TITLE

Nanobelts in multicomponent aluminum alloys

AUTHOR(S)
Jia, Z. H.; Arnberg, L.
PUB. DATE
September 2008
SOURCE
Applied Physics Letters;9/1/2008, Vol. 93 Issue 9, p093115
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
High density of nanobeltlike precipitates has been observed in an Al–Si–Mg–Hf–Y alloy after heat treatments. Quantitative analysis in scanning transmission electron micrscopy (TEM) shows that the precipitates contain Hf, Si, and some Al. The precipitates have an orthorhombic structure which has been revealed by high-resolution TEM and electron diffraction. The precipitates have been identified to be of the Si2Hf-type phase.
ACCESSION #
34360648

 

Related Articles

  • About computation of homogenization regimes for aluminum alloys. Teleshov, V. // Metal Science & Heat Treatment;May2007, Vol. 49 Issue 5/6, p320 

    The basic experimentally determined laws of the appearance of dendritic segregation and formation of grain structure in an ingot, the mechanism of homogenizing annealing that promotes dissolution of inclusions of nonequilibrium phases, various approaches to computing homogenization regimes, the...

  • The electrical resistance of nickel and β-brass as a function of isobaric thermal deformation in ordered and disordered phases. Murlieva, Zh.; Palchaev, D.; Borzov, E.; Iskhakov, M.; Akaev, F. // High Temperature;Nov2007, Vol. 45 Issue 6, p797 

    Results are given of experimental investigations of electrical resistance and coefficient of thermal expansion of nickel and β-brass in the temperature range from 300 to 1050 K. It is found that the electrical resistivity of nickel and β-brass is directly proportional to relative thermal...

  • Ab initio study of structural parameters and gap bowing in zinc-blende AlxGa1-xN and AlxIn1-xN alloys. Kanoun, M. B.; Goumri-Said, S.; Merad, A. E.; Mariette, H. // Journal of Applied Physics;9/15/2005, Vol. 98 Issue 6, p063710 

    We present first-principles calculations of the structural and electronic properties of zinc-blende AlxGa1-xN and AlxIn1-xN alloys by application of the all-electron full-potential linearized augmented plane-wave method within density-functional theory and the local-density approximation. When...

  • Investigation on Ge5− xSb xTe5 phase-change materials by first-principles method. Miao, Naihua; Baisheng Sa; Jian Zhou; Lihua Xu; Zhimei Sun; Ahuja, Rajeev // Applied Physics A: Materials Science & Processing;Jun2010, Vol. 99 Issue 4, p961 

    The structure stability and chemical bonding of Ge5− xSb xTe5 ( x=0,1,2) phase-change alloys were studied by ab initio calculations. By analyzing formation energies, density of states and electron localization function, we have shown that the chemical bonding character of Ge4Sb1Te5 is...

  • Thermodynamics and liquid phase separation in the Cu-Co-Nb ternary alloys. Yan Yu; Xingjun Liu; Zhipeng Jiang; Cuiping Wang; Kainuma, Ryosuke; Ishida, Kiyohito // Journal of Materials Research;Sep2010, Vol. 25 Issue 9, p1706 

    This work first deals with the effect of Nb addition on the liquid phase separation in the Cu-Co system, which displays a metastable liquid miscibility gap. The isothermal sections at 800, 900, 1000, 1100, and 1200 °C in the Cu-Co-Nb system have been experimentally determined by optical...

  • Precipitation Kinetics of the Hardening Phase in Two 6061 Aluminium Alloys. Aouabdia, Y.; Hamamda, S.; Boubertakh, A. // International Review of Physics;Oct2007, Vol. 1 Issue 4, p266 

    The purpose of this work is to study the kinetics of the precipitation of the hardening phase in two commercial age-hardenable Al-Mg-Si alloys. A review of the theoretical framework for solid-state reactions kinetics and the determination of kinetic parameters from DSC curves is provided, then...

  • Solidification Observations of Dendritic Cast Al Alloys Reinforced with TiC Particles. Karantzalis, A.; Lekatou, A.; Georgatis, E.; Tsiligiannis, T.; Mavros, Η. // Journal of Materials Engineering & Performance;Dec2010, Vol. 19 Issue 9, p1268 

    TiC particulate composites in the range of 3 to 5 vol.% were prepared by diluting Al/20 vol.% TiC composite in Al7Si, Al20Cu, and Al20CuNi alloy matrices. TiC particle distribution consists of isolated particles located both at the primary α-dendrites and the areas of the lastly solidified...

  • Simulation of Temperature Distribution Inhomogeneity in Aluminum Alloy During Hot Rolling. Bisadi, H.; Rezaei Ashtiani, H. R.; Bagheripoor, M.; Alimardani, M. // International Review on Modelling & Simulations;Oct2010, Vol. 3 Issue 5, p1137 

    In hot rolling, a metal is given its final shape by thermo-plastically deforming the original stock. The formation of the temperature profile therefore has a complex history. In this process, it is essential to know the temperature distribution within the strip along the thickness and length of...

  • Influence of Cr on the nanoclusters formation and superferromagnetic behavior of Fe-Cr-Nb-B glassy alloys. Chiriac, H.; Whitmore, L.; Grigoras, M.; Ababei, G.; Stoian, G.; Lupu, N. // Journal of Applied Physics;2015, Vol. 117 Issue 17, p17B522-1 

    High resolution imaging and electron diffraction confirm that in the as-quenched state the structure of Fe79.7-xCrxNb0.3B20 (x=11-13 at. %) melt-spun ribbons is completely amorphous, independent of the Cr content. Energy-dispersive X-ray spectroscopy mapping emphasizes clearly the presence of Fe...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics