Culbreath, Tadasha E.; Davis, Gail M.
April 2000
Journal of the American Dental Association (JADA);Apr2000, Vol. 131 Issue 4, p493
Academic Journal
Presents a process of treating internal resorption using a dual-cure syringeable composite resin in conjunction with a bonding agent within the defect. Definition of internal resorption; Materials needed in the treatment; Strengthening of the remaining tooth structure.


Related Articles

  • THE SPECTRUM OF COMPOSITES: NEW TECHNIQUES AND MATERIALS. Fortin, Daniel; Vargas, Marcos A. // Journal of the American Dental Association (JADA);Jun2000 Supplement, Vol. 131 Issue 6, p26S 

    Reviews advances in composite-based resin materials for dental practice. Composition and classification of resin-based composite; Techniques for successful placement of materials; Concepts of polymerization.

  • SECTION 11: Flasking, Packing, Processing, and Recovery. Sowter, John B. // Removable Prosthodontic Techniques;1986, p87 

    Chapter 11 of the book "Removable Prosthodontic Techniques" is presented. It is inferred that festooned wax dentures must be converted to resin to make a mold into which denture base is inserted and cured. It details the method of flasking and packing dentures. There are many methods of flasking...

  • The Effect of pH on the Cytotoxicity of Eluates From Denture Base Resins. Lefebvre, Carol A.; Schuster, George S.; Marr, John C.; Knoernschild, Kent L. // International Journal of Prosthodontics;Mar/Apr1995, Vol. 8 Issue 2, p122 

    This in vitro study examined the effects of environmental pH on elution of potentially toxic substances from heat-, light-, and dual- (chemical plus light) polymerized denture base resins. Eluates were prepared by daily transfer of disks to fresh buffers at pH 4.0, 5.0, and 6.8 over a 5-day...

  • Adhesion of Restorations to Impression Materials. Millstein, Philip L.; Maya, Alvaro; Segura, Jose C. // International Journal of Prosthodontics;Mar/Apr1995, Vol. 8 Issue 2, p129 

    Three impression materials, Impregum, Permadyne, and Reprosil, were tested with three restorative materials, Lodestar, Dispersalloy, and Concise. Polished cylindrical samples of each restorative material with and without a collar design were used tot impression retention testing. A pullout test...

  • The Effect of Glutaraldehyde and Microwave Disinfection on Some Properties of Acrylic Denture Resin. Polyzois, Gregory L.; Zissis, Alkibiades J.; Yannikakis, Stavros A. // International Journal of Prosthodontics;Mar/Apr1995, Vol. 8 Issue 2, p150 

    This study evaluated the effect of disinfection methods on the dimensional stability, flexural properties, and microhardness of a heat-polymerized denture acrylic resin. A 1- and 12-hour immersion period in 2% alkaline glutaraldehyde, and 3- and 15-minutes exposure to microwaves were employed as...

  • Influence of Surface Treatment on Bond Strength Between a Heat-Activated and a Light-Activated Resin Composite. Guzman, Andres; Moore, B. Keith // International Journal of Prosthodontics;Mar/Apr1995, Vol. 8 Issue 2, p179 

    The shear bond strength of two light-activated resin composite materials to a preformed heat-polymerized resin material was measured. The substrate was a urethane dimethacrylate material designed for use as a direct bonded pontic. In the first phase of the study, the shear bond strength between...

  • Hard and soft relines of removable appliances with visible light-cured resins. Bruggers, Karen // Quintessence of Dental Technology (QDT);1992, Vol. 15, p131 

    The article presents a pictorial overview of a technique in fabricating chairside hard and soft reclines using visible light-cured (VLC) resins. The incorporation of VLC composite resins into removable prosthedonties provided possibilities for use in fabricating custom trays. The material used...

  • EXPERIMENTAL EVALUATION OF DIFFERENT FILLERS IN DENTAL COMPOSITES IN TERMS OF MECHANICAL PROPERTIES. Hambire, Umesh Vishnu; Tripathi, Vipin Kumar // Journal of Engineering & Applied Sciences;Feb2012, Vol. 7 Issue 2, p147 

    The aim of this study was to evaluate in vitro the influence of nano-sized filler particles and agglomerates of nano particles (nano cluster) in resin based dental composite material. Four commercially available resins based dental composites-Filtek Z250, Filtek Supreme, Filtek Z100 (3M ESPE, St...

  • Techniques.  // Quintessence International;Aug1982, Vol. 13 Issue 8, p825 

    The article discusses how dentists can provide improved services to their patients through new materials and new techniques. It is stated that some skills are required for using these techniques; and those who graduated from dental schools many years ago were not trained in the use of...


Read the Article


Sign out of this library

Other Topics