TITLE

Crossover from capacitive to pseudoinductive charge-relaxation in organic/polymeric light-emitting diodes

AUTHOR(S)
Castro, F. A.; Bueno, P. R.; Graeff, C. F. O.; Nüesch, F.; Zuppiroli, L.; Santos, L. F.; Faria, R. M.
PUB. DATE
July 2005
SOURCE
Applied Physics Letters;7/4/2005, Vol. 87 Issue 1, p013505
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In this work we propose a phenomenological microscopic approach to deal with pseudoinductive charge-relaxation processes (named also as negative capacitance phenomena) in organic molecules (tris-8-hydroxyquinoline-aluminum) and polymeric [poly(2-metoxy-5-(2′-etil-hexiloxy)-1,4-phenylene vinylene)] light-emitting diodes (OLEDs and PLEDs, respectively). The approach is based mainly on the fact that the recombination rate is higher than the slower carrier transit time to reach the recombination zone. The approach is supported by the fact that in both PLEDs and OLEDs, the strong pseudoinductive relaxation process was mainly observed when electron-hole recombination takes place, suggesting this is a recombination dependent phenomenon. Besides, the negative branch, in the real part of the complex capacitance representation as a function of the frequency, was not observed in PLED homopolar devices.
ACCESSION #
18008391

 

Related Articles

  • Bipolar carrier transport in a conjugated polymer by complex admittance spectroscopy. Poplavskyy, Dmitry; So, Franky // Journal of Applied Physics;2/1/2006, Vol. 99 Issue 3, p033707 

    We report the bipolar transport properties of the LUMATIONâ„¢ (Sumitomo Chemical) 1300 Series green-emitting polymer investigated by means of admittance spectroscopy. Analysis of the inductive response in single-carrier polymer diodes yields electron and hole mobilities which are in...

  • White light from polymer light-emitting diodes: Utilization of fluorenone defects and exciplex. Sun, Q. J.; Fan, B. H.; Tan, Z. A.; Yang, C. H.; Li, Y. F.; Yang, Y. // Applied Physics Letters;4/17/2006, Vol. 88 Issue 16, p163510 

    A white light polymer light-emitting diode was demonstrated with a double layer configuration: poly[N,N′-bis(4-butylphenyl)-N,N′-bis(phenyl)benzidine] (poly-TPD) blended with poly(N-vinylcarbazole) as both hole-transporting layer and electron-blocking layer, blue-emissive...

  • Three-dimensional particle-in-cell simulations of applied-B ion diodes. Pointon, T.D.; Desjarlais, M.P.; Seidel, D.B.; Slutz, S.A.; Coats, R.S.; Kiefer, M.L. // Physics of Plasmas;Feb94, Vol. 1 Issue 2, p429 

    Discusses the use of the three-dimensional particle-in-cell code QUICKSILVER to study applied-B ion diodes. Impedance behavior of diodes in the simulations; Existence of electromagnetic instabilities which induce divergence in the ion beam; Association of transition with the buildup of electron...

  • Efficient single-component light-emitting electrochemical cells with an ion-conducting water-soluble polyfluorene. Doojin Vak; Seung-Hwan Oh; Dong-Yu Kim // Applied Physics Letters;6/15/2009, Vol. 94 Issue 24, p243305 

    Polymer light-emitting diodes (PLEDs) and light-emitting electrochemical cells (LECs) were fabricated using a water-soluble conjugated polymer with ion-conducting side chains. The water-soluble polymer was spin-coated on the emitting layer of a PLED and was used as an electron-injecting layer....

  • From many monomers to many polymers: Soft ellipsoid model for polymer melts and mixtures. Murat, Michael; Kremer, Kurt // Journal of Chemical Physics;3/8/1998, Vol. 108 Issue 10, p4340 

    Examines the soft ellipsoid model to represent polymer chains as soft particles. Importance of the model for the study of homopolymer melts; Relevance of the model for the phase separation of polymers; Use of the ellipsoidal model in combination with regular coarse grained models.

  • Solution-processed conjugated polymer organic p-i-n light-emitting diodes with high built-in potential by solution- and solid-state doping. Sivaramakrishnan, Sankaran; Mi Zhou; Kumar, Aravind C.; Zhi-Li Chen; Rui-Qi Png; Lay-Lay Chua; Ho, Peter K. H. // Applied Physics Letters;11/23/2009, Vol. 95 Issue 21, p213303 

    Polymer p-i-n homojunction light-emitting diodes (LEDs) comprising p-doped poly(dioctylfluorene-alt-benzothiadiazole) (F8BT) hole-injection, intrinsic F8BT emitter, and n-doped F8BT electron-injection layers have been demonstrated. A thin F8BT film was photocrosslinked and bulk p-doped by...

  • High-efficiency light-emitting diodes using neutral surfactants and aluminum cathode. Yu-Hua Niu; Hong Ma; Qingmin Xu; Alex K.-Y. Jen // Applied Physics Letters;2/21/2005, Vol. 86 Issue 8, p083504 

    High-efficiency polymer light-emitting diodes were fabricated by spin-coating a layer of neutral surfactant on top of the poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene] electroluminescent (EL) layer to facilitate the electron injection through the high-work-function aluminum...

  • Improved performance of polymer light-emitting diodes with nanocomposites. Hussain, A. Mohammed; Neppolian, B.; Kim, Sun Hee; Kim, Jin Young; Choi, Hee-Chul; Lee, Kwanghee; Park, Seong-Ju; Heeger, Alan J. // Applied Physics Letters;2/16/2009, Vol. 94 Issue 7, pN.PAG 

    The characteristics of a hybrid polymer light-emitting diode (HPLED) with an active layer of poly [2-methoxy,5-(2-ethylhexoxy)-1,4-phenylenevinylene] blended with Au-capped TiO2 nanocomposites are reported. Both the increased current in the active layer and low turn-on voltage were attributed to...

  • Color control of multilayer stacked white polymer light-emitting diodes using a quantum dot as an interlayer. Soon Ok Jeon; Chul Woong Joo; Kyungsoo Yook; Jun Yeob Lee // Applied Physics Letters;3/2/2009, Vol. 94 Issue 9, pN.PAG 

    Color tunable multilayer stacked white polymer light-emitting diodes (WPLEDs) have been developed using a quantum dot as an interlayer. Multilayer WPLEDs were fabricated by a stamp transfer printing method and the charge transport of WPLEDs could be controlled by the quantum dot interlayer. The...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics