TITLE

Electrodeposition of copper–zinc alloys in pyrophosphate-based electrolytes

AUTHOR(S)
Senna, L.F.; Díaz, S.L.; Sathler, L.
PUB. DATE
December 2003
SOURCE
Journal of Applied Electrochemistry;Dec2003, Vol. 33 Issue 12, p1155
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Copper–zinc alloy coatings were deposited on mild steel substrates using pyrophosphate-based electrolytes at room temperature and under continuous current. The use of polyligand electrolytes was also investigated, as well as the influence of organic additives on the composition, morphology and electrochemical properties of the coatings. The results showed that good quality copper–zinc alloy deposits could be produced in pyrophosphate-based polyligand electrolytes, especially with the addition of allyl alcohol.
ACCESSION #
16781861

 

Related Articles

  • Response surface modeling and optimization to study the influence of deposition parameters on the electrodeposition of Cu—Zn alloys in citrate medium. Ferreira, F.; Silva, F.; Luna, A.; Lago, D.; Senna, L. // Journal of Applied Electrochemistry;Apr2007, Vol. 37 Issue 4, p473 

    Copper–zinc alloy coatings were deposited on mild steel substrates using sodium citrate electrolytes at room temperature and under direct current. For the bath composition studied, factorial design was used to verify the influence of deposition parameters, such as current density and...

  • Effective zinc nickel. Wynn, Paul // Product Finishing;Jul/Aug2000, Vol. 53 Issue 7, p8 

    Describes control systems needed to effectively operate zinc nickel electroplating. Operation and control of a basic electrolyte of zinc metal and sodium hydroxide; Obtaining and controlling the alloy content; Basic process parameters that require more attention; Continuous filtration; Deposit...

  • Electrodeposition of FeCoNiCu nanowires. Huang, Q.; Davis, D.; Podlaha, E. J. // Journal of Applied Electrochemistry;Aug2006, Vol. 36 Issue 8, p871 

    Electrodeposition of FeCoNiCu/Cu nanometric, compositionally modulated alloy nanowires is presented. Pure Cu nanowires and Co-rich FeCoNiCu alloy nanowires were deposited from a single electrolyte. A double potential pulse scheme was used for multilayer deposition and significant anodic...

  • ELECTRODEPOSITION OF ZINC-NICKEL ALLOY FROM OXALATE AND PYROPHOSPHATE ELECTROLYTES. SHEKHANOV, R. F.; GRIDCHIN, S. N.; BALMASOV, A. V. // Izvestiya Vysshikh Uchebnykh Zavedenii. Seriya Khimiya i Khimich;2013, Vol. 56 Issue 10, p95 

    Processes of electrodeposition of zinc-nickel alloy from oxalate and pyrophosphate electrolytes were investigated. The possibility of obtaining the good-quality electroplating was shown at current densities from 0.5 to 5.0 A/dm².

  • Effects of conductive polyaniline (PANI) preparation and platinum electrodeposition on electroactivity of methanol oxidation. Zhou, H. H.; Jiao, S. Q.; Chen, J. H.; Wei, W. Z.; Kuang, Y. F. // Journal of Applied Electrochemistry;Apr2004, Vol. 34 Issue 4, p455 

    A modified galvanostatic method, termed the �pulse galvanostatic method� (PGM) was used to synthesize nanofibular polyaniline (PANI). In contrast to granular PANI prepared by the conventional galvanostatic method (GM), nanofibular PANI has better conductivity and higher specific...

  • Effect of crown ether on the electrodeposition of a copper-cadmium alloy from aqueous-ethanol perchlorate baths. Kuznetsov, V.; Skibina, L.; Geshels’, S. // Protection of Metals;Jan2006, Vol. 42 Issue 1, p75 

    A correlation between the effect of crown ether on the electrodeposition of a Cu-Cd alloy from perchlorate aqueous-ethanol baths and the liquid phase composition was found. The best inhibition by crown ether was found to occur in a range of the water structure stabilization by ethanol molecules...

  • Co-electrodeposition and Characterization of Cu (In, Ga)Se2 thin films. Xia Donglin; Xu Man; Li Jianzhuang; Zhao Xiujian // Journal of Materials Science;Apr2006, Vol. 41 Issue 7, p1875 

    Cu (In, Ga)Se2(CIGS) thin films were electrodeposited on Mo-coated soda lime glass substrate by the electrodeposition technique. The chemical bath for co-electrodeposition was prepared from copper chloride, indium chloride, gallium chloride and selenous acid. The effect of different chemical...

  • Electrochemical co-deposition of ternary Sn–Bi–Cu films for solder bumping applications. Joseph, Shany; Phatak, Girish J.; Gurunathan, K.; Seth, Tanay; Amalnerkar, D. P.; Kutty, T. R. N. // Journal of Applied Electrochemistry;Aug2006, Vol. 36 Issue 8, p907 

    This paper reports the co-deposition of Sn–Bi–Cu films using stannic salt bath which has good stability for up to a week. The effect of current density and bath stirring on the film composition and microstructure has been studied. The deposited films are rich in the more noble...

  • DSC analysis of Cu-Zn-Sn shape memory alloy fabricated via electrodeposition route. Espiritu, Richard; Amorsolo, Alberto // Journal of Thermal Analysis & Calorimetry;Feb2012, Vol. 107 Issue 2, p483 

    Cu-Zn-Sn shape memory alloy strips with composition range of 13.70-46.30 mass% Sn were fabricated by electrodepositing Sn on a shim brass surface and then subsequently annealed at a constant temperature of 400 °C for 120 min under flowing nitrogen. Subjecting the Sn-plated strips to...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics