August 2005
Metal Center News;Aug2005, Vol. 45 Issue 9, p46
Trade Publication
Reports that Dofasco Inc. has successfully started up its blast furnace which was completely rebuilt over the last year in the U.S. Purpose of the rebuilding of its blast furnace to incorporate the most advanced iron-making technology; Features of the rebuilt blast furnaces; Impact of the strategy on allowing iron production to continue uninterrupted while the furnace was under construction.


Related Articles

  • Modern Processes for the Coke-Less Production of Iron. Usachev, A. B.; Romenets, V. A.; Lekherzak, V. E.; Balasanov, A. V. // Metallurgist;Mar2002, Vol. 46 Issue 3/4, p117 

    This article focuses on various modern technological processes for the coke-less production of iron. During the 1960s, 1970s, and 1980s, some progress was made in the development of coke-less processes that involved the solid-phase reduction of iron ores to obtain primary iron. However, these...

  • Bell-less rotary charging unit – A perfect burden loading technology. Boranbaev, B.; Glazer, Y.; Vakulin, V.; Sirkar, A. // Metallurgist;Jul2009, Vol. 53 Issue 7-8, p395 

    A performance record is given of blast furnaces at JSPL (BF-2) steel plant (Jindal, India) that were equipped for the first time in the world with bell-less charging apparatuses with the rotary burden distributors (BRCU). The peculiarity of the rotary principle of stock distribution in the...

  • Efficiency of using different types of charging apparatuses on blast furnaces. Kurunov, I. F. // Metallurgist;Nov2009, Vol. 53 Issue 11/12, p661 

    A comparison is made between the performance indices of blast furnaces with different types of charging apparatuses. It is shown that an apparatus with a rotary charge distributor has several advantages over chute-type apparatuses, including being simpler to install and operate, being more...

  • Optimizing the tapping regime on a blast furnace operating at variable speed. Fedorov, I.; Bugaev, S. // Metallurgist;Sep2006, Vol. 50 Issue 9/10, p519 

    The main factors that determine the uniformity with which smelting products are tapped from a blast furnace are the rate of accumulation of the products in the hearth and the tapping rate. The first parameter is in turn determined by the stability of the furnace’s operation and can vary...

  • Aspects of the control of charge distribution in a blast furnace with additional regulators. Bugaev, S.; Nikitin, L.; Portnov, L.; Kolyaka, V.; Dolinskii, V. // Metallurgist;Nov2004, Vol. 48 Issue 11/12, p544 

    The development and introduction of a charging apparatus with a rotary distributor required additional study of the distribution of the charge materials in the top of the furnace and optimization of the charging regimes to ensure efficient, high-productivity operation of the blast furnace....

  • Methods of extending a blast-furnace campaign. Kurunov, I. F.; Loginov, V. N.; Tikhonov, D. N. // Metallurgist;Nov2006, Vol. 50 Issue 11/12, p605 

    As before, the main trends in blast-furnace smelting in the Twenty-First Century are decreasing coke consumption, increasing furnace productivity, and lengthening of the furnace campaign. In the last few decades, the focus has increasingly been on extending the campaign through various...

  • Removing a blast furnace from service. Russkikh, V.; Alengos, M.; Levchenko, V.; Vas’kevich, M.; Vityaz’, A.; Chernyshov, S. // Metallurgist;Jan2009, Vol. 53 Issue 1/2, p65 

    This article examines methods that can be used to blow out blast furnaces for class-I overhauls or permanent shutdown. An analysis is made of the probability of explosion of gases in the furnace when different blow-out methods are used. A method which involves filling the working space of the...

  • Methods of Intensifying Blast-Furnace Operation. Sperkach, I. E.; Kurunov, I. F. // Metallurgist;Jan2005, Vol. 49 Issue 1/2, p44 

    Discusses the technology and methodology used for working blast furnaces. Approached used to increase pressure in blast furnaces; Effect of increasing gas pressure on blast-furnace productivity; Use of a gas-oxygen mixture in blast furnaces.

  • STUDY OF SCAFFOLD FORMATION MECHANISM IN BLAST FURNACE STACK. Mašlejová, Alica; Fröhlichová, Mária // Proceedings of the International Multidisciplinary Scientific Ge;2014, Vol. 3, p949 

    The scaffold is a build-up on blast furnace refractory (BF) lining, which is generated in temperature zones from 800 to 1100°C without presence of liquid phase. Such zones are middle and upper part of blast furnace stack. The scaffolds consist of dust portions of particular charge components...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics