TITLE

Anodic behaviour of arsenopyrite and cathodic reduction of ferrate(VI) and oxygen in alkaline solutions

AUTHOR(S)
Nicol, M.J.; Guresin, N.
PUB. DATE
November 2003
SOURCE
Journal of Applied Electrochemistry;Nov2003, Vol. 33 Issue 11, p1017
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper presents the results of an electrochemical study of the anodic characteristics of arsenopyrite in strongly alkaline solutions and of the cathodic reduction of ferrate(VI) and of dissolved oxygen at an arsenopyrite surface at potentials which are relevant to the oxidation reactions. Cyclic voltammetry at both arsenopyrite disc and arsenopyrite disc/platinum ring electrodes has shown that arsenic(III) is the main product of the anodic process at potentials in the region of the rest potential during oxidation by either ferrate(VI) or oxygen. Evidence for partial passivation of both the anodic and cathodic reactions has been obtained from potentiostatic current–time transients. The initial stage of oxidation by ferrate(VI) has been shown to be mass-transport controlled and this is also true of the oxidation by oxygen in dilute solutions of sodium hydroxide.
ACCESSION #
16781828

 

Related Articles

  • Multicomponent nanocatalysts and fuel cells based on them. Tsivadze, A.; Tarasevich, M.; Bogdanovskaya, V. // Theoretical & Experimental Chemistry;Jan2011, Vol. 46 Issue 6, p393 

    We consider the results of original research on design and study of multicomponent catalytic nanostructures for the major current-generating reactions in fuel cells. The activity and selectivity level of the synthesized catalysts (nanoalloys) determines the efficiency of conversion of chemical...

  • Electrochemical reduction of CI sulphur black 1—correlation between electrochemical parameters and colour depth in exhaust dyeing. Bechtold, T.; Turcanu, A.; Schrott, W. // Journal of Applied Electrochemistry;Jan2008, Vol. 38 Issue 1, p25 

    Direct cathodic reduction of oxidised CI Sulphur Black 1 was achieved by means of a multi-cathode electrolyser at cell currents of 0.9–1.5 A. The redox potential in the catholyte decreased from initially −250 to −533 mV as a function of charge flow. The catholyte also served...

  • APt3Sn/C Electrocatalyst Used as the Cathode and Anode in a Single Direct Ethanol FUel Cell. Parreira, L. S.; Rascio, D. C.; Silva, J. C. M.; De Souza, R. F. B.; Villa-Silva, M. D.; Calegaro, M. L.; Spinacé, E. V.; Neto, A. O.; Santos, M. C. // International Journal of Chemistry;Apr2012, Vol. 4 Issue 2, p38 

    This paper presents a study involving the use of Pt3Sn/C electrocatalysts as cathodes and anodes hi a single direct ethanol fuel cell. First, we studied the oxygen reduction reaction (ORR) using commercial Pt/C from ETEK and Pt3Sn/C as electrocatalysts with an alloy degree of 92%. The...

  • Electrochemical behavior and differential pulse voltammetric determination of paracetamol at a carbon ionic liquid electrode. Xiaodong ShangGuan; Hongfang Zhang; Jianbin Zheng // Analytical & Bioanalytical Chemistry;Jun2008, Vol. 391 Issue 3, p1049 

    The electrochemical behavior of paracetamol in 0.1 M acetate buffer solution (pH 4.6) was investigated at a traditional carbon paste electrode (TCPE) and a carbon ionic liquid electrode (CILE) fabricated by replacing nonconductive organic binders with a conductive hydrophobic room temperature...

  • Photoregenerative I-/I3- couple as a liquid cathode for proton exchange membrane fuel cell. Zhen Liu; Yadong Wang; Xinping Ai; Wenmao Tu; Mu Pan // Scientific Reports;10/31/2014, p1 

    A photoassisted oxygen reduction reaction (ORR) through I-/I3- redox couple was investigated for proton exchange membrane (PEM) fuel cell cathode reaction. The I-/I3- -based liquid cathode was used to replace conventional oxygen cathode, and its discharge product I- was regenerated to I3- by...

  • Microbial fuel cell with an azo-dye-feeding cathode. Liang Liu; Fang-bai Li; Chun-hua Feng; Xiang-Zhong Li // Applied Microbiology & Biotechnology;Nov2009, Vol. 85 Issue 1, p175 

    Microbial fuel cells (MFCs) were constructed using azo dyes as the cathode oxidants to accept the electrons produced from the respiration of Klebsiella pneumoniae strain L17 in the anode. Experimental results showed that a methyl orange (MO)-feeding MFC produced a comparable performance against...

  • Influence of polymer nature on electrochemical reduction of oxygen. Shapoval, G. S.; Kruglyak, O. S. // Polymer Journal (18181724);2013, Vol. 35 Issue 1, p69 

    Electrochemical reduction of oxygen on the copper electrode with adsorbed polymers is investigated. The polymers serve as models of hydrophilic sides of bio-membranes and namely are: polyacrylamide (PAA), albumin and poly aniline (PANI). It is determined that adsorption of PANI and PAA decreases...

  • Alkaline peroxide generation using a novel perforated bipole trickle-bed electrochemical reactor. Gupta, Neeraj; Oloman, Colin // Journal of Applied Electrochemistry;Feb2006, Vol. 36 Issue 2, p255 

    A novel perforated bipole trickle-bed electrochemical reactor is investigated for the electro-synthesis of alkaline peroxide. The process uses a relatively simple cell configuration in which a single electrolyte flows with oxygen gas in a flow-by graphite felt cathode, sandwiched between a...

  • ELECTRODES ON THE BASIS OF NANOCRYSTALLINE TI AND ZR OXIDES FOR DETERMINATION OF DISSOLVED OXYGEN CONCENTRATION. Kolbasova, I. G.; Linyucheva, O. V.; Vorobets, V. S.; Kolbasov, G. Ya. // Naukovi visti NTUU - KPI;2007, Vol. 2007 Issue 1, p121 

    It is proposed to use nanocrystalline TiO2-ZrO2 electrodes, made by sol-gel method, as the sensitive element of dissolved oxygen sensor. It has been shown that the electrodes have stable characteristics in the case of O2 electroreduction in the physiological NaCl solution. The maximum...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics