TITLE

Powderful allies

AUTHOR(S)
Nathan, Stuart
PUB. DATE
October 2005
SOURCE
Engineer (00137758);10/31/2005, Vol. 293 Issue 7687, p31
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
No abstract available.
ACCESSION #
18802320

 

Related Articles

  • Preparation of Titanium Alloy Rods by Powder Compact Extrusion. Fei YANG; GABBITAS, Brian; MUKHTAR, Aamir; DOWNING, Warwick // Advanced Materials Research;2014, Issue 1019, p241 

    Titanium alloys have a number of features which make them attractive for use in aerospace, marine and chemical engineering, biological engineering, etc., due to their advantage of low density, high strength, and excellent corrosion resistance and biocompatibility. In this paper, Ti-6Al-4V...

  • Achieving accuracy with conveying. Hosch, Michael A.; Kuhnz, John // Motion System Design Exclusive Insight;7/ 9/2012, p2 

    The article discusses high-precision applications that require conveyors to eliminate modes of lost motion. A brief history on the origin of modern conveying is presented. Conveyor designs went from steel to aluminum because aluminum conveyors with extruded-style frames allow for modularity and...

  • Belt conveyors now at the right length.  // Manufacturers' Monthly;Oct2005, p68 

    The article reports on Robotunits' offer of the maximum choices when requesting the exact belt conveyor length necessary for the operation. The process has been made easier by an online belt conveyor configuration system. Belt conveyors are constructed using a standard aluminum extrusion system....

  • Influence of texture on the mechanical properties of commercially pure magnesium prepared by powder metallurgy. Pérez, P.; Garcés, G.; Adeva, P. // Journal of Materials Science;Jun2007, Vol. 42 Issue 11, p3969 

    In the present work the influence of texture on the mechanical properties up to 500 °C of commercially pure magnesium prepared by PM was determined. Extrusion of magnesium powders was carried out between 250 and 450 °C. All extruded materials exhibited an intense fibre texture with the...

  • Production of Nitinol Wire from Elemental Nickel and Titanium Powders Through Spark Plasma Sintering and Extrusion. Butler, J.; Tiernan, P.; Gandhi, A.; McNamara, K.; Tofail, S. // Journal of Materials Engineering & Performance;Jun2011, Vol. 20 Issue 4/5, p757 

    This study demonstrates the production of highly dense binary NiTi by spark plasma sintering (SPS) of elemental Ni and Ti powders. The sintered billets were extruded to 0.7 mm wire for tensile testing. Excellent mechanical properties and very dense microstructures were obtained in the wires...

  • Hydrodynamic characteristics of a screw-extruder/granulator and rheologic properties of free-flowing sodium tripolyphosphate during extrusion granulation. Laktionov, A.; Panov, A. // Chemical & Petroleum Engineering;Sep/Oct2004, Vol. 40 Issue 9/10, p509 

    Reports on the development of a screw-extruder/granulator for free-flowing materials in the chemicals and petroleum engineering. Components of the design; Fixed position of the injector on housing of the apparatus about the axis of the charge opening; Shaping of the convex surface of the die of...

  • Celcon demand drives Ticona expansion. Esposito, Frank // Plastics News;5/17/2004, Vol. 16 Issue 11, p17 

    Strong demand for its Celcon-brand acetal is leading engineering resins maker Ticona Inc. to boost capacity in Bishop, Texas, by 35 million pounds by the end of 2004. Summit, New Jersey-based Ticona, which already ranks as the world's largest acetal maker, is seeing "ongoing demand" for Celcon...

  • AUTOMATED PM PART HANDLING AND INTEGRATION OF INDUSTRIAL VISION. Morris, James R.; Lucey, Michael L. // International Journal of Powder Metallurgy;Sep/Oct2006, Vol. 42 Issue 5, p43 

    Recent advances in the use of automation to handle green and sintered powder metal (PM) components are examined. The flow of PM parts from compaction through inspection is followed and several material handling concepts are detailed and compared for the various processes. The use of industrial...

  • Microstructure and Mechanical Properties of Extruded Magnesium-Aluminum-Cerium Alloy Tubes. Luo, Alan A.; Wenyun Wu; Mishra, Raj K.; Li Jin; Sachdev, Anil K.; Wenjiang Ding // Metallurgical & Materials Transactions. Part A;Oct2010, Vol. 41 Issue 10, p2662 

    Current commercial magnesium extrusion alloys do not offer desirable combinations of strength, ductility, and extrusion speed for automotive structural applications. The effect of small additions of cerium (Ce) to pure magnesium (Mg) and Mg-3 pct Al alloy extruded tubes has been studied. The...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics