LEED Opportunities for Raised Floors in Schools

Beaty, Don; Lanni, John
May 2005
Heating/Piping/Air Conditioning Engineering;May2005, Vol. 77 Issue 5, p33
Provides information on the compliance of schools with the Leadership in Energy and Environmental Design (LEED) Green Building Rating System of the U.S. Green Building Council. Reasons for implementing an underfloor-air-distribution system in a school, including lower energy consumption; Levels of LEED certification; List of LEED credits such as thermal comfort.


Related Articles

  • Predicting Comfort Temperature in Indonesia, an Initial Step to Reduce Cooling Energy Consumption. Tri Harso Karyono // Buildings (2075-5309);2015, Vol. 5 Issue 3, p802 

    Indonesia has no reliable thermal comfort standard that is based on research works. The current national standard (SNI 6390:2011) states only a single range of comfort temperature that is 25.5 °C Ta, with a range of +1.5 °C Ta. Previous thermal studies in a number of different buildings in...

  • An Assessment of Thermal Comfort and Users' Perceptions of Landscape Gardens in a High-Rise Office Building. Taib, Nooriati; Abdullah, Aidrin; Syed Fadzil, Sharifah Fairuz; Foong Swee Yeok // Journal of Sustainable Development;2010, Vol. 3 Issue 4, p153 

    There is a great need to reduce energy consumption in high-rise office buildings due to escalating environmental problems such as Urban Heat Island effect and global warming. The creation of landscape spaces in high-rise buildings today is not only for reducing building heat but to provide views...

  • Sustainable Governing. Kuhn, Fred // Governing;Aug2011, Vol. 24 Issue 11, p4 

    The article discusses the concept of sustainable governing and efficient energy use as related by Robert Yaro, president of the Regional Plan Association, during Governing's Summit on Sustainability held in June 2011.

  • TURNING ON SAVINGS. Kennedy, Mike // American School & University;Dec2000, Vol. 73 Issue 4, p20 

    Focuses on the energy conservation programs of schools in the United States. Information on the energy improvements of Portland Public Schools district in Oregon; Details on the construction of Oak Park Unified School District's joint-use library in California; Efforts of schools to seek out...

  • Fuel For Thought. Garfman, Cornel // Scholastic Scope;11/13/2006, Vol. 55 Issue 6/7, p12 

    The article focuses on the efforts made by various schools in the U.S. to conserve fuel following an increase in petroleum prices.

  • Application of Fuzzy Logic in Control of Thermal Comfort. Stephen, Elizabeth Amudhini; Shnathi, Mercy; Rajalakshmy, P.; Parthido, M. Melbern // International Journal of Computational & Applied Mathematics;2010, Vol. 5 Issue 3, p289 

    Providing thermal comfort and saving energy are two main goals of heating, ventilation and air conditioning (HVAC) systems. A controller with temperature feedback cannot best achieve the thermal comfort. This is because thermal comfort is influenced by many variables such as, temperature,...

  • Impact of Building Refurbishment on the Operative Temperature and PMV. Kalmár, Ferenc; Kalmár, Tünde // Advanced Materials Research;2014, Issue 1041, p325 

    Energy saving is one of the main priorities in the building sector. In the last years in Hungary different national programs were launched in order to improve the thermal properties of residential buildings. In case of building refurbishment 40-60% heating energy savings were expected. There...

  • Energy Performance, Comfort, and Lessons Learned from a Near Net Zero Energy Solar House. Doiron, Matt; O'Brien, William; Athienitis, Andreas // ASHRAE Transactions;2011, Vol. 117 Issue 2, p585 

    This paper examines the performance of a Canadian near-net zero energy solar house, known as ÉcoTerra, located near Montreal. The total energy consumption and energy end-use breakdown are presented and several findings from the energy analysis discussed, such as the importance of occupant...

  • ROOM AIR DISTRIBUTION OPTIMIZATION. Rawnee Ho; Ismail, M. R. // Proceedings of the International Building & Infrastructure Techn;2014, p287 

    Room air distribution and cooling load estimation for room/building are based on standard design approach (cooling estimation). The knowledge about the airflow distribution on a room/building is based on pattern inside the room/building need to be considered. Most room/building airflow...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics