TITLE

Some macro- and microstructural aspects of pad welded layer durability

AUTHOR(S)
Pękalski, G.; Dudziński, W.; Sachadel, U.; Alenowicz, J.
PUB. DATE
April 2005
SOURCE
Archives of Civil & Mechanical Engineering (Oficyna Wydawnicza P;2005, Vol. 5 Issue 2, p85
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The results of macroscopic and microscopic investigation, hardness tests and abrasive wear out tests of different pad welded layers made with thirty nine kinds of electrodes are presented. Defectiveness of the layers was connected with a foreseen character of their wear out. The possibility of simplifying the chemical composition of electrodes without deterioration of application properties of pad welded layers was shown. The paper was focused on the investigation results of pad welded layers applied in opencast lignite mining and in power industry.
ACCESSION #
20983894

 

Related Articles

  • Influence Principles of Linear-weld-line Tailor-weld Blanks' Formability with different Thickness of Base Metals. Yong GAN; Hanchao WANG // Applied Mechanics & Materials;2014, Issue 556-562, p507 

    Discussing the influence between the linear-weld-line TWBs' different thickness of base metal and the formability of sheet by Dynaform FEM simulations technology and Dome test. Meanwhile, the correlation with the difference thickness of base metal and the limit doming height, weld-line movement...

  • Effect of modification of the surface on the hydrogen permeability of reactor steels and their welded joints. Fedorov, V. V.; Zasadnyi, T. M. // Materials Science;Sep2009, Vol. 45 Issue 5, p644 

    We study the characteristics of hydrogen permeability of 10Kh9VFA and 12Kh18N10T reactor steels in the intact state and in the presence of welds and analyze the influence of oxidation and irradiation with protons on these characteristics. It is shown that the proton irradiation increases the...

  • EFFECT OF TENSILE SPEED ON THE FAILURE LOAD OF A SPOT WELD UNDER COMBINED LOADING CONDITIONS. JUNG-HAN SONG; HOON HUH; JI-HO LIM; SUNG-HO PARK // International Journal of Modern Physics B: Condensed Matter Phys;4/30/2008, Vol. 22 Issue 9-11, p1469 

    This paper is concerned with the evaluation of the dynamic failure load of the spot weld under combined axial and shear loading conditions. The testing fixture are designed to impose the combined axial and shear load on the spot weld. Using the proposed testing fixtures and specimens,...

  • Identification of Material Property Changes Due to Impact Testing by Ultrasonic Harmonic Measurement. Lee, SamLai; Chang, KeeOk; Kim, ByoungChul; Shim, ChulMoo // AIP Conference Proceedings;2005, Vol. 760 Issue 1, p1416 

    Ultrasonic analysis using a non-linearity measurement through a relative attenuation change at a different harmonic frequency for the unbroken as well as the broken Charpy impact specimens which were composed of base and weld metal has been performed in order to understand the metallurgical...

  • THE DETERMINATION OF THE CHARACTERISTICS OF A WELDING TRANSFORMER WITH DAQ SYSTEM. SUCIU, Lenuta; MARTA, Constantin; TATUCU, Iancu; BIZAU, Viorel; LUPINCA, Cinca Ionel; ROSU, Monica // Annals of DAAAM & Proceedings;Jan2009, p587 

    The paper presents the determination of the characteristics of the idle running of welding transformers with the LabVIEW data acquisition system. The application part of the paper aims at presenting the acquisition of several signals from an electric welding transformer, among which the...

  • Destructive and Non-Destructive Inspection of Dissimilar Aluminium Joints Welded by Friction Stir Welding Process. SARSILMAZ, Furkan; ÖZEL, Serkan; CANDAN, İihan // Journal of Natural & Applied Sciences;2009, Vol. 13 Issue 1, p88 

    In this study, AA 5754 (AlMg3) and AA 5083 (AlMg4,5MnO,7) aluminum plates having different chemical and mechanical properties were welded by using friction stir welding (FSW) process. In order to determine the effect of different rotational and traverse speeds on joints the mechanical tests...

  • Strength and stressed state of asymmetric mechanically inhomogeneous welded joints with incomplete fusion at the center of the weld under biaxial loading. Ostsemin, A. // Strength of Materials;Sep2009, Vol. 41 Issue 5, p570 

    An approximate solution of the plane problem of the theory of plasticity for main pipelines, cylindrical vessels, and shell structures subjected to biaxial loading is proposed which allows one to perform theoretical analysis aimed at evaluation of strength and stressed state of asymmetric...

  • Estimating microdamage tendencies from standard uniaxial stretching tests. Efimenko, L.; Konovalova, O.; Sarafanova, Ya.; Ivanova, Yu. // Chemical & Petroleum Engineering;Nov2006, Vol. 42 Issue 11/12, p720 

    Test results for several steels are presented on the tendency to microdamage in relation to the composition and structural state. A method is proposed that incorporates the tendency to microdamage in relation to the structural state of the main metal and of welded joints.

  • Magnetic Pulse Welding Technology. Jassim, Ahmad K. // Iraqi Journal for Electrical & Electronic Engineering;2011, Vol. 7 Issue 2, p169 

    In this paper, the benefits of using Magnetic Pulse machine which is belong to Non-conventional machine instead of conventional machine. Magnetic Pulse Technology is used for joining dissimilar metals, and for forming and cutting metals. It is a non contact technique. Magnetic field is used to...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics