TITLE

Circuit Board Design for Good Electromagnetic Compatibility Performance

AUTHOR(S)
Bearpark, J.
PUB. DATE
October 2005
SOURCE
Medical Device Technology;Oc2005, Vol. 16 Issue 8, p26
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
This article discusses factors that influence electromagnetic compatibility (EMC) performance of printed circuit boards. It also outlines techniques to avoid the use of overly expensive screen enclosures in order to comply with the standards. The techniques outlined will decrease the level of conducted and radiated radio frequency (RF) emissions and improve the rejection of, or immunity to, radiated and conducted RF energy. A circuit needs to be considered while designing for EMC with regard to the likelihood of producing RF emissions.
ACCESSION #
19724937

 

Related Articles

  • Damage from a Lightning Bolt or a Spark--It Depends on How Tall. Laumeister, Bill // Power Electronics Technology;Jul2012, Vol. 38 Issue 7, p28 

    The article discusses about ways to protect printed circuit boards (PCBs) against electrostatic discharge (ESD) destruction. It focuses on analog parts with bigger geometries are the best to use to protect a field-programmable gate array (FPGA) with its small geometry. It is stated that it is...

  • DESIGNING with MicroBGAs. SAFDAR, ISHTIAQ // Printed Circuit Design & Manufacture;Apr2009, Vol. 26 Issue 4, p34 

    The article examines the pros and cons of the use of micro-ball grid array (microBGA) in designing printed circuit board (PCB). The challenge posed by microBGA to PCB design is noted. It is stated that a traditional dog-bone fanout pattern for a microBGA is appropriate due to its narrow pitch....

  • Riddle Me This, CAD Man. Bogatin, Eric // Printed Circuit Design & Manufacture;Oct2004, Vol. 21 Issue 10, p48 

    Discusses the behavior of a printed circuit board transmission line. Properties of a transmission line; Relationship between the length and time delay of a transmission line; Rule of thumb regarding the length of a transmission line.

  • HYDROMETALLURGICAL RECOVERY OF TIN AND LEAD FROM WASTE PRINTED CIRCUIT BOARDS (WPCBs): LIMITATIONS AND OPPORTUNITIES. RANITOVIć, M.; KAMBEROVIĆ, Ž.; KORAĆ, M.; JOVANOVIĆ, N.; MIHJALOVIĆ, A. // Metalurgija;2016, Vol. 55 Issue 2, p153 

    In this paper, possibility for selective Pb and Sn recovery, using three different solutions of NaOH, HCl and HNO3, from WPCBs containing low concentrations of Pb and Sn is presented. According to obtained results, over 98 % of Pb can be leached using 2 M HNO3 solution at 80 °C and over 90 %...

  • April Book-to-Bill Dips.  // SMT: Surface Mount Technology;Jul2006, Vol. 20 Issue 7, p12 

    The article reports on the IPC IMS/PCB book-to-bill ratio for April 2006. It mentions that the IPC IMS/PCB book-to-bill ratio was positive but decreased to 1.07 while the IPC reports a book-to-bill for rigid PCBs of 1.08 and the North American flexible book-to-bill ratio continued its plunge to...

  • New August Book-to-Bill Ratio Falls Slightly.  // SMT: Surface Mount Technology;Nov2004, Vol. 18 Issue 11, p22 

    This article reports that the IPC IMS/printed circuits boards (PCB) book-to-bill ratio for August 2004 fell from July to 1.04 in August 2004. Electronics company IPC now is reporting separate statistics for the rigid PCB and flexible circuit segments of the industry, with a book-to-bill of 1.05...

  • Routing BGA Fanout Patterns by PCB region. Pfeil, Charles // Printed Circuit Design & Manufacture;Jul2008, Vol. 25 Issue 7, p48 

    The article presents a concept in applying different types of fanout patterns for ball grid array (BGA) by specific printed circuit board (PCB) region. It offers figures showing the overall view of the VGA and the regions. It is noted that the regions are used to get the most effective fanout...

  • Eliminating BOARD DEFECTS. Khan, Zulki // Printed Circuit Design & Manufacture;May2008, Vol. 25 Issue 5, p40 

    The article focuses on the need for process-related issues to be specified in the assembly drawing to eliminate board defects. Defects of printed circuit board (PCB) may cause deteriorated radio-frequency (RF) signals resulting from inappropriate shielding, incorrectly structured boards due to...

  • Routing DIFFERENTIAL Pairs. Nagle, Dennis // Printed Circuit Design & Manufacture;Aug2003, Vol. 20 Issue 8, p28 

    Presents information on routing differential pairs of printed circuit boards. Benefits of equal and opposite signals sent down tightly coupled traces; Illustration of constraining differential signals; Basic design rules.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics