TITLE

Improvements on metallic ion beams at GANIL with the large-capacity oven

AUTHOR(S)
Lehérissier, P.; Lemagnen, F.; Canet, C.; Barué, C.; Dupuis, M.; Flambard, J. L.; Dubois, M.; Gaubert, G.; Jardin, P.; Lecesne, N.; Leroy, R.; Pacquet, J. Y.
PUB. DATE
March 2006
SOURCE
Review of Scientific Instruments;Mar2006, Vol. 77 Issue 3, p03A318
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In the last two years the development of the large-capacity oven was continued. First tests on-line with calcium, lead, tin and magnesium beams were achieved. We successfully produced 30 μA of Ca9+, 13 μA of Pb23+, 8 μA of Sn21+, and 50 μA of Mg7+. Some deformation of the filament appeared when working at high temperature. Several configurations of the filament and the use of an alternate power supply have been tested to solve this problem. The beam’s intensities and the ionization efficiencies were improved in comparison with the standard microoven performances. The results of magnesium beam, 110 μA of Mg5+ obtained with the “MIVOC” method are compared with those using the oven technique.
ACCESSION #
20618128

 

Related Articles

  • High-Throughput Top-Down Fabrication of Uniform Magnetic Particles. Litvinov, Julia; Nasrullah, Azeem; Sherlock, Timothy; Yi-Ju Wang; Ruchhoeft, Paul; Willson, Richard C. // PLoS ONE;May2012, Vol. 7 Issue 5, p1 

    Ion Beam Aperture Array Lithography was applied to top-down fabrication of large dense (108-109 particles/cm2) arrays of uniform micron-scale particles at rates hundreds of times faster than electron beam lithography. In this process, a large array of helium ion beamlets is formed when a stencil...

  • First Results From A Multi-Ion Beam Lithography And Processing System At The University Of Florida. Gila, Brent; Appleton, Bill R.; Fridmann, Joel; Mazarov, Paul; Sanabia, Jason E.; Bauerdick, S.; Bruchhaus, Lars; Mimura, Ryo; Jede, Ralf // AIP Conference Proceedings;6/1/2011, Vol. 1336 Issue 1, p243 

    The University of Florida (UF) have collaborated with Raith to develop a version of the Raith ionLiNE IBL system that has the capability to deliver multi-ion species in addition to the Ga ions normally available. The UF system is currently equipped with a AuSi liquid metal alloy ion source...

  • Static and dynamic properties of laterally coupled DFB lasers based on InAs/InP QDash structures. Kaiser, W.; Mathwig, K.; Deubert, S.; Reithmaier, J.P.; Forchel, A.; Parillaud, O.; Krakowski, M.; Hadass, D.; Mikhelashvili, V.; Eisenstein, G. // Electronics Letters;7/7/2005, Vol. 41 Issue 14, p808 

    Laterally coupled, complex distributed feedback lasers based on AlInGaAs/InAs/InP quantum dash layers were fabricated by maskless focused ion beam lithography. Continuous-wave powers above 30 mW at room temperature, sidemode suppression ratios of 44 dB and a modulation bandwidth of 7.6 GHz were...

  • Controlled formation of individually seeded, electrically addressable silicon nanowire arrays for device integration. Ying-Lan Chang; Sung Soo Yi; Chow, Edmond; Girolami, Grant; Yim Young; Maozi Liu; Albuschies, Jörg; Amano, Jun // Applied Physics Letters;11/27/2006, Vol. 89 Issue 22, p223123 

    The formation of large-scale arrays of individually seeded, electrically addressable Si nanowires with controlled dimension, placement, and orientation is demonstrated. Electron beam evaporated gold nanoparticles were used for nanowire synthesis. By controlling the lithography and metal...

  • Pattern transfer of 1μm sized microgap and microbridge electrode for application in biomedical nano-diagnostics. Rao, B. Sharma; Hashim, U. // Advanced Materials Research;2014, Issue 925, p533 

    We present a new design of biochip for application in clinical diagnostics by using a conventional method of pattern transfer process in microelectronic fabrication. Although there are many advanced techniques available to produce nanostructures such as electron beam lithography (EBL), ion-beam...

  • ALG steps up ion beam lithography R&D. Berger, Jeffrey // Electronic News;12/4/95, Vol. 41 Issue 2094, p64 

    Declares that the Advanced Lithography Group (ALG) is seeking to produce research and development (R&D) results for ion beam lithography. Diagram of the prototype ALG-1000.

  • H- beam based projection microlithography: A conceptual study of the beam parametersa). Guharay, S. K.; Reiser, M.; Dudnikov, V. G. // Review of Scientific Instruments;May94, Vol. 65 Issue 5, p1745 

    The current trends of research and development work in ion-beam microlithography are examined with particular emphasis on the choice of ion sources and the beam parameters. The common approach with duoplasmatron-type ion sources for projection ion-beam lithography is revisited, and the...

  • MEDEA's lithography project.  // Solid State Technology;Mar98, Vol. 41 Issue 3, pS3 

    Focuses on the ion-projection lithography (IPL) project under Europe's MEDEA project. Funding from the governments of Austria, Germany and the Netherlands; Participating companies; Other technologies to be explored under the project.

  • High-resolution focused ion beam lithography. Matsui, Shinji; Kojima, Yoshikatsu; Ochiai, Yukinori // Applied Physics Letters;9/5/1988, Vol. 53 Issue 10, p868 

    The resolution of focused ion beam (FIB) lithography has been studied by proximity effect measurement and fine pattern fabrication. In the proximity effect measurement, a 0.1 μm line pattern, according to the gap between square and line patterns, could be achieved. Moreover, 0.1 μm line...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics