TITLE

Lattice distortion/disordering and local amorphization in the dendrites of a Ti66.1Cu8Ni4.8Sn7.2Nb13.9 nanostructure–dendrite composite during intersection of shear bands

AUTHOR(S)
Kim, K. B.; Das, J.; Baier, F.; Eckert, J.
PUB. DATE
May 2005
SOURCE
Applied Physics Letters;5/16/2005, Vol. 86 Issue 20, p201909
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The dendrites in the Ti66.1Cu8Ni4.8Sn7.2Nb13.9 nanostructure–dendrite composite deformed up to 25% reveal an interaction of primary and secondary shear bands. A detailed analysis of the lattice images of the interaction regions in the dendrites using high resolution transmission electron microscopy indicates local amorphization and lattice distortion/disordering near to the apex of the primary shear bands in the dendrite. Furthermore, moiré fringes are formed at the edge of the interaction regions between the primary and secondary shear bands suggesting gradual structural changes in the dendrites.
ACCESSION #
17164894

 

Related Articles

  • Dynamics of Si Surface Morphology. Hibino, Hiroki // AIP Conference Proceedings;7/22/2010, Vol. 1270 Issue 1, p340 

    We review our studies on the dynamics of Si(111) surface morphology. In this work, low-energy electron microscopy, one of the best techniques for in situ observations of surface morphology changes and nanostructure formation, plays a crucial role. The size evolution of two-dimensional islands...

  • GLAD nanospirals.  // Physics Today;Jul2007, Vol. 60 Issue 7, p96 

    This article presents a photography and description of glancing angle deposition (GLAD). These are created when atoms are deposited on a substrate at a particular angle. The process makes silicon nanospirals, as seen through a scanning electron micrography. Researchers believe the process may be...

  • Monodisperse nanoparticles via metal induced crystallization. Chandra, A.; Clemens, B.M. // Journal of Applied Physics;12/1/2004, Vol. 96 Issue 11, p6776 

    This paper discusses the self-assembled formation of monodisperse gold-rich nanoparticles and associated crystalline silicon nanostructures. Multilayer films comprising of amorphous Au25Si75 and amorphous silicon were grown via dc magnetron sputtering and subsequently annealed under varying...

  • Nanostructure evolution in joining of Al and Fe nanoparticles with femtosecond laser irradiation. Z. Jiao; H. Huang; L. Liu; A. Hu; Duley, W.; He, P.; Y. Zhou // Journal of Applied Physics;2014, Vol. 115 Issue 13, p134305-1 

    The joining of Al-Fe nanoparticles (NPs) by femtosecond (fs) laser irradiation is reported in this paper. Fe and Al NPs were deposited on a carbon film in vacuum via fs laser ablation. Particles were then exposed to multiple fs laser pulses at fluences between 0.5 and 1.3 mJ/cm2. Transmission...

  • Optical properties of metal nanoparticles as probed by photoemission electron microscopy. Douillard, L.; Charra, F.; Fiorini, C.; Adam, P. M.; Bachelot, R.; Kostcheev, S.; Lerondel, G.; Lamy de la Chapelle, M.; Royer, P. // Journal of Applied Physics;4/15/2007, Vol. 101 Issue 8, p083518 

    Interaction of light with metallic nanostructures exhibit resonances specific to eigenmodes of collective electron motion known as plasmon modes. Both these resonances and effects of electromagnetic singularities lead to local field enhancement. Photoemission electron microscopy (PEEM) was...

  • Optical Characterization of Chemically Etched Nanoporous Silicon Embedded in Sol-Gel Matrix. Al Dwayyan, A. S.; Khan, M. Naziruddin; Al Salhi, M. S. // Journal of Nanomaterials;2012, p1 

    Nanoporous (NPs) silicon fabricated by chemical etching process in HF acid was first separated in tetrahydrofuran (THF) solvent and then incorporated into SiO2 matrix. The matrix was prepared by sol gel process in which dimethylformamide (DMF) was used as drying chemical control additive (DCCA)...

  • Consolidation of Amorphous Al80Fe10Ti5Ni5 Powders by Hot Pressing. Tavoosi, M.; Karimzadeh, F.; Enayati, M. H.; Kim, H. S. // Journal of Nanomaterials;2012, p1 

    The current study investigates the feasibility of fabricating amorphous Al80Fe10Ti5Ni5 powders by mechanical alloying and consolidating them into bulk samples by a hot-pressing technique. As-milled and hot-pressed samples were examined by Xray diffraction, scanning electron microscopy,...

  • Fabrication of Nano-Composite Surface Layers on Aluminium Employing Friction Stir Processing Technique. Bozorg, S. F. K.; Zarghani, A. S.; Zarei-Hanzaki, A. // AIP Conference Proceedings;Mar2010, Vol. 1217 Issue 1, p447 

    Al/Al2O3 nano-composite surface layer was fabricated via friction stir processing technique. Commercial AA6082 aluminium alloy extruded bar and nanometric Al2O3 powder were subjected to friction stir processing at a substrate travel speed of 80 mm/min and a tool rotation speed of 1000 rpm using...

  • Defects in silicon nanowires. Wang, R. P. // Applied Physics Letters;4/3/2006, Vol. 88 Issue 14, p142104 

    Defects in silicon nanowires have been investigated using the electron spin resonance (ESR) method. The ESR signals consist of three features: a strong resonance at g=2.002 49, a weak line at g=2.000 48, and a broad feature at g=2.005 41. From the saturation behavior and oxidation-related and...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics