TITLE

CL surface deformation approach for a 5-axis tool path generation

AUTHOR(S)
Su-Jin Kim; Dong-Yoon Lee; Hyun-Chul Kim; Sung-Gun Lee; Min-Yang Yang
PUB. DATE
March 2006
SOURCE
International Journal of Advanced Manufacturing Technology;Mar2006, Vol. 28 Issue 5/6, p509
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In this paper, the 5-axis tool path that has been generated on the cutter contact (CC) surface is generated on the cutter location (CL) surface, and the CL surface deformation approach that inversely deforms the 3-axis tool path generated on the deformed CL surface to a 5-axis tool path is introduced. The CL point computation and interference check based on the CL surface is faster and more robust than that based on the CC surface. The proposed CL surface deformation approach can be used if the orientation of the cutter is predefined. By the CL surface deformation approach, the 5-axis tool path generation time can be reduced to that of a 3-axis, since the complexity of a CL surface deformation is linear and because the 3-axis tool path generation and gouge removal algorithms are used at the deformed CL surface .
ACCESSION #
20329899

 

Related Articles

  • Off-line longitudinal deformometer. Vostrikov, V.; Akinin, A.; Krivetskii, A.; Kuratov, K. // Journal of Mining Science;Nov2005, Vol. 41 Issue 6, p588 

    A prototype of an off-line apparatus is developed to detect deformations, wave processes, parameters, and electromagnetic radiation in block rock masses.

  • Deformation potentials of CdSe quantum dots. Li, Jingbo; Wang, Lin-Wang // Applied Physics Letters;10/4/2004, Vol. 85 Issue 14, p2929 

    The size-dependent deformation potentials of CdSe quantum dots are studied by first-principle and semiempirical pseudopotential calculations. We find that the amplitude of the quantum dot deformation potential is only slightly larger than the bulk value, and this increase is mostly caused by the...

  • IMPROVEMENT OF THE IMPACT ENERGY ABSORBTION EFFICIENCY FOR DEFORMABLE SAFETY BARRIERS MADE FROM COMPOSITES. JIGA, Gabriel; PASTRAMA, Stefan Dan; DOBRESCU, Tiberiu; POPOVICI, Dorina // Annals of DAAAM & Proceedings;Jan2009, p573 

    The main purpose of deformable safely barriers is linked to the dissipation of impact energy associated with the re-guiding of the vehicle on the carriageway. From this point of view, laminated composite materials offer a viable alternative, the specific mode of failure for their structure...

  • Manifestations of non-Heisenberg interactions in the temperature dependence of the NMR frequency... Kalita, V.M.; Lozenko, A.F. // Low Temperature Physics;Apr97, Vol. 23 Issue 4, p293 

    Discusses the use of the hypothesis of a non-Heisenberg nature of interionic interactions for describing anomalies in the temperature dependence of lattice deformation of a nickel chloride crystal. Estimation of non-Heisenberg spin-spin interactions from the temperature dependence of the...

  • A four component lattice model for nonaqueous microemulsions made with nonionic surfactants. Martino, A.; Schick, M.; Kaler, E. W. // Journal of Chemical Physics;12/1/1990, Vol. 93 Issue 11, p8228 

    A simple four component lattice model is used to reproduce qualitatively phase behavior of nonaqueous microemulsions. In microemulsions where glycerol and propylene glycol replace water, 2_-3-2 phase transitions are observed as the glycerol content in the polar organic mixture increases. The...

  • Bicontinuous phase in a lattice model for surfactant mixtures. Ciach, A.; Ho\ye, J. S.; Stell, G. // Journal of Chemical Physics;10/1/1991, Vol. 95 Issue 7, p5300 

    A lattice counterpart of a bicontinuous phase is found in a three-dimensional lattice model of ternary surfactant mixtures. The structure of this phase is determined and discussed. The region of stability of the new phase in the parameter space is found at zero temperature. Also determined are...

  • Dynamics of a classical particle in a field with a nonstationary potential. Chikhachev, A. // Technical Physics;Aug2010, Vol. 55 Issue 8, p1226 

    The behavior of a classical particle overcoming an obstacle in the form of a rectangular well or rectangular barrier with an increasing transverse size is studied. It is shown that the particle accelerates when overcoming the expanding barrier.

  • Mean Force Potential between H3O+ and Cl— Ions in Molecular Water Clusters: 1. Atmospheric Surface Layer Conditions. Shevkunov, S. V. // Colloid Journal;Jul/Aug2004, Vol. 66 Issue 4, p495 

    A method for calculating mean force potential for particles in systems with high potential barriers was developed. It was shown that the hydration of HCl resulted in the formation of molecular water clusters, which remained thermodynamically stable at 313 K. Two minima separated by the barrier...

  • Quantum diffusion: effect of defect-localized phonon dynamics. Hizhnyakov, V.; Benedek, G. // European Physical Journal B -- Condensed Matter;Feb2005, Vol. 43 Issue 4, p431 

    The quantum diffusion of lattice defects is considered on the basis of the non-perturbative description of the quadratic defect-lattice coupling. This allows to take explicitly into account the effect of defect-localized phonon dynamics. This effect is especially important in the case of...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics