TITLE

Electrical properties of EVA filled by zinc powder

AUTHOR(S)
Subiela, J. R.; López, J.; Balart, R.; García-Jareño, J. J.; Vicente, F.
PUB. DATE
October 2006
SOURCE
Journal of Materials Science;Oct2006, Vol. 41 Issue 19, p6396
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Elastic composites of zinc powder directly dispersed within an EVA (ethylene-vinyl acetate) matrix were prepared by a hot plates procedure. Conductance of samples depends on the filler content in three different regimes: polarization, tunnelling effect and percolation. The surface corrosion was monitored by means of optical, SEM and EDX methods, and after that the loss of mass was checked. The corrosion only affects to the zinc particles placed of the surface of the composite samples.
ACCESSION #
22751128

 

Related Articles

  • Corrosion protection of AA6061 T6-10 % Al2O3 composite by molybdate conversion coatings. Hamdy, Abdel Salam; Beccaria, Anna Maria; Traverso, Pierluigi // Journal of Applied Electrochemistry;May2005, Vol. 35 Issue 5, p467 

    The corrosion protection performance of aluminum composite materials was investigated in 3.5% NaCl solution for time ranging between 1-60 days. Series of specimens were treated in molybdate solutions under different conditions. Free immersion and electrochemical activation techniques were used...

  • Development of scientific investigations in the field of corrosion and corrosion protection of materials in Ukraine. Pokhmurs’kyi, V. // Materials Science;Sep2008, Vol. 44 Issue 5, p609 

    The article discusses various studies that investigate the corrosion and corrosion protection of materials in Ukraine. The study conducted by researchers headed by H. V. Samsonov, I. M. Fedorchenko and other experts in the field of development of new composite materials and coating is cited....

  • The kinetics of corrosion of E-glass fibres in hydrochloric acid. Jones, R. L.; Betz, D. // Journal of Materials Science;Sep2004, Vol. 39 Issue 18, p5633 

    The corrosion of glass fibres in acid solution is well known and is thought to be responsible for many instances of failure in glass reinforced plastic materials. Although it is generally accepted that cations are leached from the glass matrix into the acid solution, the precise chemical...

  • 'Quebracho' tannin derivative and boosters biocides for new antifouling formulations. Bellotti, N.; Deyá, C.; Amo, B.; Romagnoli, R. // Journal of Coatings Technology & Research;Sep2012, Vol. 9 Issue 5, p551 

    The growth of fouling communities on ships' hulls causes economic losses due to increased fuel consumption and to the deterioration of the metallic substrate by corrosion. Antifouling paints are formulated to avoid the settlement of these organisms and may contain biocides as active compounds....

  • Three-parameter Weibull distribution model for tensile strength of GFRP bars based on experimental tests. Tu, J. W.; Guo, D. L.; Mei, S. T.; Jiang, H. C.; Li, X. P. // Materials Research Innovations;May2015 Supplement s5, Vol. 19, pS5-1191 

    Concrete structures with fibre-reinforced plastic bars can solve steel corrosion problems very effectively. At present, glass fibre-reinforced plastic bars are more widely used among fibre-reinforced plastic bars. Different from steel bars, glass fibre-reinforced plastic bars have no yield stage...

  • Corrosion inspection method of steam generator tubes using acoustic emission technique. Hou, S.; Luo, J.; Shen, T.; Xu, J. // Materials Research Innovations;May2015 Supplement s5, Vol. 19, pS5-1237 

    Acoustic emission technique has been applied as the real-time and non-destructive inspection of corrosion on steam generator tubes. The corrosion signals gathered about steam generator tubes in service have been analysed. The detailed analysis reveals that the crack development of the heat...

  • PROSPECTS AND CHALLENGES OF COMPOSITES IN A DEVELOPING COUNTRY. Haruna, V. N.; Abdulrahman, A. S.; Zubairu, P. T.; Isezuo, L. O.; Abdulrahman, M. A.; Onuoha, D. C. // Journal of Engineering & Applied Sciences;Jul2014, Vol. 9 Issue 7, p1069 

    In spite of the tremendous progress that has been made in the discipline of material science and engineering, there still remain technological challenges, including the development of even more sophisticated and specialized materials such as composite materials. This research is geared towards...

  • Synthesis-microstructure-mechanical properties-wear and corrosion behavior of an Al-Si (12%)—Flyash metal matrix composite. Ramachandra, M.; Radhakrishna, K. // Journal of Materials Science;Nov2005, Vol. 40 Issue 22, p5989 

    In the present investigation, Aluminium based metal matrix composite containing up to 15% weight percentage of flyash particulates were successfully synthesized using vortex method. The properties like density, hardness, microhardness, ductility and ultimate tensile strength were investigated....

  • High-temperature corrosion of electric-arc coatings sprayed from powder core wires based on the Fe—Cr—B—Al system. Student, M.; Dzioba, Yu.; Hvozdets’kyi, V.; Pokhmurs’ka, H.; Wielage, B.; Grund, T. // Materials Science;Sep2008, Vol. 44 Issue 5, p693 

    We study the kinetics of oxidation of electric-arc dispersion-hardened coatings of the Fe–Cr–B–Al system alloyed with 6% Ni, 3% W, 1% Mo, and 1% V by spraying from powder-core wires at 700 °C. The coatings 0.5 mm in thickness were applied to plates of low-carbon steel by...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics