NS Group Broadens Tube-Making Capabilities

August 2006
Metal Center News;Aug2006, Vol. 46 Issue 9, p51
Trade Publication
The article reports on the move of NS Group Inc. in Newport, Kentucky to expand its tube-making and heat treating capacity which totals to $98.0 million in the U.S. NS Group's total seamless tubular capacity will increase from the current level of approximately 266,000 tons to 319,000 tons per year. According to President and CEO Rene J. Robichaud, their tube mill has been running at capacity since January 2004 and the projects will allow them to better serve their customers with an additional popular size.


Related Articles

  • A Quench-and-Temper Technique for Evaluating Carburized Case Depths. Herring, Daniel H. // Industrial Heating;Sep2009, Vol. 76 Issue 9, p18 

    The article presents information about an accurate quench-and-temper method to measure carburized case depths during heat treatment of steel. The process austenitizes a small sample in either a salt bath or a standard laboratory box furnace. For the determination of case depth within 0.002 inch,...

  • Process Control Including Process-Gas Control. Pye, David // Industrial Heating;Sep2009, Vol. 76 Issue 9, p120 

    The article presents suggestions on efficient metallurgical processes. It is stated that the incoming basic process gas must be of a repeatable and consistent quality in terms of oxygen content, bulk storage equipment maintenance and bulk storage pressure. The control of the process parameters...

  • Study of impregnation- corrosion of Al2O3-MgO refractory castables by secondary metallurgy steel ladle slags. Prigent, Pascal // Industrial Ceramics;Dec2010, Vol. 30 Issue 3, p209 

    Refractory castables containing alumina-magnesia/self-forming spine! (MgAl2O4) are used in impact pads of steel ladles in steelmaking processes. In order to understand the wear mechanisms of refractory materials, several recipes were tested from a corrosion, slag resistance and thermal shock...

  • Estimation of the effect of heat treatment of wire rope with different C and Mn content on values of new quality indicator W. Gotis, Bogdan; Pilarczyk, Jan W.; Budzik, Ryszard; Gala, Marek; Wludzik, Rafal // Wire Journal International;Nov2009, Vol. 42 Issue 11, p60 

    The article presents a study which analyzes the effect of heat treatment of wire rope composed of different Carbon (C) and Manganese (Mn) content. These study investigated the mechanical and technological properties of the wire and calculation of indicators. It notes the conclusion and findings...

  • Spray formed bearing steel insensitive to distortion Part I Material characterization. Cui, C.; Fritsching, U.; Schulz, A.; Bauckhage, K.; Mayr, P. // Journal of Materials Science;Sep2004, Vol. 39 Issue 18, p5639 

    To minimize the distortion of bearing steel components during manufacturing processes, 100Cr6 steel (SAE 52100) has been produced by spray forming as an alternative approach to conventional continuous casting process. Material characteristics and distortion behavior of the spray formed 100Cr6...

  • 15B35H BORLU ÇELÄ°GÄ°NÄ°N KURU KAYMA KOÅžULLARINDA SÃœRTÃœNME VE AÅžINMA DAVRANIÅžININ Ä°NCELENMESÄ°. Er, Ümit // Journal of the Institute of Science & Technology of Dumlupinar U;2011, Issue 25, p75 

    Recently, boron steels are the materials getting more widely used in engineering applications. It is the fact that investigations of tribological properties of the materials have economically great importance. In this study, dry sliding wear behaviour of untreated, hardened with water quenching...

  • Research on nitrogen control technology of high-pressure bottle steel. Chen Jun // Advanced Materials Research;2014, Vol. 988, p177 

    Nitrogen content of the high-pressure bottle steel was high and with big fluctuation, it is difficult to control. SO, investigation on nitrogen content of the all steelmaking process is carried out. Results of the investigation indicated that nitrogen content of the aimed steel was high,...

  • Making the Difference in Heat Treat. Ramchandran, Raman // Industrial Heating;Mar2009, Vol. 76 Issue 3, p39 

    The article features the vital role of the heat treater in the manufacture of gears. It mentions that in-house heat treat is the basis for the consistency in results from the pilot run to the production run. Its consistency is possible using controls such as operating the fixturing of the loads,...

  • Ipsco Ventures into Heat Treating.  // Metal Center News;Sep2004, Vol. 44 Issue 10, p62 

    Ipsco Inc. has begun building a steel plate heat-treating complex, which will product both quench and tempered and normalized steel plate. This complex is part of the company's strategy to increase its value-added mix and better meet customers' needs. The Q&T product range will be in thicknesses...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics