp. which is designed to provide improved dispersion of mineral fillers in rubbers and thermoplastic resins. It increases strengths of glass-filled polyester and other resin systems. It can also optimize electrical and physical properties...

  • Bisphenol-A Resole Resins in Preparation Aqueous Adhesives for Bonding Silicon Rubber-to-Metal. KHOUDARY, KAMAL; SARKIS, NAZIRA; SALLOUM, GASSAN; GHARIBE, SAMER // Asian Journal of Chemistry;2012, Vol. 24 Issue 8, p3629 

    An aqueous adhesives composition of bisphenol-A resoles resins as adhesion promoter, in combination with a silane compound were prepared useful for bonding silicon rubber to metal surfaces. Silicon rubber-metal joints were prepared and tested according to ASTM D 429 before and after the unloaded...

  • Synthesis, characterization, and polycondensation of new stable α,ω-organo(bis-silanediols). Cerveau, Geneviève; Chappellet, Sabrina; Corriu, Robert J. P.; Dabiens, Bertrand // Canadian Journal of Chemistry;Nov2003, Vol. 81 Issue 11, p1213 

    The synthesis and characterization of stable bis(dihydroxymethylsilyl) derivatives are described. These compounds were obtained as microcrystalline powders by controlled hydrolysis in a biphasic medium (ethyl ether – water) of the corresponding bis(dimethoxymethylsilyl) organic precursors...

  • Condensation of aw siloxane diols with aminoalkyl- (alkoxy)silanes. Lubkowska, Magdalena; Stanczyk, Wlodzimierz A.; Rozga-Wijas, Krystyna // e-Polymers;Aug2013, Vol. 13 Issue 1, p249 

    Kinetics of condensation of individual siloxane diols HO[(CH3)2SiO]xSi(CH3)2OH (x=3,5,6 and 9) with aminoalkyl-alkoxysilanes (RO)2SiR'(CH2)3NHR'' (R = CH3, CH2CH3; R' = CH3, OR; R'' = H, (CH2)2NH2) is described. The second order rate constants point to the significant effect of the siloxane...

  • TPVs show good adhesion during melt processing. Hill, Marvin; Goncy, Mike; Herzlich, Harold // Rubber & Plastics News;5/5/2003, Vol. 32 Issue 20, p14 

    This article focuses on the use of engineered thermoset and thermoplastic elastomers in combination with metal components for many molded and extruded applications. Some thermoset elastomers can bond directly to certain types of metallic surfaces, liquid adhesives, including organic solvent and...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics