Gearhouse builds future tents

February 1999
Marketing Event;Feb99, p25
Provides information on Tensil 1, a family of structures that can be configured in eight basic formats to suit exhibitors, from Gearhouse Structures company.


Related Articles

  • TENSILE FACADES. Murray, Rowan // Architecture Australia;Nov/Dec2009, Vol. 98 Issue 6, p121 

    The article discusses the opportunities presented by tensile facades of buildings in Australia. Tensile architecture is said to show the context and experiences of the building owners. According to the authors, elements are selectively filtered by building facade and tensile facade is more...

  • AIDS DAY ON STAGE. Moles, Steve // SRO, Staging Rental Operations;Jan/Feb2004, Vol. 3 Issue 1, p23 

    Provides information on how the World AIDS Day concert in Cape Town, South Africa was staged and produced. Comments from concert producer Robbie Williams; Role of Gearhouse in the event; Problems encountered by head rigger Peter Joubert in the roof and staging systems; Companies that provided...

  • Gearhouse completes name change to MCL. Chadwick, Philip // Marketing Event;May2001, p5 

    Reports that the Northern and Midlands division of Gearhouse has completed its rebranding as MCL in April 2001 in England. Reason for the move of MCL; Equipment provided by MCL during the Capital Radio 2001 Awards Lunch.

  • Hydrogen Degradation of High-Strength Weldable Steels in Seawater. Cwiek, J.; Nikiforov, K. // Materials Science;Nov2004, Vol. 40 Issue 6, p831 

    Hydrogen degradation of high-strength weldable steels was evaluated under monotonic static tensile loading in seawater at room temperature. Two types of quenched and tempered steels and their submerged-arc welded and shielded-metal-arc welded joints were examined. The slow-strain-rate tests were...

  • MAGNETIC METHODS: Lift-off influence analysis during the micromagnetic stress evaluation of flexible riser tensile armours. Martins, C. O. D.; Reguly, A. // Insight: Non-Destructive Testing & Condition Monitoring;Jun2010, Vol. 52 Issue 6, p316 

    In some applications, the detection of defects is not enough for safety control. In these situations, non-destructive techniques must be adapted for stress analysis. This work improves the development of a micromagnetic stress analysis method to be applied for the stress measurements of flexible...

  • GLASS AND CARBON FIBER CONCRETE MICROMECHANICAL AND MACROMECHANICAL PROPERTIES. Krasnikovs, Andrejs; Khabbaz, Amjad; Shahmenko, Genadijs; Lapsa, Videvuds // Transport & Engineering;2008, Vol. 28, p132 

    Adding short glass or carbon fibers to concrete new mechanical material behaviour is achieved- material starts to behave as plastic. When fiber volume fraction is more than 0.5% significantly increase the tensile strength. Performing experiments with relatively high fiber content (1% - 4%)...

  • Experimental setup and realization of thin film specimens for microtensile tests. Malhaire, Christophe; Seguineau, Cédric; Ignat, Michel; Josserond, Charles; Debove, Laurent; Brida, Sebastiano; Desmarres, Jean-Michel; Lafontan, Xavier // Review of Scientific Instruments;Feb2009, Vol. 80 Issue 2, pN.PAG 

    This paper describes a microtensile test system and the design as the realization of the samples dedicated to the tensile experiments. Two different technologies for the development of miniaturized specimens are detailed: self-standing tensile samples sustained by silicon frames and metal on...

  • Time and Temperature Dependent Fatigue Strengths for Three Directions of Unidirectional CFRP. Miyano, Y.; Nakada, M. // Experimental Mechanics;Apr2006, Vol. 46 Issue 2, p155 

    This paper is concerned with the characterization of time and temperature dependent fatigue strengths for three loading directions of unidirectional CFRP, that is, the longitudinal tensile and compressive directions as parallel to the fiber direction and the transverse tensile direction as...

  • Designing and Building with TENSILE ARCHITECTURE. Roth, Michele // Construction Canada;Jan2015, Vol. 57 Issue 1, p8 

    The article offers information on tensile architecture. Tensile architecture allows design flexibility and can be used for projects of different sizes. A major team player in tensile architecture projects is the specialty contractor for tensile membrane structures. According to the author, the...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics