TITLE

Main/camera cell phone LED driver

PUB. DATE
March 2006
SOURCE
Portable Design;Mar2006, Vol. 12 Issue 3, p32
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
This article discusses the light emitting diodes in mobile phones. The LTC3210 is a synthesized 800-kHz 1x/1.5x/2x multimode charge for pump intended for the drivers of the main and camera LEDs in cell phones. Five LED current sources are supplied with a current value of 500-mA of the total output current for a 4x25-mA LED main display and a high current value of 400-mA LED display. Its voltage input ranges from 2.9 to 4.5 volts and is used for Li-Ion cellular applications. Two resistors are set as maximum currents for the display set.
ACCESSION #
20233213

 

Related Articles

  • Users demand color displays but not the excess baggage. Nass, Richard // Portable Design;Apr2004, Vol. 10 Issue 4, p37 

    The light emitting diodes (LED) that light the cellular phone displays are one of the larger power draws in the system. For that reason, system designers want to reduce the number of LEDs needed, but without impacting the display's readability. According to Madhu Rayabhari, marketing director of...

  • Microscopic LEDs could speed up wireless communication. Harris, Stephen // Engineer (Online Edition);1/25/2013, p8 

    The article focuses on the use of light for wireless communication, which according to a study led by Strathclyde University makes it faster compared when using radio signals. The British team used microscopic light emitting diodes (LED) lights found that such technology could potentially...

  • UVOC-MAC: a MAC protocol for outdoor ultraviolet networks. Li, Yiyang; Ning, Jianxia; Xu, Zhengyuan; Krishnamurthy, Srikanth; Chen, Gang // Wireless Networks (10220038);Aug2013, Vol. 19 Issue 6, p1101 

    As an alternative to radio-frequency (RF) communications, optical wireless communications can support high data rates and low power operations while providing good jamming resistance. Our focus in this paper is on deep ultraviolet (UV) outdoor communications (UVOC) where solar blind and...

  • Visible Light Wireless Communication for Audio Signals. Vibin, A. M.; Prince, Shanthi // AIP Conference Proceedings;10/20/2011, Vol. 1391 Issue 1, p377 

    In the current century there is an increased demand for broad band wireless access for satisfying different customer needs. These applications requires large amount of frequency resources for its efficient implementation. Radio Frequency techniques, which dominate the current wireless...

  • Using Light Sensors to Extend Battery Life. Wong, Mike; Schmitz, Tamara // Wireless Design & Development;Feb2008, Vol. 16 Issue 2, pS3 

    The article compares several ambient light sensor technologies for power management. It explains by applying the ambient light sensing in conjunction with light-emitting diode backlight driving where one can significantly reduce power consumption and increase battery life in a portable/cell...

  • Simple battery-status indicator uses two LEDs. Deshpande, Abhijeet // EDN;8/12/2010, Vol. 55 Issue 15, p45 

    The article describes a circuit which serves as a battery-status indicator by using two light-emitting-diodes (LED). The circuit, which works in most rechargeable batteries, is composed of a reference LED, LEDREF, which operates at a constant current of 1 mA and provides reference light of...

  • Use a photoelectric-FET optocoupler as a linear voltage-controlled potentiometer. Rako, Paul; Granville, Fran // EDN;1/19/2012, Vol. 57 Issue 2, p78 

    The article discusses the use of a photoelectric field effect transistor (FET) as a variable resistor or a potentiometer in combination with a fixed resistor. It notes that this kind of FET can safely control high-voltage circuit parameters due to its isolation voltage. A simple feedback...

  • Untitled.  // Electronics Weekly;4/11/2012, Issue 2503, p24 

    The author reports on the methods of powering a grounded light emitting diode (LED) from a grounded supercapacitor including using a resistor or implementing a buck/boost converter. It states use of a resistor will mean brightness is dependent on capacitor voltage and implementing a buck/boost...

  • Inhomogeneous luminance in organic light emitting diodes related to electrode resistivity. Neyts, Kristiaan; Marescaux, Matthias; Nieto, Angel Ullan; Elschner, Andreas; Lövenich, Wilfried; Fehse, Karsten; Huang, Qiang; Walzer, Karsten; Leo, Karl // Journal of Applied Physics;12/1/2006, Vol. 100 Issue 11, p114513 

    In organic light emitting diodes (OLEDs) with transparent electrodes, the luminance usually becomes inhomogeneous if the size of the pixel increases above 10 mm. A theoretical model for inhomogeneous voltage and luminance in OLEDs is provided together with an approximate analytical solution for...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics