Getting up to speed on epoxies

July 1999
Old House Journal;Jul/Aug99, Vol. 27 Issue 4, p28
Discusses the properties and proper usage of epoxies. Components and stages of epoxies; Factors which determine epoxy curing time; Methods in handling its exothermic property.


Related Articles

  • Instrumentation for wide frequency range measurements of epoxy resin during microwave curing. Meyer, O.; Chevalier, S.; Belhadj-Tahar, N.; Fourrier, M.; Fourrier-Lamer, A. // Review of Scientific Instruments;Apr2000, Vol. 71 Issue 4 

    A new instrumentation system for measuring wide frequency band complex permittivity (1 MHz-2 GHz) during the microwave curing process has been developed using an original system coupled with coaxial discontinuity. The instrumentation operates through the automatic commutation of the wide...

  • Silver Conductive, One Component Epoxy Cures at 80°C.  // Advancing Microelectronics;Mar/Apr2019, Vol. 46 Issue 2, p20 

    No abstract available.

  • Investigation of the curing of thermoset systems by mid and near infrared spectroscopy and two-dimensional correlation. Lachenal, G.; Buchet, R.; Ren, Y.; Ozaki, Y. // AIP Conference Proceedings;2000, Vol. 503 Issue 1, p223 

    Studies of isothermal curing reactions of an epoxy resin using mid-and near-IR as well as preliminary results based on 2D correlation analysis will be presented and discussed. This preliminary investigations show that 2D Correlation spectroscopy is a powerful technique for the monitoring curing...

  • Investigation of the Curing Kinetics and Rheological Behavior of Multifunctional Epoxy Resin System. Zhou Zhengwei; Bai Ruicheng; Ren Musu; Sun Jinliang; Zhou Ze; Hu Qingping; Wang Chuanbin // Polymers & Polymer Composites;2011, Vol. 19 Issue 4/5, p345 

    The curing reactivity and viscosity of AG-70 epoxy resin system with MNA as the curing agent and 2,4-EMI as the accelerator promoter were measured by using non-isothermal differential scanning calorimetry (DSC) and RS600 Rotational Rheometer, respectively. According to the DSC curves at...

  • Hardener type as critical parameter for the electrical properties of epoxy resin/polyaniline blends. Tsotra, P.; Gatos, K. G.; Gryshchuk, O.; Friedrich, K. // Journal of Materials Science;Feb2005, Vol. 40 Issue 3, p569 

    Epoxy resin/polyaniline-salt (EP/PANI-DBSA) blends were prepared and cured with different types of hardeners. The effect of hardener type on the volume resistivity of the blends was investigated. It was found out that acidic curing agents support the conductive character of polyaniline, while...

  • Study of cure kinetics of DGEBA with optically active curing agents. Ghaemy, Mousa; Behmadi, Hossein // Journal of Thermal Analysis & Calorimetry;Sep2010, Vol. 101 Issue 3, p1011 

    3-Deoxy-D- erythro-hexos-2-ulose bis (thiosemicarbazone) ( I) readily obtained from d-glucose reacts with copper acetate hydrate to give the corresponding chelate ( II). The complex ( II) was acetylated to give the corresponding tri- O-acetyl derivative ( III). The ( I), ( II), and ( III) were...

  • Cure kinetics of epoxy resin and thermoplastic polymer. Sánchez-Cabezudo, Marta; Prolongo, Margarita; Salom, Catalina; Masegosa, Rosa // Journal of Thermal Analysis & Calorimetry;Dec2006, Vol. 86 Issue 3, p699 

    The cure kinetics and morphology of diglycidyl ether of bisphenol A (DGEBA) modified with polyvinyl acetate (PVAc) using diaminodiphenylmethane (DDM) as hardener were investigated through differential scanning calorimetry (DSC) and environmental scanning electron microscopy (ESEM). Isothermal...

  • Curing kinetics and thermal stability of diglycidyl ether of bisphenol. Sharma, P.; Choudhary, V.; Narula, A. K. // Journal of Thermal Analysis & Calorimetry;Jan2008, Vol. 91 Issue 1, p231 

    Curing kinetics of diglycidyl ether of bisphenol-A (DGEBA) in the presence of varying molar ratios of aromatic imide-amines and 4,4′-diaminodiphenylsulfone (DDS) were investigated by the dynamic differential scanning calorimetry. The imide-amines were prepared by reacting 1 mole of...

  • Study on Viscosity Evaluation of Foamed Epoxy Asphalt. HUANG Ming; WEN Xuejun; XU Jian; ZHENG Xiaoguang; HUANG Weidong // Advanced Materials Research;11/14/2014, Vol. 1082, p424 

    Foamed epoxy asphalt, which is a kind of epoxy asphalt with a brand-new curing system, has excellent construction performance. Based on the change of viscosity-temperature curves, several mixing amounts of new anhydride curing agents used in B-component of epoxy asphalt have been proposed....


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics