TITLE

Highly integrated voltage supervisors

PUB. DATE
March 2006
SOURCE
Portable Design;Mar2006, Vol. 12 Issue 3, p28
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
The article discusses the use of the highly integrated voltage supervisors. The MCP1316-MCP1322 family with 10 voltage supervisors include a manual reset, a watchdog timer, push-pull or open-drain reset output combinations, and factory trip-points from 2 Volts that offers 100-mV increments. This mechanism is used in temperatures ranging from -40 degrees Celsius up to 125 degrees Celsius. The highly integrated voltage supervisors controls the activity of the microprocessor in digital systems. Its normal power consumption is 5µA.
ACCESSION #
20233207

 

Related Articles

  • Peculiarities of Linear Induction Machine, Operating at the Mode of Phase Regulator. Karaliūnas, B.; Matkevičius, E.; Radzevičius, L. // Electronics & Electrical Engineering;2009, Issue 92, p83 

    The article deals with the characteristics of the linear induction machines (LIM) with two flat inductors operating at the mode of a linear phase regulator (LPR). The mode is executed when shifting one inductor respect to the other within the boundaries of the double pole pitch. There are...

  • Create An Inverting Power Supply Using A Step-Down Regulator. Gupta, Sureena // Power Electronics Technology;Jun2011, Vol. 37 Issue 6, p29 

    The article focuses on the utilization of a step-down converter in inverting power supplies for industrial applications. It states that inverting power supplies using step-down regulators create a negative output voltage. It mentions that a negative output voltage in required in various...

  • Dynamic Voltage Restorer (DYR) With Line Energy Supplied Based on Hysteresis Voltage Control for Deep Voltage Sag and Swell. Al Jowder, Fawzi // International Review on Modelling & Simulations;Dec2009, Vol. 2 Issue 6, p616 

    This paper proposes a configuration for the Dynamic Voltage Restorer (DVR) to compensate deep and long duration voltage sags and swells. The proposed configuration is a rectifier fed inverter, through DC-to-DC boost converter. With this configuration, there is no need for energy storage elements...

  • Low-dropout linear regulators deliver constant currents. Ing, Budge // EDN;5/11/2006, Vol. 51 Issue 10, p80 

    This article explains that linear voltage regulators provide a simple way to produce a constant current by connecting a fixed resistor between the regulator's output and ground nodes. The constant output voltage of regulator produces a constant current through the resistor. The basic circuit can...

  • LDOs See Little Drop-Off in Interest. Morrison, David // Power Electronics Technology;May2005, Vol. 31 Issue 5, p8 

    Shares the author's thoughts about the low-dropout linear regulator (LDO) for power-supply applications. Aspects of LDO design; Popularity of monolithic LDO; Efficiency of LDO; Growth in sales of LDO.

  • Stepdown DC-DC Converter.  // Power Electronics Technology;Feb2006, Vol. 32 Issue 2, p60 

    The article features Linear Technology's LTC3410 high efficiency, 2.25-MHz synchronous-buck regulator that is capable of delivering up to 300 mA of continuous output current from an SC70 package. The LTC3410 uses a constant frequency and current-mode architecture and operates from an input...

  • Constant-on-time buck-boost regulator converts a positive input to a negative output. Bell, Robert // EDN;12/7/2004, Vol. 49 Issue 25, p104 

    This article discusses how to reconfigure a buck regulator into a buck-boost circuit to convert a positive voltage into a negative voltage. The basic component configurations of both circuits are similar, and the inductor and the rectifier diode are transposed. Because the main switch remains in...

  • Voltage Regulation and Harmonic Compensation in Stand-Alone Inverter-Based Distributed Generation Using Non-Sinusoidal Unipolar Hysteresis Voltage Control. Khodsuz, Masume; Sheikholeslami, Abdolreza // International Review of Electrical Engineering;Sep/Oct2009 Part A, Vol. 4 Issue 5, p792 

    During the islanding mode, whenever the power grid is not available, distributed-generation (DG) produces sinusoidal output voltage and supplies nonlinear loads, thus voltage at the point of common coupling (PCC) becomes non-sinusoidal. The situation gets particularly aggravated during the...

  • Tiny Circuit Saves Big On Relay Power. Campbell, James Stewart // Electronic Design;3/16/2006, Vol. 54 Issue 6, p80 

    The article discusses the integration of a simple and small digital circuit to reduce power consumption and to energize a relay coil at full power for the time required for reliable latch. An SN74LVC1G97 Schmitt-input multifunction gate, which was configured as a dual-gated oscillator, has been...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics