TITLE

Laser joining titanium-aluminum structures

PUB. DATE
July 2008
SOURCE
Industrial Laser Solutions;Jul2008, Vol. 23 Issue 7, p4
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
The article reports on the simulation of the joining process of a hybrid seat track assembled from titanium and aluminum components. It notes that the development process is supported by thermal and thermo-mechanical simulation using FEM-Software. Information on the welding process of the seat track construct is also provided.
ACCESSION #
33304184

 

Related Articles

  • Case Study--National Steel Car, Hamilton, Ontario.  // Welding Design & Fabrication;May2001, Vol. 74 Issue 5, p33 

    Presents a study on developing guaranteed welding process with fracture resistance to an assortment of common weld defects and operator variables in Hamilton, Ontario. Comparison of National Steel Car weldments to dynamic tear and transition temperature tests; Resistance of Transferred Ionized...

  • Estimation of Cooling Rate in the Welding of Plates with Intermediate Thickness. Poorhaydari, K.; Patchett, B. M.; Ivey, D. G. // Welding Journal;Oct2005, Vol. 84 Issue 10, p149s 

    Presents the innovative method for estimating the actual cooling rate in a welded section. Application of a weighting factor to the Rosenthal analytical solutions for thick and thin plates; Effect of the microstructural changes on the property.

  • TRACTION BEHAVIOUR SIMULATION OF SPOT WELDED. Catana, D. // DAAAM International Scientific Book;Jan2010, p575 

    For a lot of production areas but particularly for automotive industry spot welding is one of the mostly used welding procedures. Most of these welding spots are arranged in line but this displacement is not always the best choice regarding traction behaviour. There are situations when no...

  • OSTENÄ°TÄ°K PASLANMAZ ÇELÄ°KLERÄ°N KAYNAÄžINDA KAYNAK YÖNTEMÄ°NÄ°N MEKANÄ°K ÖZELLÄ°KLERE ETKÄ°SÄ°NÄ°N Ä°NCELENMESÄ°. Kölük, Fatih; Gülenç, Behçet // Teknoloji;Oct-Dec2004, Vol. 7 Issue 4, p693 

    In this study the number of austenitic stainless steel samples were prepared in the different welding groove and then welded with multi pass by using various welding techniques. The mechanical properties of welded metal were experimentally investigated; tensile strength and hardness of weldment...

  • Suitability of high-alloyed flux-cored wire electrodes for laser-GMA hybrid welding. Lorenz, Stephan; Kannengiesser, habil. Thomas; Posch, Gerhard // Welding & Cutting;2012, Issue 3, p181 

    The article presents a study which investigates the suitability and qualification of flux-cored wire electrodes for the laser-GMA hybrid welding of high-alloyed steels. The study performed the laser-GMA hybrid welding tests in which parameter ranges were established to gain a reproducible high...

  • Thermal modeling in composite transmission laser welding process: light scattering and absorption phenomena coupling. Akué Asséko, André chateau; Cosson, Benoît; Schmidt, Fabrice; Gilblas, Rémi; Le Maoult, Yannick; Lafranche, Eric // Key Engineering Materials;2014, Vol. 611-612, p1560 

    In previous studies [1, 2], we have presented a detailed formulation of a macroscopic analytical model of the optical propagation of laser beams in the case of unidirectional thermoplastic composites materials. This analytical model presented a first step which concerns the estimation of the...

  • Structural Steel Contractor Gains 30-Percent Productivity Increase.  // Penton's Welding Magazine;Jun2008, Vol. 81 Issue 6, p52 

    The article focuses on the advantages of using Lincoln's UltraCore 71C gas-shielded fluxcored wire for contractor Owen Steel Co. Inc. It says that the new wire offered a 30% productivity increase in initial testing, while 15% was observed in actual usage. Owen Steel chief operating officer Isaac...

  • STRUCTURAL HETEROGENEITIES VS. OVERALL MECHANICAL PERFORMANCE OF DISSIMILAR LASER HYBRID WELDED JOINTS. IORDACHESCU, Mihaela; VALIENTE, Andr�s; IORDACHESCU, Danut; RUIZ-HERVIAS, Jes�s; TORRES, Elena; CUESTA, Alberto // Metalurgia International;May2011, Vol. 16 Issue 5, p141 

    No abstract available.

  • TWI streamlines total asset management solutions.  // Connect (TWI);Jan/Feb2013, Issue 182, p3 

    The article reports on the non-destructive testing (NDT) and asset integrity management activities of research and technology firm TWI Ltd. It mentions that the company has integrated both to provide a holistic asset management solution for its industrial members and external customers. It also...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics