Whip Mix launches new division

January 2008
Proofs;Jan2008, Vol. 91 Issue 1, p75
Trade Publication
The article announces that Whip Mix Corp. has launched Whip Mix Laboratory Services, a company division that will offer the Verus System, a technology that produces high quality, high value copings and abutments in Metoxit zirconia and glass-fiber-reinforced plastics. According to the article, the system uses proprietary milling technology to produce a true featheredge margin that does not require additional finishing. The division provides a significant advancement in outsourced milling.


Related Articles

  • Fiber-reinforced technology in multidisciplinary chairside approaches. Arhun, Neslihan; Arman, Ayca // Indian Journal of Dental Research;Jul2008, Vol. 19 Issue 3, p272 

    There is an increasing demand to improve dentofacial esthetics in the adult population. This demand usually requires a close collaboration within the various disciplines of dentistry and the patient at every stage of the therapy. The materials and techniques used by these interdisciplinary...

  • An experimental study on the cutting tool performance during milling of carbon fiber reinforced polymer. Shu Han; Youhong Gong; Nihong Yang; Shengchao Han // Key Engineering Materials;2014, Vol. 589/590, p179 

    Carbon Fiber Reinforced Plastic (CFRP) is widely used in aerospace field as an advanced composite material. Recently, more and more studies are focused on milling of CFRP with its increasing applications. In this paper, three different milling tools were chosen, and a systematic analysis on...

  • Optimization of milling parameters of CFRP for surface roughness using Taguchi design method. ZHOU Jingwen; CHEN Yan; FU Yucan; XU Jiuhua; HU Andong; LIU Siqi // Advanced Materials Research;2014, Vol. 1027, p76 

    End milling is conducted on carbon fiber reinforced plastics (CFRP) by using a diamond coated cemented carbide tool. Taguchi design method is employed to investigate the influence of cutting speed, feed rate and depth of cut on surface roughness. In Taguchi method, a three level orthogonal array...

  • TOOL WEAR DURING MILLING LAMINATED CARBON FIBRE REINFORCED PLASTIC. Khairusshima, M. K. Nor; Amin, A. K. M.; HASSAN, C. H. CHE; Jaharah, A. G. // Advanced Materials Research;2015, Vol. 1115, p96 

    Carbon fibre reinforced plastic (CFRP) is a composite which has the best strength to weight ratio among the construction materials. It becomes valuable as the demand for this composite has increased dramatically especially in automobile and aerospace industry. Cutting speed of 160-194 m/min and...

  • Influence of Tool Shape and Coating Type on Machined Surface Quality in Face Milling of CFRP. FURUKI, Tatsuya; HIROGAKI, Toshiki; AOYAMA, Eiichi; KODAMA, Hiroyuki; OGAWA, Keiji // Advanced Materials Research;2014, Issue 1017, p310 

    Since demands for Carbon Fiber Reinforced Plastics (CFRP) are increasing, the number of the studies on machining of CFRP is also increasing. However, since there are already reports on a trimming of a surplus portion or a drilling, we focus on a face machining and a generating the step shape...

  • Face Milling of Carbon Fiber Reinforced Plastic using Poly Crystalline Diamond Tool. KUSUYAMA, Jumpei; YUI, Akinori; KITAJIMA, Takayuki; ITOH, Yosuke // Advanced Materials Research;2014, Issue 1017, p383 

    Carbon Fiber Reinforced Plastic (CFRP) is a high-strength and high-elastic-modulus composite material that is hardened by impregning carbon fiber with epoxy resin. Although, many sutdies of hole drilling of CFRP have been conducted, few sutdies of face milling of CFRP have been carried out. Face...

  • Proposal of tilt helical milling method for hole creation of carbon fiber reinforced plastic (CFRP). Yongbo Wu; Qiang Wang; Mitsuyoshi Nomura // Advanced Materials Research;2015, Vol. 806, p190 

    Carbon fiber reinforced plastic (CFRP) are used for various aircraft structural components because of their superior mechanical and physical properties such as high specific strength, high specific stiffness, etc. In order for CFRP materials to be used in aircraft structures or machine elements,...

  • Experimental Study on Micro Milling of Carbon Fiber Reinforced Plastics. Xian Wu; Liang Li; Ning He; Xiuqing Hao // Materials Science Forum;2016, Vol. 836/837, p185 

    Recently the demands for miniature component of varying materials have been rapidly increasing in aerospace industry. Carbon fiber reinforced plastics is widely used as functional or structural material due to its superior material properties. It also is one of the difficult to machine materials...

  • Influence of Fiber Orientation on Machined Surface Quality in Milling of Unidirectional CFRP Laminates. Changying Wang; Liang Wen; Chengdong Wang; Hongzhou Zhang; Qinglong An; Ming Chen // Advanced Materials Research;2016, Vol. 1136, p137 

    Machined surface quality is the deciding factor when evaluating the machinability of CFRP. This present work concerns the influence of fiber orientation on the machined surface quality of the machined surface in terms of surface morphology and surface roughness during milling of unidirectional...


Read the Article

Courtesy of

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics