TITLE

Sonoelectrochemical deposition of calcium phosphates on carbon materials: effect of current density

AUTHOR(S)
Han, H. M.; Phillips, G. J.; Mikhalovsky, S. V.; FitzGerald, S.; Lloyd, A. W.
PUB. DATE
April 2008
SOURCE
Journal of Materials Science: Materials in Medicine;Apr2008, Vol. 19 Issue 4, p1787
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Calcium phosphate (CaP) coatings on carbon fabric substrate were produced by sonoelectrodeposition at different current densities (5, 8, 13, 20 and 34 mA/cm2). The surface morphology and chemical composition of the coatings were characterized by SEM, Raman and FTIR spectra. The results showed that at 5 mA/cm2 current density, the coating exhibits plate-like morphology, indicating an octacalcium phosphate (OCP) phase was pre-formed in the deposits and then converted into hydroxyapatite (HA). When the current density was increased to 8 mA/cm2 and higher, the coatings exhibited needle-like morphology corresponding to a HA phase. Furthermore, the sonoelectrodeposited CaP coating exhibited denser and more uniform structures with smaller crystal sizes as the current density increased. Cathodic reaction mechanisms of CaP coatings on carbon in the sonoelectrochemical processes are proposed to explain the different kinds of calcium phosphate obtained.
ACCESSION #
31244642

 

Related Articles

  • Characterisation of calcium phosphate/titanium dioxide hybrid coatings. Boyd, A. R.; Burke, G. A.; Duffy, H.; Cairns, M. L.; O'Hare, P.; Meenan, B. J. // Journal of Materials Science: Materials in Medicine;Feb2008, Vol. 19 Issue 2, p485 

    The role of titanium dioxide (TiO2) as a means to engender enhanced stability into calcium phosphate (Ca-P) coatings has been well recognised. Several different methods have been used to create such Ca-P/TiO2 hybrid layers on a range of substrates. This paper reports the properties of a...

  • Synthesis and Characterization of Multilayered Diamond Coatings for Biomedical Implants. Booth, Leigh; Catledge, Shane A.; Nolen, Dustin; Thompson, Raymond G.; Vohra, Yogesh K. // Materials (1996-1944);May2011, Vol. 4 Issue 5, p857 

    With incredible hardness and excellent wear-resistance, nanocrystalline diamond (NCD) coatings are gaining interest in the biomedical community as articulating surfaces of structural implant devices. The focus of this study was to deposit multilayered diamond coatings of alternating NCD and...

  • A new method for the preparation of bioactive calcium phosphate films hybridized with 1α,25-dihydroxyvitamin D3. Jae-Young Jung; Yun-Jung Hong; Yong Seok Choi; Sunjoo Jeong; Woo-Kul Lee // Journal of Materials Science: Materials in Medicine;Dec2009, Vol. 20 Issue 12, p2441 

    The primary goal of this investigation was to develop a calcium phosphate film hybridized with 1α,25-dihydroxyvitamin D3 for the improvement of osteoconductivity of bone substitutes. The hybrid films (hCaP) were prepared at the different concentrations of 1 × 10−10, 1 ×...

  • Mechanical properties of three different compositions of calcium phosphate bioceramic following immersion in Ringer’s solution and distilled water. Hsu, Y. H.; Turner, I. G.; Miles, A. W. // Journal of Materials Science: Materials in Medicine;Dec2009, Vol. 20 Issue 12, p2367 

    Dissolution tests were carried out to compare the mechanical properties of calcium phosphate based bioceramics with different compositions, before and after ageing for various time periods in Ringer’s solution (pH 7.2) or distilled water (pH 7.2 and 4.0) at 37°C. The results indicate...

  • The effect of tri-calcium phosphate (TCP) addition on the degradation of polylactide-co-glycolide (PLGA). Ehrenfried, Lisa; Patel, Munnawwar; Cameron, Ruth // Journal of Materials Science: Materials in Medicine;Jan2008, Vol. 19 Issue 1, p459 

    This paper investigates the effects of α-tri-calcium phosphate (α-TCP) addition on the properties of polylactide-co-glycolide (PLGA). Samples with additions of 5, 10, 15, 20, 30 and 40 wt% α-TCP were prepared via a hotpressing method. Long-term in vitro studies (up to 60 days) were...

  • Calcium Phosphate Materials for Bone Repair Application. Li, Xiaoming; Huang, Jin; Fan, Yubo // Recent Patents on Biomedical Engineering;Aug2011, Vol. 4 Issue 2, p68 

    Calcium phosphates, with a composition and structure similar to the mineral phase of bone, have been recognized as satisfactory materials for bone repair because of their excellent biocompatibility, osteoconductive, and bioactivity. In this paper, the recent related patents are reviewed,...

  • Apatite formation on titanium substrates by electrochemical deposition in metastable calcium phosphate solution. Kawashita, Masakazu; Itoh, Satomi; Miyamoto, Kazunori; Takaoka, Gikan H. // Journal of Materials Science: Materials in Medicine;Jan2008, Vol. 19 Issue 1, p137 

    An apatite layer was successfully formed on titanium substrates by electrochemical deposition in a metastable calcium phosphate solution, which had 1.5 times the ion concentrations of a normal simulated body fluid, but did not contain MgCl2·6H2O, at 41 °C for 40 or 60 min at 13 mA. The...

  • A PLA/calcium phosphate degradable composite material for bone tissue engineering: an in vitro study. Charles-Harris, Montse; Koch, Martin A.; Navarro, Melba; Lacroix, Damien; Engel, Elisabeth; Planell, Josep A. // Journal of Materials Science: Materials in Medicine;Apr2008, Vol. 19 Issue 4, p1503 

    Biodegradable polymers reinforced with an inorganic phase such as calcium phosphate glasses may be a promising approach to fulfil the challenging requirements presented by 3D porous scaffolds for tissue engineering. Scaffolds’ success depends mainly on their biological behaviour. This...

  • The thermal stability of hydroxyapatite in biphasic calcium phosphate ceramics. Nilen, R. W. N.; Richter, P. W. // Journal of Materials Science: Materials in Medicine;Apr2008, Vol. 19 Issue 4, p1693 

    Biphasic calcium phosphate ceramics (BCP) comprising a mix of non-resorbable hydroxyapatite (HA) and resorbable β-tricalcium phosphate (β-TCP) are particularly suitable materials for synthetic bone substitute applications. In this study, HA synthesised by solid state reaction was...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics