TITLE

Corrosion Mitigation of Mild Steel by New Rare Earth Cinnamate Compounds

AUTHOR(S)
Blin, F.; Leary, S. G.; Wilson, K.; Deacon, G. B.; Junk, P. C.; Forsyth, M.
PUB. DATE
June 2004
SOURCE
Journal of Applied Electrochemistry;Jun2004, Vol. 34 Issue 6, p591
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Corrosion rate measurements based on weight loss (i.e., mild steel immersed for seven days in 0.01 M NaCl) and linear polarization resistance (LPR) techniques have shown that even low concentrations (200 ppm) of cerium and lanthanum cinnamates are able to significantly inhibit corrosion. Of all the compounds investigated in this work Ce(4-methoxycinnamate)3 � 2 H2O and La(4-methoxycinnamate)3 � 2 H2O compounds exhibited the greatest inhibition and, in comparison with the component inhibitors, a synergy was clearly observed. The mechanism of corrosion inhibition was investigated using cyclic potentiodynamic polarization (CPP) measurements. The results suggest that La(4-nitrocinnamate)3 � 2 H2O and Ce(4-methoxycinnamate)3 � 2 H2O behave as mixed inhibitors and improve the resistance of steel against localized attack.
ACCESSION #
16781928

 

Related Articles

  • Accuracy of bound peptide structures determined by exchange transferred nuclear Overhauser data: A simulation study. Eisenmesser, Elan Zohar; Zabell, Adam P.R.; Post, Carol Beth // Journal of Biomolecular NMR;May2000, Vol. 17 Issue 1, p17 

    The exchange-transferred NOE method to determine the three-dimensional structure of peptides bound to proteins, or other macromolecular systems, is becoming increasingly important in drug design efforts and for large or multicomponent assemblies, such as membrane receptors, where structural...

  • Peculiarities of the Passivation of Pearlitic Steels in Solutions Containing Aluminum Ions. Prozorov, V. V.; Sergienko, M. A.; Gusarov, V. I.; Doil'nitsyn, V. A.; Lysenko, A. A.; Pavlenko, V. I. // Protection of Metals;Sep/Oct2003, Vol. 39 Issue 5, p499 

    The formation of mixed oxide films containing iron and aluminum is ascertained during the passivation of pearlitic steels in aluminum-containing solutions. The oxide films are primarily formed at the most corrosion-active areas of steel. The passivation of steel in the presence of aluminum ions...

  • Corrosion prognosis for metals with oxygen depolarization. Chernov, B. B.; Kovalev, O. P.; Volkov, A. V. // Protection of Metals;May2008, Vol. 44 Issue 3, p289 

    Based on the results of corrosion tests, the penetration coefficients of corrosion products and the steady-state corrosion rate of an CT-3 steel are statistically assessed as a function of the oxygen concentration distribution.

  • GOOD IDEAS & SHORT CUTS. Hamilton, J.; Logan, Alan // Australian Woodworker;Oct2013, Issue 171, p29 

    The article offers tips and suggestions from the readers of the periodical on how to make a rusted tool usable and what precautions should be taken when turning hollow ware.

  • Structure and Composition of Scales Formed on AISI 316 L Steel Alloyed with Ce/La Using High Intensity Plasma Pulses after Oxidation in 1000°C. Sartowska, B.; Piekoszewski, J.; Waliś, L.; Barlak, M.; Starosta, W.; Pochrybniak, C.; Bocheńska, K. // Acta Physica Polonica, A.;Jul2011, Vol. 120 Issue 1, p83 

    It is well documented that the high oxygen affinity elements such as Y, Ce, La, Er and other rare earth elements added to steel in small amounts can improve their high temperature oxidation resistance. Rare earth elements can be either alloyed during the steel making process or introduced...

  • Thermomechanical Processing of Fe-6.9Al-2Cr-0.88C Steel: Intercritical Annealing Followed by Quench Tempering. Mohamed, Masoud; Farahat, Ahmed // Metallurgical & Materials Transactions. Part A;Jan2015, Vol. 46 Issue 1, p199 

    A hot forged Fe-0.88 pct C-6.9 pct Al steel was intercritically annealed at temperatures in the range of 1173 K to 1283 K (900 °C to 1010 °C), and subsequently tempered at 623 K (350 °C) to enhance the mechanical properties by microstructure modification. Room temperature compression...

  • The Deal with Steel. DIXON, CHRIS // Walls & Ceilings;Jan2009, Vol. 72 Issue 1, p82 

    The article discusses the good and bad environmental impacts of steel. As stated, steel gets high green building rating system points due to its high recycled content and its high reconcilability. On the other hand, steel uses high energy to make, has poor thermal conductivity, and is highly...

  • Metal Roof Application Methods. D'Annunzio, John A. // Roofing Contractor;Oct2012, Vol. 32 Issue 10, p18 

    The article discusses methods for installing metal roofs. According to the author, metal systems require proper attachment procedures, provisions for expansion and contraction. He also mentions common problems including buckling and rust and corrosion of the panels, and backing out of the...

  • Inhibition of Langerhans Cell ATPase and Contact Sensitization by Lanthanides--Role of T-Suppressor Cells. Gruner, Stefan; Diezel, Wolfgang; Strunk, Dirk; Eckert, Rolf; Siems, Werner; Anhalt, Grant J. // Journal of Investigative Dermatology;Sep91, Vol. 97 Issue 3, p478 

    Lanthanides are rare earths, elements 55-71 in the periodic table, that are of interest in biologic systems as isomorphic competitors for calcium binding sites. Lanthanides were tested for their inhibitory influence on the Ca++/Mg++-dependent ATPase of epidermal langerhans cells in vitro, and on...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics