Active-pixel CMOS sensors improve their image

Zarnowski, Jeffrey; Pace, Matthew
July 1999
Laser Focus World;Jul99, Vol. 35 Issue 7, p111
Discusses the development of complementary metal oxide semiconductor (CMOS) imagers. Categories of traditional imagers; Application in electronic optical devices; Passive pixel CMOS arrays; Active-pixel sensors.


Related Articles

  • Bridging the green gap. Anderson, Stephen G. // Laser Focus World;Oct2009, Vol. 45 Issue 10, p7 

    The article discusses various reports published within the issue, including one on the development of green-emitting laser diodes from Sumitomo and Osram Opto Semiconductors, another one on the development of the optically pumped semiconductor laser (OPSL) which is another green laser...

  • Nanocrystal research targets optoelectronic components. Walters, Robert J.; Biteen, Julie S.; Bourianoff, George I.; Atwater, Harry A. // Laser Focus World;Sep2004, Vol. 40 Issue 9, p77 

    Focuses on the potential of silicon nanocrystals as optoelectronic components. Integration of traditional compound-semiconductor optical materials with standard CMOS processing; Limitation of silicon-nanocrystal optoelectronic devices; Importance of plasmonic-enhanced light emission; Persistence...

  • Experimental investigation of plasmofluidic waveguides. Bonwoo Ku; Jin-Soo Shin; Min-Suk Kwon // Applied Physics Letters;11/16/2015, Vol. 107 Issue 20, p201104-1 

    Plasmofluidic waveguides are based on guiding light which is strongly confined in fluid with the assistance of a surface plasmon polariton. To realize plasmofluidic waveguides, metal-insulatorsilicon- insulator-metal (MISIM) waveguides, which are hybrid plasmonic waveguides fabricated using...

  • Investigation on the optimized design of alternate-hole-defect for 2D phononic crystal based silicon microresonators. Wang, Nan; Hsiao, Fu-Li; Tsai, J. M.; Palaniapan, Moorthi; Kwong, Dim-Lee; Lee, Chengkuo // Journal of Applied Physics;7/15/2012, Vol. 112 Issue 2, p024910 

    This paper shows the design, fabrication, and characterization of the Bloch-mode micromechanical resonators made by creating alternate defects to form a resonant cavity on a two-dimensional silicon phononic crystal slab of square lattice. The length of the resonant cavity (L) and the...

  • With Proper isolation, You Won't Need To Do The Safety Dance. SABOLCIK, ROSS // Electronic Design;3/7/2013, Vol. 61 Issue 3, p18 

    The article focuses on the use of isolator devices such as optocouplers, transformers, or modern CMOS capacitive-based isolation devices for protecting people from electric shock. Optocouplers use an LED for shining light onto a phototransistor which decodes the signal to reconstruct the signal...

  • CMOS SENSOR.  // Design News;10/25/2004, Vol. 60 Issue 15, p36 

    Cites OmniVision Technologies' OV5610 CMOS image sensor. Number of megapixels; Optical format; Targeting of the high-end camera market; Converter's capability.

  • Heterogeneous integration of InGaAsP microdisk laser on a silicon platform using optofluidic assembly. Tien, Ming-Chun; Ohta, Aaron T.; Yu, Kyoungsik; Neale, Steven L.; Wu, Ming C. // Applied Physics A: Materials Science & Processing;Jun2009, Vol. 95 Issue 4, p967 

    Heterogeneous integration of InGaAsP microdisk lasers on a silicon platform is demonstrated experimentally using an optofluidic assembly technique. The 200-nm-thick, 5- and 10-μm-diameter microdisk lasers are fabricated on InP and then released from the substrates. They are reassembled on a...

  • ROI processing offers opportunities. Butler, Mark; Humphrey, Neil // Vision Systems Design;May2006, Vol. 11 Issue 5, p31 

    Focuses on region-of-interest processing (ROI) in imaging systems. Importance of ROI in retaining the high resolution of images; Information on charge coupled device (CCD) partial scanning; Comparison between the ROI capabilities of CCD and complementary metal oxide semiconductors.

  • Picture perfect. Rowe, Matin // Test & Measurement World;Mar2005, Vol. 25 Issue 2, p25 

    Discusses the project description of FillFactory, a division of Cypress Semiconductor Corp., on the designs and manufacturers of CMOS image sensors. Measurement of an automated test system on the signal output of CMOS image sensors during design verification; Performance of the test system on...

  • Eldim's Digital Camera Evaluates Product Quality.  // Quality Progress;Apr2004, Vol. 37 Issue 4, p73 

    The company Eldim has developed a scientific-grade complementary metal oxide semiconductor (CMOS) sensor based digital camera called LABcom. Using CMOS, the LABcom allows individual pixel addressing through a dedicated processor in which the user can control sensor saturation and exposure to...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics