TITLE

AMPCO TO CAST BIGGER BILLETS

PUB. DATE
June 2005
SOURCE
Metal Center News;Jun2005, Vol. 45 Issue 7, p85
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
The article reports that Ampco Metal Inc. is installing a new vertical billet caster in its Arlington Heights, Illinois, facility. The new caster replaces a horizontal casting line, and will give Ampco the capability to handle larger melts and cast larger diameter billets. Ampco is an international marketer of copper-based alloys. Now owned by Ampco Metal SA based in Switzerland, the company is working hard to recast itself as a leaner, more customer-focused supplier of custom engineered aluminum bronzes.
ACCESSION #
17361804

 

Related Articles

  • Say good-bye to beryllium in mold making. Ogando, Joseph // Design News;12/17/2001, Vol. 57 Issue 24, p19 

    Introduces the MoldMATE 90, a copper alloy material developed by Ampco Metal Inc. Features of the material; Comparison between MoldMATE and other mold materials.

  • Procurable ALLOYS. SALOIS, GRETCHEN // Modern Metals;Nov2011, Vol. 67 Issue 10, p42 

    The article features Arlington Heights, Illinois-based specialty copper alloys producer and distributor AMPCO Metal Inc. and its products. The replacement of beryllium copper material with AMPCOLOY 944 has led to significant improvement in reliability of AMPCO 25 copper alloy. Among the...

  • The effect of varying chill surface roughness on interfacial heat transfer during casting solidification. Griffiths, William David; Kayikci, Ramazan // Journal of Materials Science;Jun2007, Vol. 42 Issue 11, p4036 

    Experiments to investigate interfacial heat transfer mechanisms during casting solidification were carried out by varying the surface roughness of a Cu chill used to bring about unidirectional solidification of an Al-4.5 wt.% Cu alloy. Little variation in interfacial heat transfer coefficient...

  • Tool Steel and Aluminum Staying Strong. Baranek, Sherry L. // Moldmaking Technology Magazine;May2012, Vol. 15 Issue 5, p34 

    The article presents a roundtable of mold material makers and suppliers that discussed how new offerings lead to easier machinability, better weldability, increased strength and improved surface hardness. Miller of Bohler-Uddeholm sees a shift toward stainless alloys with improved corrosion...

  • Developing and Studying Methods and Equipment for Rolling Collector Profiles Made of Alloy BrKd1. Samodurova, M.; Kremsov, N.; Barkov, L.; Latfulina, Yu. // Metallurgist;Nov2015, Vol. 59 Issue 7/8, p613 

    The Russian and foreign technology used since the beginning of the last century to industrially produce collector profiles made of copper-cadmium bronze is characterized by low productivity, large losses of metal, and semifinished and finished products of inferior quality. The technology...

  • Numerical Simulation of Horizontal Continuous Casting Process of C194 Copper Alloy. Guojie Huang; Shuisheng Xie; Lei Cheng; Zhenkang Cheng // AIP Conference Proceedings;2007, Vol. 908 Issue 1, p1073 

    Horizontal Continuous Casting (H.C.C) is an important method to cast C194 copper ingot. In this paper, numerical simulation is adopted to investigate the casting process in order to optimize the H.C.C technical parameters, such as the casting temperature, casting speed and cooling intensity....

  • CASTING ANSWERS & ADVICE.  // Modern Casting;Oct2003, Vol. 93 Issue 10, p42 

    Provides answers to questions about metal-casting. Factors to consider in determining the optimum binder formulation for a foundry green sand system; Use of existing gating and casting methods to cast lead-free copper alloys.

  • Analysis of the Production of Ribbons of Copper-Phosphorus Solder by the Lateral Flow of a Melt onto a Rotating Roller Mold. Tavolzhanskii, S.; Pashkov, I.; Aleksanyan, G. // Metallurgist;Jan2016, Vol. 59 Issue 9/10, p843 

    Copper-phosphorus solders in the form of ribbons with a phosphorus content of 5-8%, thickness of 0.2-1 mm, and width of 10-20 mm are widely used to secure windings and contacts in electrical machinery. Certain alloys which are based on the copper-phosphorus system and contain a nickel addition...

  • Alloy Alternative.  // Moldmaking Technology Magazine;Mar2010, Vol. 13 Issue 3, p41 

    The article evaluates the AMPCOLOY 944 copper-nickel-silicon chromium alloy from AMPCO Metal Inc.

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics