TITLE

Instrumental characterization of clay by XRF, XRD and FTIR

AUTHOR(S)
Nayak, Preeti Sagar; Sing, B. K.
PUB. DATE
June 2007
SOURCE
Bulletin of Materials Science;2007, Vol. 30 Issue 3, p235
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Instrumental characterizations of the clay were performed by different techniques such as XRF, XRD and FTIR. XRF shows the chemical compositions of the clay where Al-oxide and silica oxide are present in major quantity whereas XRD confirms the presence of these minerals in clay. FTIR studies show the presence of quartz, alumina, haematite and different mineral matters.
ACCESSION #
25561940

 

Related Articles

  • Chemical characterization of Cretan clays for the design of restoration mortars. Budak, Meral; Maravelaki-Kalaitzaki, Pagona; Kallithrakas-Kontos, Nikolaos // Microchimica Acta;Aug2008, Vol. 162 Issue 3/4, p325 

    Three clays and a marly-limestone from the West of Chania, Crete, fired at temperatures ranging from 200 to 1200 °C, were characterized by XRD, FTIR, EDXRF and wet chemical analyses. The aim of this study was to assess the pozzolanic and hydraulic properties of these materials for potential...

  • Thermal and SO adsorption properties of some clays from Turkey. Sakizci, Meryem; Erdoğan Alver, Burcu; Yörükoğullari, Ertuğrul // Journal of Thermal Analysis & Calorimetry;Feb2011, Vol. 103 Issue 2, p435 

    Thermal and structural properties of three clays (sepiolite and two kaolinites) from Turkey were studied by thermal analysis (TG-DTA), X-ray diffraction (XRD), X-ray fluorescence (XRF), Fourier transform infrared (FT-IR), and surface area measurement techniques The adsorption of sulfur dioxide...

  • Characterization for Post-treatment Effect of Bagasse Ash for Silica Extraction. Worathanakul, Patcharin; Payubnop, Wisaroot; Muangpet, Akhapon // World Academy of Science, Engineering & Technology;Aug2009, Issue 32, p360 

    Utilization of bagasse ash for silica sources is one of the most common application for agricultural wastes and valuable biomass byproducts in sugar milling. The high percentage silica content from bagasse ash was used as silica source for sodium silicate solution. Different heating temperature,...

  • Mechanical Modification of Khulays Clay; Structural and Textural Effects. Al-Qunaibit M., M.; Al Juhaiman, L. // International Journal of Electrical & Computer Sciences;Dec2012, Vol. 12 Issue 6, p205 

    Samples of Bentonite-Clay from Khulays region in Saudi Arabia were subjected to mechanical grinding using an agate mortar for 30, 60, and 120 minutes. X-ray diffraction (XRD) patterns of the ground samples exhibited a lack of amorphization. The mean d(001) value and crystallite size were shifted...

  • Growth of hydrophobic TiO on wood surface using a hydrothermal method. Sun, Qingfeng; Lu, Yun; Liu, Yixing // Journal of Materials Science;Dec2011, Vol. 46 Issue 24, p7706 

    Hydrophobic titanium dioxide (TiO) was successfully grown on a wood surface using a hydrothermal method. Energy dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and water contact angle (WCA) were employed to characterize the features...

  • The Preparation of High Alumina Content Alumina Sol. Jianjun Yin; Min Li; Zhongdong Zhang; Dong Wang; Shuai Shao; Xionghou Gao // Applied Mechanics & Materials;2014, Issue 528, p118 

    The alumina sol with high content of Al2O3 was prepared by peptizing aluminum hydroxide powder. The properties of the alumina sol were characterized by Fourier transform-infrared (FT-IR) spectrum, zeta potential analyzer, X-ray diffraction (XRD) and Transmission electron microscope (TEM). The...

  • Enhanced Blue Green Emission of ZnO Nanorods Grown by Hydrothermal Method. Zare, Karim; Molahasani, Nasibeh; Farhadyar, N.; Sadjadi, M. S. // Journal of Nano Research;2013, Vol. 21, p43 

    In this paper, we report enhanced blue green emission of hexagonal shaped ZnO nanorods (NRS) grown via a simple hydrothermal method and silica coated then by using tetraethoxysilane (TEOS). The composition and structural characteristic of the prepared samples were studied by X-ray diffraction...

  • Síntese e caracterização de zeólita de cinzas de carvão modificada por surfactante catiônico. Fungaro, D. A.; Borrely, S. I. // Ceramica;Jan-Mar2012, Vol. 58 Issue 345, p77 

    No abstract available.

  • The combined effects of molar concentration of the precursor solution and fluorine doping on the structural and electrical properties of tin oxide films. Chinnappa, L.; Ravichandran, K.; Saravanakumar, K.; Muruganantham, G.; Sakthivel, B. // Journal of Materials Science: Materials in Electronics;Dec2011, Vol. 22 Issue 12, p1827 

    Undoped and fluorine doped tin oxide (FTO) films have been fabricated by employing a simplified and inexpensive spray technique using perfume atomizer at comparatively lesser substrate temperature (320 °C). The combined effects of molar concentration of the precursor solution and fluorine...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics