Investigating the post-chemiluminescence behavior of phenothiazine medications in the luminol�potassium ferricyanide system: molecular imprinting�post-chemiluminescence method for the determination of chlorpromazine hydrochloride

Weifen Niu; Na Feng; Fei Nie; Jiuru Lu
May 2006
Analytical & Bioanalytical Chemistry;May2006, Vol. 385 Issue 1, p153
Academic Journal
A new post-chemiluminescence (PCL) phenomenon was observed when phenothiazine medications were injected into the reaction mixture after the chemiluminescence (CL) reaction of luminol and potassium ferricyanide had finished. A possible reaction mechanism was proposed based on studies of the kinetic characteristics of the CL, CL spectra, fluorescence spectra, and on other experiments. The feasibility of determining various phenothiazine medications by utilizing these PCL reactions was examined. A molecular imprinting�post-chemiluminescence (MI-PCL) method was established for the determination of chlorpromazine hydrochloride using a chlorpromazine hydrochloride-imprinted polymer (MIP) as the recognition material. The method displayed high selectivity and high sensitivity. The linear range of the method was 1.0�10-8~1.0�10-6, with a linear correlation coefficient of 0.9985. The detection limit was 3�10-9 g/ml chlorpromazine hydrochloride, and the relative standard deviation for a 1.0�10-7 g/ml chlorpromazine hydrochloride solution was 4.0% ( n=11). The method has been applied to the determination of chlorpromazine hydrochloride in urine and animal drinking water with satisfactory results. [Figure not available: see fulltext.]


Related Articles

  • Synthesis of Potassium Tetratitanate-Based Molecularly Imprinted Polymer for Selective Adsorption of Dibenzothiophene. Xu, Wanzhen; Zheng, Xudong; Gan, Mengying; Zhu, Wenjing; Zhang, Yunlei; Yan, Yongsheng // Adsorption Science & Technology;2013, Vol. 31 Issue 10, p917 

    A potassium tetratitanate-based molecularly imprinted polymer (MIP) was prepared by surface molecule-imprinting technique, which involves coating potassium tetratitanate whiskers with silica and modification with 3-methacryloxypropyltrimethoxysilane. The structural properties of the synthesized...

  • Molecular imprinting method for on-line enrichment and chemiluminescent detection of the organophosphate pesticide triazophos. Chenggen Xie; Hankun Zhou; Shan Gao; Huaifen Li // Microchimica Acta;Dec2010, Vol. 171 Issue 3/4, p355 

    molecularly imprinted polymer (MIP) was synthesized by the precipitation polymerization method using triazophos (TAP) as the template. The MIP can selectively absorb TAP from sample solutions. The absorbed TAP strongly enhances the chemiluminescence (CL) of luminol-HO. This was applied to design...

  • Detection of template binding to molecularly imprinted polymers by Raman microspectroscopy. Kantarovich, Keren; Belmont, Anne-Sophie; Haupt, Karsten; Bar, Ilana; Gheber, Levi A. // Applied Physics Letters;5/11/2009, Vol. 94 Issue 19, p194103 

    We report on sensitive and specific detection and quantification of a template in a molecularly imprinted polymer (MIP) using Raman microspectroscopy. The β-blocking drug S-propranolol and its enantiomer, R-propranolol, were used as target molecules since the selectivity of this MIP is well...

  • Thermal desorption characterisation of molecularly imprinted polymers. Part II: Use of direct probe GC–MS analysis to study crosslinking effects. Holland, Niamh; Duggan, Patrick; Owens, Eleanor; Cummins, Wayne; Frisby, June; Hughes, Helen; McLoughlin, Peter // Analytical & Bioanalytical Chemistry;Jun2008, Vol. 391 Issue 4, p1245 

    A powerful method utilising direct probe thermal desorption GC–MS is presented for the study of molecularly imprinted polymers (MIPs). A series of 2-aminopyridine (2-apy)-imprinted methacrylic acid–ethyleneglycol dimethacrylate (MAA–EGDMA) copolymers were prepared under...

  • An inversion procedure for oscillatory continuum spectra: Method and application to NaK. LeRoy, Robert J.; Keogh, William J.; Child, Mark S. // Journal of Chemical Physics;10/15/1988, Vol. 89 Issue 8, p4564 

    An inversion procedure is developed for determining an attractive potential energy well from the structure of an oscillatory absorption or emission continuum originating in a single vibrational level of that well. It is successfully applied to synthetic data for the 1Π1u←X(1Σ+g)...

  • Mössbauer spectroscopy investigation of K2FeF5·H2O in the helium-3 temperature range. Takács, L.; Reiff, W. M. // Journal of Applied Physics;4/15/1987, Vol. 61 Issue 8, p3667 

    Presents a study which performed Mö ssbauer spectroscopy on the quasi-one-dimensional complex potassium[sub 2]iron fluorine[sub 5-]hydrogen dioxide. Sample preparation; Crystal structure of potassium[sub 2]iron fluorine[sub 5-]hydrogen dioxide; Temperature dependence of the Mö ssbauer...

  • Chemiluminescence determination of metformin based on hydroxyl radical reaction and molecularly imprinted polymer on-line enrichment. Chao He; Zhujun Zhang; Deyong He; Yan Xiong // Analytical & Bioanalytical Chemistry;May2006, Vol. 385 Issue 1, p128 

    A novel and simple chemiluminescence (CL) method has been developed and validated for determination of metformin. This method is based on hydroxyl radical chemiluminescence�the hydroxyl radical generated by reaction of Cu(II) and hydrogen peroxide oxidizes rhodamine B (RhB) to produce weak...

  • Flow injection chemiluminescence sensor using core-shell molecularly imprinted polymers as recognition element for determination of dapsone. Lu, Fuguang; Yang, Jinlong; Sun, Min; Fan, Lulu; Qiu, Huamin; Li, Xiangjun; Luo, Chuannan // Analytical & Bioanalytical Chemistry;Nov2012, Vol. 404 Issue 1, p79 

    This paper reports the preparation of dapsone (DDS) imprinted polymer layer-coated silica submicron particles (SiO) combined with chemiluminescence (CL) toward analysis of tracing DDS in practical samples. To induce the selective occurrence of surface polymerization, the amino groups were first...

  • Emission spectra of SiF3. Suto, Masako; Han, J. C.; Lee, L. C.; Chuang, T. J. // Journal of Chemical Physics;3/1/1989, Vol. 90 Issue 5, p2834 

    Emission spectra of SiF3 radical were observed from photodissociative excitation of SiF4 at 99.1, 95.5, and 92.3 nm. The spectra show a broad visible band in the 350–800 nm region, a UV band in 290–340 nm, and a weak band in 240–280 nm. The visible band resembles the...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics