TITLE

The electroformation of Zr metal, Zr–Al alloy and carbon films on ceramic

AUTHOR(S)
Kawase, M.; Ito, Y.
PUB. DATE
September 2003
SOURCE
Journal of Applied Electrochemistry;Sep2003, Vol. 33 Issue 9, p785
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A method of electroforming Zr metal, Zr–Al alloy and carbon film on ceramic substrates has been developed. Using this method, it is possible to apply these films to ceramic substrates, which are complicated in structure. Zr metal and alloy film are formed in the LiCl–KCl melt containing Zr(II), whereas carbon film is formed in the molten carbonate. The electrode consists of a metal part and the ceramic substrate. The films develop between the metal part and the ceramic substrate and propagate along the surface. To form the film there has to be sufficient initial current density to deposit dendritic Zr, carbon whiskers or cubic carbon particles on the metal part.
ACCESSION #
16781808

 

Related Articles

  • Frequency dependence of the magnetoelectric effect in ceramic composites based on lead zirconate titanate and nickel ferrite. Laletin, V. M.; Petrov, V. M.; Tuskov, D. S.; Srinivasan, G. // Technical Physics Letters;Jan2008, Vol. 34 Issue 1, p83 

    The magnetoelectric (ME) effect in ferrite-piezoelectric ceramic composites based on a nickel ferrite spinel and lead zirconate titanate (PZT) has been theoretically and experimentally studied. Using the method of effective medium, an expression for the ME coefficient is obtained and its...

  • Synthesis and thermal characterization of zirconium titanate pigments. Costa, C.E.F.; Crispim, Samara C.L.; Lima, S.J.G.; Paskocimas, C.A.; Longo, E.; Fernandes Jr., V.J.; Araújo, A.S.; Santos, I.M.G.; Souza, A.G. // Journal of Thermal Analysis & Calorimetry;2004, Vol. 75 Issue 2, p467 

    The objective of this work was to obtain modern pigments based on zirconium titanate doped with nickel and cobalt using polymeric precursor method. Thermal evolution of ZrTiO4 phase was determined. After primary calcination, the material still exhibits two thermal composition events. Calcination...

  • Synthesis of Polypyrrole-Intercalated Grafted Zirconium Phosphate Films by Anodic Electrodeposition and Their Electrochemical Capacities. Takei, Takahiro; Qiang Dong; Yonesaki, Yoshinori; Kumada, Nobuhiro; Kinomura, Nobukazu // Polymers (20734360);Mar2011, Vol. 3 Issue 1, p1 

    Ternary hybrid film composed of α-zirconium phosphate nanosheet, 1,2-bis(dimethylchlorosilyl)ethane and polypyrrole was prepared by anodic electrodeposition. In the hybrid film, ordered α-zirconium nanosheets with grafts by silylation lay down parallel to the substrate and the polypyrrole...

  • Preparation and Characterization of ZrO2 Coating by Sol-Gel on Mullite Short Fiber. Yingna Zhao; Meng Zhang; Jiang Ren; Xiongfeng Zeng // Key Engineering Materials;2014, Vol. 591, p66 

    The modified mullite fiber was used to toughen the mullite ceramic, which can effectively overcome the brittleness of ceramic materials and improve the material strength and toughness. Using 8ZrOCl2·H2O as precursor, anhydrous ethanol as solvent, H2O2 as hydrolysis promoter and NH3·H2O as...

  • Adsorption voltammetry of the zirconium-alizarin red S complex at a multi-walled carbon nanotubes modified carbon paste electrode. Pei-Hong Deng; Jun Zhang; Su-Fen Liao; Ju-Nan Li // Microchimica Acta;May2008, Vol. 161 Issue 1/2, p123 

    We used a carbon paste electrode modified with multi-walled carbon nanotubes as a working electrode and studied the electrochemical behavior of zirconium-alizarin red S complex on it. It was found that the modified electrode exhibited a significant catalytic effect toward the reduction of free...

  • Processing and characterization of ZrB2-based ultra-high temperature monolithic and fibrous monolithic ceramics. Fahrenholtz, W. G.; Hilmas, G. E.; Chamberlain, A. L.; Zimmermann, J. W. // Journal of Materials Science;Oct2004, Vol. 39 Issue 19, p5951 

    Zirconium diboride (ZrB2) based ultra-high temperature ceramics either unmodified or with SiC particulate additions of 10, 20, or 30 volume percent were prepared by conventional hot pressing. The ZrB2-SiC compositions had improved four-point bend strength compared to the ZrB2 prepared in our...

  • Fracture Mechanisms of Zirconium Diboride Ultra-High Temperature Ceramics under Pulse Loading. Skripnyak, Vladimir V.; Bragov, Anatoly M.; Skripnyak, Vladimir A.; Lomunov, Andrey K.; Skripnyak, Evgeniya G.; Vaganova, Irina K. // AIP Conference Proceedings;2017, Vol. 1793 Issue 1, p1 

    Mechanisms of failure in ultra-high temperature ceramics (UHTC) based on zirconium diboride under pulse loading were studied experimentally by the method of SHPB and theoretically. The obtained experimental and numerical data are evidence of the quasi-brittle fracture character of nanostructured...

  • Zr.  // American Heritage Student Science Dictionary;2009, p375 

    The symbol for zirconium is presented.

  • In Your Element: The A-Z of zirconium. Emsley, John // Nature Chemistry;Nov2014, Vol. 6 Issue 11, p1026 

    An abstract of the article "In Your Element: The A-Z of zirconium" by John Emsley is presented.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics