TITLE

Effect of PgTPhPBr on the electrochemical and corrosion behaviour of 304 stainless steel in H2SO4 solution

AUTHOR(S)
Hermas, A.A.; Morad, M.S.; Wahdan, M.H.
PUB. DATE
January 2004
SOURCE
Journal of Applied Electrochemistry;Jan2004, Vol. 34 Issue 1, p95
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Weight-loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) measurements were used to study the inhibition of 304 stainless steel corrosion in 1 M H2SO4 at 50 °C by propargyltriphenylphosphonium bromide (PgTPhPBr). The inhibiting effects of propyltriphenylphosphonium bromide (PrTPhPBr) and propargyl alcohol (PA) were also studied for the sake of comparison. For the investigated compounds, Tafel extrapolation in the cathodic region gave a corrosion inhibition efficiency of 98% at 1 × 10-3 M. Adsorption of both PgTPhPBr and PA was found to follow Frumkin's isotherm while adsorption of PrTPhPBr obeys that of Temkin. In the anodic domain, PgTPhPBr acted as a good passivator. The impedance spectra recorded at the corrosion potential (Ecor) revealed that the charge transfer process in the inhibited and uninhibited states controls corrosion of 304 stainless steel.
ACCESSION #
16781874

 

Related Articles

  • Chaos-Order Transitions During Electrochemical Corrosion of Silicon. Parkhutik, Vitali; Matveyeva, Eugenia // AIP Conference Proceedings;2005, Vol. 780 Issue 1, p631 

    In a series of recent works performed at the R&D Centre MTM we have registered and analysed quite intriguing effects of oscillating current and voltage during silicon electrochemical treatments in fluoride-containing electrolytes. Depending on the experimental conditions the oscillations can...

  • The Electrochemical Noise Technique — Applications in Corrosion Research. Mansfeld, Florian // AIP Conference Proceedings;2005, Vol. 780 Issue 1, p625 

    Some of the applications of the electrochemical noise (ECN) technique in corrosion research as well as some of the promises and realities concerning the use of electrochemical noise analysis (ENA) are discussed. Perceived advantages of ENA include the ease of data collection and analysis. It is...

  • Electroactive polymer films for stainless steel corrosion protection. Herrasti, P.; Ocón, P.; Ibáñez, A.; Fatás, E. // Journal of Applied Electrochemistry;Jun2003, Vol. 33 Issue 6, p533 

    Electroactive polymer films of polyaniline, poly-o-toluidine and a composite of both were deposited on stainless steel and their performance as protective coatings against corrosion was evaluated. Open circuit potential and potentiodynamic studies of the polymer-coated stainless steel in a...

  • Kinetics of phase transformations in a binary alloy surface layer at the selective dissolution. I. Theoretical analysis. Kozaderov, O. A.; Koroleva, O. V.; Vvedenskii, A. V. // Protection of Metals & Physical Chemistry of Surfaces;Jan2009, Vol. 45 Issue 1, p31 

    A procedure of estimating the formation rate of the individual phase of an electrochemically positive component B0 at the anodic selective dissolution or corrosion of an A-B alloy in a potential range above the critical potential of the development of a morphologically unstable surface is...

  • Index to Volume 33 (2003).  // Journal of Applied Electrochemistry;Dec2003, Vol. 33 Issue 12, p1247 

    The article presents a subject index of terms related to electrochemistry. Some of the topics mentioned in the index are, corrosion behaviour of tantalum in sodium hydroxide solutions; inhibition of acid corrosion of steel using cetylpyridinium chloride; protection of copper corrosion by...

  • Physico-chemical aspects of protection of metals by organic corrosion inhibitors. Kuznetsov, Yu. // Protection of Metals & Physical Chemistry of Surfaces;Dec2015, Vol. 51 Issue 7, p1111 

    Investigations of organic corrosion inhibitors carried out under my guidance at the Frumkin Institute of Physical Chemistry and Electrochemistry are briefly overviewed. Achievements in synthesis of new generation of volatile metal corrosion inhibitors are examined. The possibility of passivating...

  • Measuring secondary phases in duplex stainless steels. Calliari, I.; Brunelli, K.; Dabalà, M.; Ramous, E. // JOM: The Journal of The Minerals, Metals & Materials Society (TM;Jan2009, Vol. 61 Issue 1, p80 

    The use of duplex stainless steels is limited by their susceptibility to the formation of dangerous intermetallic phases resulting in detrimental effects on impact toughness and corrosion resistance. This precipitation and the quantitative determinations of the phases have received considerable...

  • Role of Environmental Variables on the Stress Corrosion Cracking of Sensitized AISI Type 304 Stainless Steel (SS304) in Thiosulfate Solutions. Roychowdhury, S.; Ghosal, S. K.; De, P. K. // Journal of Materials Engineering & Performance;Oct2004, Vol. 13 Issue 5, p575 

    The stress corrosion cracking (SCC) behavior of sensitized AISI type 304 stainless steel (SS304) has been studied in dilute thiosulfate solutions as a function of thiosuifate concentrations and applied potentials. The susceptibility to SCC was observed to increase with thiosulfate concentrations...

  • Microbes influenced corrosion study on cathodic electrodeposition coating system - A comparative study. Maurya, Sanyal // Paintindia;Nov2013, Vol. 63 Issue 11, p105 

    Corrosion is generally an electrochemical process; electrochemical measurements can provide a great deal information on rate and mechanism of corrosion. This study focuses on the evaluation of corrosion protection performance of cathodic electrodeposion paint (hereafter referred to as CED paint)...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics