TITLE

Selective metallization of internal walls of hollow structures inside glass using femtosecond laser

AUTHOR(S)
Sugioka, Koji; Hongo, Tomohiro; Takai, Hiroshi; Midorikawa, Katsumi
PUB. DATE
April 2005
SOURCE
Applied Physics Letters;4/25/2005, Vol. 86 Issue 17, p171910
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The selective metallization of glass is demonstrated by femtosecond laser direct writing in an electroless plating solution. The multiphoton absorption of a femtosecond laser by transparent glass makes it possible to selectively deposit copper thin films on the internal walls of hollow microstructures fabricated inside the glass. We regard the mechanism of this process as the reducing reaction of metal ions in the electroless plating solution by the free electrons generated in the glass by the multiphoton absorption of the femtosecond laser.
ACCESSION #
17227584

 

Related Articles

  • Transient of scanning electron microscopic images for a buried microstructure in insulators. Zhang, Hai-Bo; Li, Dao-Yu; Li, Wei-Qin // Review of Scientific Instruments;Dec2007, Vol. 78 Issue 12, p126105 

    We clarify the transient process and its mechanism of scanning electron microscope (SEM) images of a trench microstructure buried in insulators. First, interface charges of primary electrons trapped on the trench are derived from the charging model of a capacitor considering the electron beam...

  • Characteristics of a velvet cathode under high repetition rate pulse operation. Tao Xun; Jian-De Zhang; Han-Wu Yang; Zi-Cheng Zhang; Yu-Wei Fan // Physics of Plasmas;Oct2009, Vol. 16 Issue 10, p103106 

    As commonly used material for cold cathodes, velvet works well in single shot and low repetition rate (rep-rate) high-power microwave (HPM) sources. In order to determine the feasibility of velvet cathodes under high rep-rate operation, a series of experiments are carried out on a high-power...

  • Influence of structural disorder on magnetic and transport properties of (La0.7Sr0.3)0.5(Pr0.65Ca0.35)0.5MnO3 films. Prokhorov, V. G.; Flis, V. S.; Kaminsky, G. G.; Lee, Y. P.; Park, J. S.; Svetchnikov, V. L. // Low Temperature Physics;Feb2005, Vol. 31 Issue 2, p161 

    Magnetic and transport properties of (La0.7Sr0.3)0.5(Pr0.65Ca0.35)0.5MnO3 films prepared by a “co-deposition” utilizing the laser-ablation technique are investigated in a wide temperature range. The film deposited at 300 °C has a nanocrystalline disordered structure and exhibits a...

  • Carbon nanotube growth for field-emission cathodes from graphite paste using Ar-ion bombardment. Hunt, Charles E.; Glembocki, Orest J.; Wang, Yu; Prokes, Sharka M. // Applied Physics Letters;4/18/2005, Vol. 86 Issue 16, p163112 

    Multiwall carbon nanotubes (MW-CNT) have been synthesized from solid-phase graphite. The graphite is deposited as a thick-film paste and irradiated with a 1.2 keV flood Ar-ion beam, transforming the graphite surface to a composite of MW-CNT embedded in the graphite matrix. Micro-Raman...

  • The response of soda-lime glass-hydroxyterminated polybutadiene composites to shock loading. Millett, J. C. F.; Bourne, N. K.; Akhavan, J.; Milne, A. M. // Journal of Applied Physics;2/15/2005, Vol. 97 Issue 4, p043524 

    The effect of particle size on the shock response of three soda-lime glass-hydroxyterminated polybutadiene composites has been investigated. While the shock velocity–particle velocity relationship has been shown to be nearly identical in all three materials, thus indicating that the...

  • Optical injection and detection of ballistic pure spin currents in Ge. Loren, Eric J.; Ruzicka, Brian A.; Werake, Lalani K.; Zhao, Hui; van Driel, Henry M.; Smirl, Arthur L. // Applied Physics Letters;8/31/2009, Vol. 95 Issue 9, p092107 

    Ballistic pure spin currents are injected into Ge at 295 K using quantum interference between one and two photon absorption processes for 1786 and 893 nm, 200 fs optical pulses. The spin currents are spatially and temporally detected using polarization- and phase-dependent differential...

  • Statolith shape and microstructure as indicators of ontogenetic shifts in the squid Gonatus fabricii (Oegopsida, Gonatidae) from the Norwegian Sea. Arkhipkin, Alexander I.; Bj�rke, Herman // Polar Biology;Jan2000, Vol. 23 Issue 1, p1 

    Statolith shape and microstructure were studied in 151 specimens of the common arctic squid Gonatus fabricii (7.3�322 mm pen length) collected in the southern Norwegian Sea. Statolith development and growth both comprised two main periods, which corresponded with the epipelagic and...

  • Physicochemical simulation of the combustion of materials with the total endothermal effect. V. Gusarov; V. Almjashev; V. Khabensky; S. Beshta; V. Granovsky // Glass Physics & Chemistry;Oct2007, Vol. 33 Issue 5, p492 

    Abstract  A new type of combustion, namely, the combustion of materials without heating of the environment, is described, and the conditions under which this process can occur are analyzed. It is demonstrated that the possibility of occurring the process under consideration depends...

  • Fabrication of polymer microstructures for MEMS: sacrificial layer micromolding and patterned substrate micromolding. Nicholas Ferrell; James Woodard; Derek Hansford // Biomedical Microdevices;Dec2007, Vol. 9 Issue 6, p815 

    Abstract  Two soft lithography based fabrication techniques are employed for fabricating mechanically independent, freely suspended polymer microstructure from poly(n-propyl methacrylate) (PPMA), poly(methyl methacrylate) (PMMA), and polystyrene. Both methods involve a...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics