TITLE

Cooling Data Centers With Raised-Floor Plenums

AUTHOR(S)
Beaty, Don
PUB. DATE
September 2005
SOURCE
Heating/Piping/Air Conditioning Engineering;Sep2005, Vol. 77 Issue 9, p58
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
Discusses issues involved in using raised-floor plenums in data centers for cooling high-density loads. Impact of electronic packaging on cooling-system requirements and performance; Provisions needed for electronic packaging and load variation; Influences of a supply-air path on air delivery or distribution; Factors that influences distributed air and bypass air.
ACCESSION #
18509064

 

Related Articles

  • Watered Down Data.  // Baseline;Nov2009, Issue 100, p37 

    The article focuses on a paper on DatacenterKnowledge.com which discusses the plan of Mauritius to become an international data canter hub. It notes that the potential of ocean to help data center operators decrease their cooling costs is one of the major aspects of the plan. It notes that the...

  • CHAPTER 18: NONRESIDENTIAL COOLING AND HEATING LOAD CALCULATIONS.  // ASHRAE Handbook: Fundamentals;2009, p18-1 

    Chapter 18 of the book "2009 ASHRAE Handbook: Fundamentals" is presented. The chapter focuses on common elements of cooling load calculations including internal heat gain, ventilation and infiltration, moisture migration, and fenestration heat gain. It also presents two methods of heating and...

  • Impacts of Ventilation Ratio and Vent Balance on Cooling Load and Air Flow of Naturally Ventilated Attics. Shimin Wang; Zhigang Shen // Energies (19961073);Sep2012, Vol. 5 Issue 9, p3218 

    The impacts of ventilation ratio and vent balance on cooling load and air flow of naturally ventilated attics are studied in this paper using an unsteady computational fluid dynamics (CFD) model. Buoyancy-driven turbulent ventilations in attics of gable-roof residential buildings are simulated...

  • Cooling Health-Care Technology. Beaty, Don // Heating/Piping/Air Conditioning Engineering;Jul2009, Vol. 81 Issue 7, p22 

    The article focuses on the cooling of information-technology (IT) systems in health-care facilities. It explores the differences between IT and procedure rooms, which have been considered as the major categories of technology in health-care facilities. It also provides suggestions on how to...

  • Comparison between Underfloor Supply and Overhead Supply Ventilation Designs for Data Center High-Density Clusters. Schmidt, Roger R.; Iyengar, Madhusudan // ASHRAE Transactions;2007, Vol. 113 Issue 1, p115 

    Data center facilities that house computer equipment represent a high capital investment and are typically designed to function for at least a few years, often without any down time. The computer equipment is usually designed with the assumption of rack air inlet temperatures in the 20-30° C...

  • DESIGN REVIEW AND EQUIPMENT STARTUP CHECKLIST FOR CHILLER REPLACEMENT/RETROFIT. McKew, Amanda // Engineered Systems;Apr2006, Vol. 23 Issue 4, p34 

    The article proposes a checklist for replacing or retrofitting chillers. The list includes replacement phasing considerations, electrical installation requirements. It also includes the requirements for HVAC inspection and requirements for plumbing, general contractor and conditions.

  • We're on Deadline--Printing Press Heat Gain Is More (or Less) than Just Motor Load. Wessel, Dennis J. // ASHRAE Transactions;2004, Vol. 110 Issue 2, p871 

    Historically, heat gain from a newspaper printing press has been a conversion of input power to heat. This method of calculation has resulted in the installation of grossly oversized cooling equipment. Recently developed information from press vendors has resulted in the determination of...

  • Energy Performance of External versus Internal Shading Devices in Residential Buildings. Yunyang Ye; Peng Xu; Jiachen Mao // Applied Mechanics & Materials;2014, Issue 667-679, p546 

    In the traditional concept, the performance of internal shading system is inferior compared with that of external one. In actual projects, however, external shadings are subject to severe limitations due to the damage of artistic appearance in building design, the high initial investment and the...

  • Cool.  // New Yorker;8/30/1958, Vol. 34 Issue 28, p20 

    The article focuses on the availability of conditioning units in automobiles around the U.S. Most industries like movie houses and restaurants are acquiring airconditioning units. Just recently, the automobiles are following the trend. Airconditioning automobiles have been enjoying a boom right...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics