TITLE

Improved upper critical field in bulk-form magnesium diboride by mechanical alloying with carbon

AUTHOR(S)
Senkowicz, B. J.; Giencke, J. E.; Patnaik, S.; Eom, C. B.; Hellstrom, E. E.; Larbalestier, D. C.
PUB. DATE
May 2005
SOURCE
Applied Physics Letters;5/16/2005, Vol. 86 Issue 20, p202502
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
High-energy milling of magnesium diboride (MgB2) prereacted powder renders the material largely amorphous through extreme mechanical deformation and is suitable for mechanically alloying MgB2 with dopants including carbon. Bulk samples of milled carbon and MgB2 powders subjected to hot isostatic pressing and Mg vapor annealing have achieved upper critical fields in excess of 32 T and critical current density approaching 106 A/cm2.
ACCESSION #
17164911

 

Related Articles

  • Variation of pinning mechanism and enhancement of critical current density in MgB2 bulk containing self-generated coherent MgB4 impurity. Cai, Qi; Liu, Yongchang; Ma, Zongqing; Li, Huijun; Yu, Liming // Applied Physics Letters;9/23/2013, Vol. 103 Issue 13, p132601 

    Bulk MgB2, with self-generated MgB4 pinning centers, have experienced two-step sintering process, initially at 750 °C and then 900-1000 °C. On the contrary to the widely accepted point that MgB4 deteriorates superconductivity, it was found that MgB4 played a significant role in enhancing...

  • The accelerated formation of MgB2 phase with high critical current density by Cu and SiC multidoping during the low-temperature sintering process. Ma, Zongqing; Liu, Yongchang; Yu, Liming; Zhao, Qian // Journal of Applied Physics;Dec2008, Vol. 104 Issue 11, p113917 

    Combined with the thermal analysis and phase identification, it is found that during the low-temperature sintering process of the SiC-doped MgB2 samples, the Cu addition can improve both the reaction between Mg and B and the reaction between Mg and SiC and thus accelerate the formation of the...

  • Effects of High Pressure Using Cold Isostatic Press on the Physical Properties of Nano-SiC-Doped MgB. Shahabuddin Shah, M.; Shahabuddin, Mohammad; Parakkandy, Jafar; Alzayed, Nasser; Madhar, Niyaz; Batoo, Khalid // Journal of Superconductivity & Novel Magnetism;Feb2015, Vol. 28 Issue 2, p481 

    In this paper, we are presenting the effects of pressure using cold isostatic press (CIP) on the physical properties of nano-SiC-doped bulk sample MgBC. Effects on lattice parameters, critical current density ( J), upper critical field ( B), irreversibility field ( B), grain connectivity,...

  • Solenoid and Racetrack Coils Wound from MgB2 Strand. Sumption, M. D.; Bhatia, M.; Buta, F.; Bohnenstiehl, S.; Tomsic, M.; Rindfleisch, M.; Yue, J.; Phillips, J.; Kawabata, S.; Collings, E. W. // AIP Conference Proceedings;2006, Vol. 824 Issue 1, p455 

    Results from measurements on five racetrack coils and one solenoid coil are reported in this work. Three of the racetracks were wound with monofilamentary strand, and two from multifilamentary 19-stack strands. The solenoid coil was wound from 7-stack multifilamentary strand. Some strands had Fe...

  • UNIVERSAL HARDNESS TEST TO CHARACTERIZE PM STEELS. Bocchini, Gian F.; Rivolta, Barbara; Gerosa, Riccardo // International Journal of Powder Metallurgy;May/Jun2008, Vol. 44 Issue 3, p77 

    Globalization enables powder metallurgy (PM) parts makers to choose powders from different sources. Raw materials of a specified composition produced by a given process should be equivalent. Differences in sintering behavior in industrial equipment have been investigated for PM steels obtained...

  • Multiwalled carbon nanotube/BaTiO3 nanocomposites: Electrical and rectification properties. Huang, Qing; Gao, Lian // Applied Physics Letters;3/21/2005, Vol. 86 Issue 12, p123104 

    Multiwalled carbon nanotube (MWNT)/BaTiO3 functional nanocomposites were fabricated via the spark plasma sintering technique. The resistivity of MWNT/BaTiO3 nanocomposites was found higher than that of MWNT-free BaTiO3 ceramics. In addition, the temperature dependence of resistivity showed...

  • Companies work on laser-sintered egg. whitel // MWP (Online Edition);10/ 4/2012, p114 

    The article reports that three companies have collaborated in the production of a highly intricate laser-sintered plastic egg.

  • Silverstone success for DMLS. whitel // MWP (Online Edition);10/ 4/2012, p175 

    The article reports that Laser-sintered titanium parts boost race car's performance in Formula Student championship.

  • Study of Densification Process and Microstructure for Highly Dense Doped MgB Bulk Samples. Yonamine, A.; Saeki, M.; Eiras, J.; Santos, D. // Journal of Superconductivity & Novel Magnetism;Oct2012, Vol. 25 Issue 7, p2157 

    In order to give a contribution in the subject of MgB processing technique to obtain low cost high density bulk samples with improved superconducting properties, studies on dilatometry and on the microstructures of in situ and ex situ MgB bulk samples prepared in the presence of carbon compounds...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics