Step-down converter is 97% efficient

July 2006
Electronics Weekly;7/26/2006, Issue 2251, p30
Trade Publication
The article reports that a 1.5A DC-DC stepdown converter has been introduced by Texas Instruments Inc. The converter is 97 percent efficient and supports an adjustable input voltage range from 1.8V to 3.8V. The equipment can control the point-of-load power supply from a fixed 3.3V, 2.5V or 1.8V input voltage.


Related Articles

  • Converter extends battery life.  // EDN;6/22/2006, Vol. 51 Issue 13, p32 

    The article focuses on TPS63000 buck-boost converter from Texas Instruments (TI). The converter was designed to power portable products that utilize single-cell lithium-ion battery or two- or three-cell, alkaline, nickel-cadmium or nickel-metal-hydride battery. TI said that the converter will...

  • Research and Design for Cascade SVG Control System. Y. C. Zhang; Q. Yang; L. J. Huo; Y. F. Zhang; X. Hu; S. B. Qian; B. Li // Applied Mechanics & Materials;2014, Issue 543-547, p776 

    This paper researchs alternating current decoupling control and DC capacitor voltage balance control for cascade SVG. The DC capacitor voltage balance control method has advantages of good stability and wide regulation range which uses the active voltage vectors of each module. The active...

  • DC-DC Converter IC Packs Two 12-A MOSFETs. Bindra, Ashok // Electronic Design;10/1/2001, Vol. 49 Issue 20, p40 

    Reports the release of direct current (dc)-dc converter integrated circuits by Texas Instruments. Features of the product; Capabilities of the converter; Cost of the product.

  • Extract the most from lithium-ion batteries. Prophet, Graham // EDN Europe;Apr2002, Vol. 47 Issue 4, p13 

    Features the monolithic step-down dc/dc converters from single-cell lithium-ion battery by Texas Instruments. Product usage; Design and specifications; Availability of the product.

  • Comparison of DC-DC Converters for Photo-Voltaic Application. Chilambarasan, M.; Ramesh Babu, M.; Jones Basil, T. // Applied Mechanics & Materials;2015, Vol. 787, p864 

    Electricity demand is a major concern in the world today. To meet this demand, a number of natural sources are used for electricity production. The produced electrical energy from these natural sources will be given to consumers after going through a lot of conversion stages. So losses mostly...

  • Digital Simulation of Dynamic Voltage Restorer (DVR) for Voltage Sag Mitigation. Sasikala, Chintapudi; Reddy, Vyza China Veera; Reddy, Vyza. Usha // International Journal of Applied Engineering Research;2009, Vol. 4 Issue 11, p2235 

    The dynamic voltage restorer (DVR) as a means of series compensation for mitigating the effect of voltage sags has established as a preferred approach for improving power quality at sensitive load locations. Mean while, the cascaded multilevel type of power converter topology has also become a...

  • Power Quality and Power Interruption Enhancement by Universal Power Quality Conditioning System with Storage Device. Davudi, M.; Torabzad, S.; Ojaghi, B. // Australian Journal of Basic & Applied Sciences;2011, Vol. 5 Issue 9, p1180 

    In this paper a novel design of Universal Power Quality Conditioning System (UPQS) is proposed which is composed of the DC/DC converter and the storage device connected to the DC link of UPQS for balancing the voltage interruption. The proposed UPQS can balance the reactive power, harmonic...

  • ENERGY EFFICIENCY PRODUCTS.  // ECN: Electronic Component News;Dec2007, Vol. 51 Issue 15, p20 

    The article evaluates the low-input voltage DC/DC boost converter from Texas Instruments Inc., Control Integrated Power System (CiPoS) modules from Infineon Technologies AG, and miniaturized energy harvesting sensing nodes ESG-Link from Microstrain, Inc.

  • Piggy-back design boosts efficiency rates. Wilson, Richard // Electronics Weekly;6/16/2010, Issue 2432, p18 

    The article offers information on the new converter designs of Texas Instruments Inc. It mentions that the company has cut down the size of contemporary half-bridge converter designs by placing two metal oxide semiconductor field-effect transistors (mosfets) on top of each other in a package...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics