Comment on “Change of the emission spectra in organic light-emitting diodes by layer thickness modification” [Appl. Phys. Lett. 85, 2944 (2004)]

Shore, Joel D.
May 2005
Applied Physics Letters;5/2/2005, Vol. 86 Issue 18, p186101
Academic Journal
Presents a comment concerning the change of the emission spectra in organic light-emitting diodes. Details on the interface between the indium tin oxide anode and the glass substrate; Characterization of the metallic cathodes; Factors causing the cancellation of various interference effects.


Related Articles

  • Graphene as anode electrode for colloidal quantum dots based light emitting diodes. Klekachev, Alexander V.; Kuznetsov, Sergey N.; Asselberghs, Inge; Cantoro, Mirco; Hun Mun, Jeong; Jin Cho, Byung; Stesmans, André L.; Heyns, Marc M.; De Gendt, Stefan // Applied Physics Letters;7/22/2013, Vol. 103 Issue 4, p043124 

    Graphene films demonstrating low sheet resistance and high transparency in the visible light range are promising to be used as electrodes for light-emitting applications. In this work, we report the implementation of single layer graphene as hole injecting electrode for CdSe/ZnS quantum...

  • Performance improvement of organic light emitting diode with aluminum oxide buffer layer for anode modification. Zhou, L.; Zhuang, J. Y.; Tongay, S.; Su, W. M.; Cui, Z. // Journal of Applied Physics;Aug2013, Vol. 114 Issue 7, p074506 

    A thin Al2O3 insulating buffer layer deposited on indium tin oxide (ITO) anode by atomic layer deposition has been investigated for organic light-emitting diodes (OLEDs). With an optimal thickness of 1.4 nm and low density of structural defects of the Al2O3 film, the OLEDs current efficiency and...

  • Charge injection and accumulation in organic light-emitting diode with PEDOT:PSS anode. Weis, Martin; Takako Otsuka; Dai Taguchi; Takaaki Manaka; Mitsumas Iwamoto // Journal of Applied Physics;2015, Vol. 117 Issue 15, p155503-1 

    Organic light-emitting diode (OLED) displays using flexible substrates have many attractive features. Since transparent conductive oxides do not fit the requirements of flexible devices, conductive polymer poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) has been proposed as...

  • White organic light-emitting diodes based on tandem structures. Guo, Fawen; Ma, Dongge // Applied Physics Letters;10/24/2005, Vol. 87 Issue 17, p173510 

    White organic light-emitting diodes made of two electroluminescent (EL) units connected by a charge generation layer were fabricated. Thus, with a tandem structure of indium tin oxide/N,N′-di(naphthalene-1-yl)-N,N′-diphenyl-benzidine (NPB)/9,10-bis-(β-naphthyl)-anthrene...

  • Plasma damage-free sputtering of indium tin oxide cathode layers for top-emitting organic light-emitting diodes. Han-Ki Kim; Kim, D.-G.; Lee, K.-S.; Huh, M.-S.; Jeong, S. H.; Kim, K. I.; Tae-Yeon Seong // Applied Physics Letters;5/2/2005, Vol. 86 Issue 18, p183503 

    We report on plasma damage-free sputtering of an indium tin oxide (ITO) cathode layer, which was grown by a mirror shape target sputtering (MSTS) technique, for use in top-emitting organic light-emitting diodes (TOLEDs). It is shown that OLEDs with ITO cathodes deposited by MSTS show much lower...

  • Obvious efficiency enhancement of organic light-emitting diodes by parylene-N buffer layer. Hu, Y. M.; He, Y.; Chen, X. Q.; Zhan, Y. Q.; Sun, Z. Y.; You, Y. T.; Hou, X. Y. // Applied Physics Letters;4/16/2012, Vol. 100 Issue 16, p163303 

    A parylene-N (PPXN) buffer layer inserted between anode and organic layers in typical organic light-emitting diodes (OLEDs) based on N, N′-bis(naphthalene-1-yl)-N, N′-bis(phenyl) benzidine (NPB) and tris (8-hydroxyquinolato) aluminum (Alq3) results in significant enhancement of the...

  • The effect of the hole injection layer on the performance of single layer organic light-emitting diodes. Zeng Wenjin; Bi Ran; Zhang Hongmei; Huang Wei // Journal of Applied Physics;2014, Vol. 116 Issue 22, p224502-1 

    Efficient single-layer organic light-emitting diodes (OLEDs) were reported based on a green fluorescent dye 10-(2-benzothiazolyl)-2,3,6,7-tetrahydro-1,1,7,7-tetramethyl-1H,5H,11H-(1) benzopyropyrano (6,7-8-I,j)quinolizin-11-one (C545T). Herein, poly(3,4-ethylenedioxy thiophene) poly(styrene...

  • Interface state and dipole assisted hole injection improvement with 1,4,5,8,-naphthalene-tetracarboxylic-dianhydride in organic light-emitting devices. Pyungeun Jeon; Hyunbok Lee; Jeihyun Lee; Kwangho Jeong; JinWoo Lee; Yeonjin Yi // Applied Physics Letters;8/15/2011, Vol. 99 Issue 7, p073305 

    1,4,5,8-naphthalene-tetracarboxylic-dianhydride (NTCDA) is known to improve hole injection when inserted between the hole transport layer and the indium tin oxide (ITO) anode in organic light emitting devices. To clarify the origin of the improvement, the interfacial electronic structures...

  • High-efficiency top-emitting organic light-emitting devices. Lu, M.-H.; Weaver, M. S.; Zhou, T. X.; Rothman, M.; Kwong, R. C.; Hack, M.; Brown, J. J. // Applied Physics Letters;11/18/2002, Vol. 81 Issue 21, p3921 

    Based on theoretical arguments that top-emitting organic light-emitting devices (TOLEDs) can be more efficient than equivalent bottom-emitting devices, we fabricated TOLEDs comprising reflective anodes and transparent compound cathodes that emit 20.8% more photons in the forward 120° cone...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics