TITLE

Carrier doping in anatase TiO2 film by perovskite overlayer deposition

AUTHOR(S)
Takahashi, K. S.; Hwang, H. Y.
PUB. DATE
August 2008
SOURCE
Applied Physics Letters;8/25/2008, Vol. 93 Issue 8, p082112
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Heterostructures composed of perovskite overlayers on anatase TiO2 films were fabricated on LaAlO3 substrates. By depositing LaTiO3 and LaAlO3 thin films on the insulating anatase TiO2 films, metallic conduction was induced in the anatase layer with the increasing thickness of the perovskite overlayer. This perovskite overlayer deposition on TiO2 provides a method to induce free carriers, which may be applied to the development of transparent conducting oxides.
ACCESSION #
34198751

 

Related Articles

  • Influence of symmetry mismatch on heteroepitaxial growth of perovskite thin films. Proffit, D. L.; Jang, H. W.; Lee, S.; Nelson, C. T.; Pan, X. Q.; Rzchowski, M. S.; Eom, C. B. // Applied Physics Letters;9/15/2008, Vol. 93 Issue 11, p111912 

    Epitaxial thin films of (110) orthorhombic CaRuO3 grown on orthorhombic (110) NdGaO3 and cubic (001) (LaAlO3)0.3–(Sr2AlTaO6)0.7 (LSAT) substrates serve as a model system isolating the influence of oxygen octahedron distortion on epitaxial growth of thin films. CaRuO3 grows as a coherent...

  • Large Remanent Polarization of Pm2O3-doped Bi4Ti3O12 Films. M. Chen; X. A. Mei; C. Q. Huang // Key Engineering Materials;2014, Vol. 591, p104 

    Pm-doped bismuth titanate (Pm4-xLaxTi3O12: BPT) and pure Bi4Ti3O12 (BIT) thin films with random orientation were fabricated on Pt/Ti/SiO2/Si substrates by rf magnetron sputtering technique. These samples had polycrystalline Bi-layered perovskite structure without preferred orientation, and...

  • Triclinic phase in tilted (001) oriented BiFeO3 epitaxial thin films. Li Yan; Hu Cao; Jiefang Li; Viehland, D. // Applied Physics Letters;3/30/2009, Vol. 94 Issue 13, p132901 

    We report a triclinic phase in perovskite BiFeO3 (BFO) epitaxial thin films grown on (130) and (120) oriented SrTiO3 substrates. The lattice constants of the BFO thin films changed with tilt of the substrates from (001) toward (110). These lattice parameters result from the epitaxially...

  • Growth, crystal structure, and properties of epitaxial BiScO3 thin films. Trolier-McKinstry, Susan; Biegalski, Michael D.; Wang, Junling; Belik, Alexei A.; Takayama-Muromachi, Eiji; Levin, Igor // Journal of Applied Physics;Aug2008, Vol. 104 Issue 4, p044102 

    Epitaxial thin films of BiScO3—a compound thermodynamically unstable under ambient conditions—were grown on BiFeO3-buffered SrTiO3 substrates. X-ray diffraction confirmed the reasonable crystalline quality of the films with a full width at half maximum of 0.58° in ω (004...

  • The effect of substrate roughness on the surface structure of TiO2, SiO2, and doped thin films prepared by the sol-gel method. KRZAK-ROŚ, JUSTYNA; FILIPIAK, JAROSŁAW; PEZOWICZ, CELINA; BASZCZUK, AGNIESZKA; MILLER, MIROSŁAW; KOWALSKI, MACIEJ; BĘDZIŃSKI, ROMUALD // Acta of Bioengineering & Biomechanics;2009, Vol. 11 Issue 2, p21 

    Pure and calcium-doped silica and titanium dioxide thin films were prepared by the sol--gel method. Two different metallic substrates, i.e. stainless steel (316L) and titanium alloy (Ti6Al4V), were used for thin film deposition. Physicochemical properties and roughness of the thin films derived...

  • Contact Angle of TiO2/SnO2 Thin Films Coated on Glass Substrate. SANGCHAY, Weerachai // Walailak Journal of Science & Technology;2014, Vol. 11 Issue 5-8, p429 

    The self-cleaning effect in terms of contact angle value and photocatalytic activity of TiO2 and TiO2/SnO2 thin films coated on glass substrate was measured. The thin films were prepared using a solgel dip coating technique and calcinated at a temperature of 500 °C for 2 h with a heating rate...

  • Temperature dependent tuning of the flat band voltages of TiO2/Si interfaces. Nasim, F.; Ali, A.; Bhatti, A. S.; Naseem, S. // Journal of Applied Physics;Dec2011, Vol. 110 Issue 11, p114517 

    In this work, we present study of charge accumulation at the TiO2/Si interfaces and its variation in the TiO2 thin films sputter-deposited on n-Si, p-Si, and B-implanted Si substrates at various growth temperatures. TiO2 films, deposited in an oxygen deficient environment, showed significant...

  • Structural, optical, and electrical properties of epitaxial titanium oxide thin films on LaAlO3 substrate. Sbaï, N.; Perrière, J.; Gallas, B.; Millon, E.; Seiler, W.; Bernard, M. C. // Journal of Applied Physics;Aug2008, Vol. 104 Issue 3, p033529 

    Titanium oxide thin films were prepared by pulsed-laser deposition on LaAlO3 single crystal substrate at 700 °C. Pure anatase films are obtained at high oxygen pressure (10-1 mbar), while the rutile phase is evidenced at low oxygen pressure (10-5 mbar) despite a large oxygen deficiency...

  • Tunable electronic transport properties of DyScO3/SrTiO3 polar heterointerface. Li, D. F.; Wang, Yan; Dai, J. Y. // Applied Physics Letters;3/21/2011, Vol. 98 Issue 12, p122108 

    Electronic transport properties of DyScO3/SrTiO3 polar heterointerface grown at different oxygen pressures are studied. This DyScO3/SrTiO3 polar heterointerface exhibits much higher charge mobility, up to 104 cm2 V-1 s-1, compared to the LaAlO3/SrTiO3 system due to relatively lower lattice...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics