Effects of Steel Slag Usage as Aggregate on Indirect Tensile and Creep Modulus of Hot Mix Asphalt

K�k, Baha Vural; Kuloglu, Necati
July 2008
Gazi University Journal of Science;Jul2008, Vol. 21 Issue 3, p97
Academic Journal
No abstract available.


Related Articles

  • Use of steel slag aggregate in asphalt concrete mixes. Asi, Ibrahim M.; Qasrawi, Hisham Y.; Shalabi, Faisal I. // Canadian Journal of Civil Engineering;Aug2007, Vol. 34 Issue 8, p902 

    There are three major steel-manufacturing factories in Jordan. All of their by-product, steel slag, is dumped randomly in open areas, causing many environmentally hazardous problems. This research was intended to study the effectiveness of using steel slag aggregate (SSA) in improving the...

  • Laboratory Investigation of Fatigue Characteristics of Asphalt Mixtures with Steel Slag Aggregates. Ziari, Hassan; Nowbakht, Shams; Rezaei, Sajad; Mahboob, Arash // Advances in Materials Science & Engineering;10/11/2015, Vol. 2015, p1 

    There are many steel-manufacturing factories in Iran. All of their byproducts, steel slag, are dumped randomly in open areas, causing many environmentally hazardous problems. This research is intended to study the effectiveness of using steel slag aggregate (SSA) in improving the engineering...

  • INVESTIGATION OF INDUSTRIAL WASTES IN HOT MIX ASPHALT FOR MOISTURE DAMAGE RESISTANCE. Kanitpong, Kunnawee; Pummarin, Kitsumate // Journal of Solid Waste Technology & Management;May2010, Vol. 36 Issue 2, p81 

    Moisture damage is one of the main problems in asphalt pavement which is found especially in areas with high a amount of rainfall. One effective solution is to apply anti-stripping additives in asphalt mixtures to reduce the stripping of asphalt binder from the aggregate surface due to moisture....

  • Investigating the resistance of asphaltite containing hot mix asphalts against fatigue and permanent deformation by cyclic tests. Yilmaz, Mehmet; Kök, Baha Vural; Kuloğlu, Necati // Canadian Journal of Civil Engineering;Jan2013, Vol. 40 Issue 1, p27 

    In this study, the aim was to determine the influence of asphaltite addition on the stiffness of the hot mix asphalts as well as on their resistance against fatigue and permanent deformation through cyclic tests. The asphaltite was included as filler into the hot mix asphalt specimens at five...

  • Effect of Filler Type and Particle Size on Moisture Susceptibility of Stone Mastic Asphalt Mixtures. Muniandy, Ratnasamy; Aburkaba, Eltaher Elzarroug // Australian Journal of Basic & Applied Sciences;2010, Vol. 4 Issue 11, p5522 

    Moisture damage is one of the common distresses found in asphalt pavements and moisture sensitivity in asphalt concrete mixtures is often associated with high concentrations of fine aggregate particles. Fines in asphalt pavements can have a detrimental impact on asphalt mixtures because of their...

  • Study on the Application of Steel Slag in Porous Asphalt Concrete. Wenhuan Liu; Pinjing Xu; Huimei Zhu; Minglin Xu // International Journal of Simulation -- Systems, Science & Techno;2015, Vol. 16 Issue 5A, p16.1 

    As one of the world largest output of the solid wastes, the effect of disposal of steel slag on the environmental protection is one of the most popular researches in the world. Against the background of the rapid development of China's highway, the application of steel slag in asphalt concrete...

  • Steel Slag as an Aggregate Replacement in Malaysian Hot Mix Asphalt. Hainin, Mohd Rosli; Yusoff, Nur Izzi Md.; Sabri, Mohd Fahmi Mohammad; Aziz, Mohd Azizi Abdul; Hameed, Mohd Anwar Sahul; Reshi, Wasid Farooq // ISRN Civil Engineering;2012, p1 

    As natural aggregate sources are becoming depleted due to high demand in road construction and the amount of disposed waste material keeps increasing, researchers are exploring the use of alternative materials which could preserve natural sources and save the environment. In this study, steel...

  • Laboratory Evaluation of Foamed Warm Mix Asphalt. Ali, Ayman W.; Abbas, Ala R.; Nazzal, Munir; Powers, David // International Journal of Pavement Research & Technology;Mar2012, Vol. 5 Issue 2, p93 

    A laboratory study was designed and executed to evaluate the performance of Warm Mix Asphalt prepared using foamed asphalt binders (WMA-FA) and compare it to traditional Hot Mix Asphalt (HMA). Two aggregates (crushed limestone and natural gravel) and two asphalt binders (neat PG 64-22 and...

  • Use of Unconventional Aggregates in Hot Mix Asphalt Concrete. Haritonovs, Viktors; Brencis, Guntis; Zaumanis, Martins; Smirnovs, Juris // Construction Science;2013, Vol. 14, p44 

    Annually 100 to 200 thousand tons of steel slag aggregates are produced in Latvia. The study investigates the use of dolomite sand waste as a filler or/and sand material plus BOF steel slag as a fine and coarse aggregate for the design of high performance asphalt concrete. Various combinations...

  • Assessing Mechanical Properties of Hot Mix Asphalt with Wire Wool Fibers. Bdour, Ahmed N.; Khalayleh, Yahia; Al-Omari, Aslam A. // Advances in Civil Engineering;5/19/2015, Vol. 2015, p1 

    This paper investigates the potential application of wire wool in the modification of hot asphalt mixes (HMA). Wire wool material is widely available at local markets as a by-product of wire wool industry and as waste products from homes. For the purpose of this study, wire wool was cut into...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics