Resonant electromechanical vibrations of piezoelectric shells of revolution (review)

Karlash, V.
April 2008
International Applied Mechanics;Apr2008, Vol. 44 Issue 4, p361
Academic Journal
Scientific results from studies on the resonant electromechanical vibrations of piezoceramic thin-walled shells of revolution, their fragments, and segmented cylinders are analyzed, systematized, and generalized. Considerable attention is focused on experimental studies of resonant vibrations. It is shown that the modes in which deformation occurs inphase throughout the volume are of the highest intensity in all piezoceramic shell structures


Related Articles

  • Resonant Electromechanical Vibrations of Piezoelectric Plates. Karlash, V. // International Applied Mechanics;Jul2005, Vol. 41 Issue 7, p709 

    The scientific results on the resonant electromechanical vibrations of piezoceramic plates in the form of disks, rings, and polygons obtained over the last 30 years are analyzed, systematized, and generalized. Emphasis is on experimental methods. It is shown that all piezoceramic plates have...

  • The decomposed form of the three-dimensional elastic plate. Wang, M.Z.; Zhao, B.S. // Acta Mechanica;2003, Vol. 166 Issue 1-4, p207 

    Summary. In 1992, Gregory [1] gave a rigorous proof about the decomposed form when stress is anti-symmetrical about the mid-plane. His proof is dependent on his previous works [3], [4], i.e., the Papkovich-Fadle eigenfunction expansion of bi-harmonic functions. In this paper, we give a new proof...

  • Equilibrium, stability and evolution of elastic plates under the combined effects of stress and surface diffusion. Norris, AN // Quarterly Journal of Mechanics & Applied Mathematics;May99, Vol. 52 Issue 2, p283 

    The particles in an elastic plate are permitted to move by a surface diffusion process subject to the constraint that the total free energy does not increase. The static equilibrium, the quasistatic linear stability, and the quasi-static nonlinear evolution of the surface are examined under...

  • A consistent solution of the problem of one-sided tension of an elastic plane with an astroidal hole. Ulitko, A.; Ostrik, V. // Journal of Mathematical Sciences;Oct2009, Vol. 162 Issue 2, p149 

    We consider the stress-strain state of an elastic plate with a hole in the form of an astroid under one-sided tension. The contact of edges of the hole near two opposite tips of the astroid is taken into account, which eliminates the contradiction with the classical solution concerning the...

  • A Mixed Criterion of Delayed Creep Failure Under Plane Stress. Golub, V. P.; Krizhanovskii, V. I.; Rusinov, A. A. // International Applied Mechanics;May2003, Vol. 39 Issue 5, p556 

    The paper discusses delayed creep failure criteria and their experimental justification. These criteria allow transition from the strength characteristics under uniaxial stress to the strength characteristics under plane stress. The criterion is chosen in the form of a mixed invariant that...

  • Stability of an Elastic System Consisting of a Ribbed Cylindrical Shell and Noncrossing Longitudinal Plates. Skosarenko, Yu. // International Applied Mechanics;Aug2004, Vol. 40 Issue 8, p923 

    The paper presents a method for stability analysis of an elastic system consisting of a ribbed cylindrical shell and noncrossing plates. The influence of the width and thickness of the plate on the buckling stresses and modes is analyzed

  • Axisymmetric thermoviscoelastoplastic state of thin laminated shells made of a damageable material. Galishin, A. // International Applied Mechanics;Apr2008, Vol. 44 Issue 4, p431 

    A technique for the determination of the axisymmetric thermoviscoelastoplastic state of laminated thin shells made of a damageable material is developed. The technique is based on the kinematic equations of the theory of thin shells that account for transverse shear strains. The...

  • Optimal shakedown design of plates. Atkociunas, J.; Rimkus, L.; Skar´┐Żauskas, V.; Jarmolajeva, E. // Mechanika;2007, Vol. 67 Issue 5, p14 

    In this paper the optimal shakedown of perfectly elastic-plastic bending metallic plates with strength and stiffness constraints are considered. The geometry of the plate and its acting variable repeated load are known. Here optimal distribution of limit bending moments or characteristic...

  • WAVE PROPAGATION IN PLATES OF ANISOTROPIC MEDIA ON THE BASIS EXACT THEORY. VERMA, K. L. // Annals of the Faculty of Engineering Hunedoara - International J;Sep2011, Vol. 9 Issue 3, p287 

    The wave propagation in plates of general anisotropic media is investigated on the basis of an exact theory. Initially a formal analysis of waves in anisotropic elastic plate with 21 independent elastic constants is considered. Calculation is then carried forward for more specialized cases...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics