TITLE

Effect of benzylideneacetone on the electrodeposition mechanism of Zn–Co alloy

AUTHOR(S)
Trejo, G.; Ortega, R.; Meas, Y.; Chainet, E.; Ozil, P.
PUB. DATE
May 2003
SOURCE
Journal of Applied Electrochemistry;May2003, Vol. 33 Issue 5, p373
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The influence of benzylideneacetone (BA) on the mechanism of Zn–Co alloy electrodeposition onto AISI 1018 steel was studied in chloride acidic solutions. Results indicate that BA modifies the exchange current densities of zinc and cobalt such that the alloy is electrodeposited via a normal codeposition mechanism. Analysis of the deposits by Auger spectroscopy and X-ray diffraction shows that BA increases the cobalt concentration in the electrodeposited alloys and gives deposits with a constant concentration profile of both Zn and Co. BA also inhibits the formation of zinc hydroxide in the initial deposition stages, which supports the proposed mechanism of normal codeposition. Finally, it is shown that BA modifies the morphology of the deposits by inducing a reduction in the cluster size, leading to compact, smooth and shiny coatings.
ACCESSION #
16781757

 

Related Articles

  • Effects of SiC and Al2O3 particles on the electrodeposition of Zn, Co and ZnCo. I. Electrodeposition in the absence of SiC and Al2O3. Tulio, Paulo; Carlos, Ivani // Journal of Applied Electrochemistry;Feb2009, Vol. 39 Issue 2, p283 

    Electrodeposition of Zn, Co and ZnCo from acid sulfate solutions onto steel was investigated in this first part of a study of the effects of SiC or Al2O3 particles on these processes and the formation of ZnCo–SiC and ZnCo–Al2O3 electrocomposites. Zn electrodeposition shows a...

  • Electrodeposition, composition and structure of Zn–Cr alloys. Boiadjieva, Tz.; Kovacheva, D.; Petrov, K.; Hardcastle, S.; Sklyarov, A.; Monev, M. // Journal of Applied Electrochemistry;Mar2004, Vol. 34 Issue 3, p315 

    The effect of polyethylene glycol (PEG 1500) as additive and of deposition conditions on Zn-Cr alloy electrodeposition from an acidic sulfate electrolyte at room temperature, without agitation was investigated. PEG polarizes the overall cathodic reaction and inhibits Zn deposition. Cr...

  • Growth of highly oriented ZnO films by the two-step electrodeposition technique. Gao, Xiang-Dong; Peng, Fang; Li, Xiao-Min; Yu, Wei-Dong; Qiu, Ji-Jun // Journal of Materials Science;Dec2007, Vol. 42 Issue 23, p9638 

    Compact and transparent ZnO films were deposited on the ITO/glass substrates from zinc nitrate aqueous solution by the two-step electrodeposition technique. While the first potentiostatic step was used to produce ZnO seed layer, the ZnO film growth has been done galvanostatically. Effects of the...

  • Kinetics of copper electrodeposition in the presence of triethyl-benzyl ammonium chloride. Varvara, S.; Muresan, L.; Popescu, I.C.; Maurin, G. // Journal of Applied Electrochemistry;Aug2003, Vol. 33 Issue 8, p685 

    Quasi-steady state hydrodynamic voltammetry at a rotating-disc electrode and electrochemical impedance spectroscopy were used to investigate the influence of triethyl-benzyl-ammonium (TEBA) chloride on the kinetics of copper electrodeposition from sulphate acidic electrolytes. SEM and X-ray...

  • Effect of nucleation mode on the morphology and texture of electrodeposited zinc. Raeissi, K.; Saatchi, A.; Golozar, M. A. // Journal of Applied Electrochemistry;Jul2003, Vol. 33 Issue 7, p635 

    The effect of temperature, pH and current density on the morphology and texture of electrodeposited zinc on mechanically polished steel was studied. The electrodeposited zinc had mostly basal (0 0 0 2) and low angle planes (1014, 1013, 1012) parallel to the surface. At pH 2, increasing...

  • Mechanical plating 2. Wynn, Paul // Product Finishing;Apr2001, Vol. 54 Issue 4, p5 

    This series concludes with a review of process materials and performance benefits for this alternative system to electrodeposition and hot dip galvanizing. Additions of proprietary chemistry are made according to the total surface area of parts to be processed. They serve several functions in...

  • On the observation of inductive high-frequency impedance behaviour during the electrodeposition of Au–Sn alloys. Bozzini, Benedetto; Mele, Claudio; Sgura, Ivonne // Journal of Applied Electrochemistry;Mar2004, Vol. 34 Issue 3, p277 

    inductive high-frequency impedance behaviour is often observed in metal electrodeposition systems. This behaviour is typically attributed to equipment limitations or non-idealities in the cell set-up and electrical connections. Such instrumental artefacts would nevertheless be relevant to a...

  • Development of an Electrodeposited Nanomold from Compositionally Modulated Alloys. Che-Yih Lim; Huang, Q.; Xie, X.; Safir, A.; Harfenist, S.A.; Cohn, R.; Podlaha, E.J. // Journal of Applied Electrochemistry;Aug2004, Vol. 34 Issue 8, p857 

    Electrodeposited multilayers of NiCu/Cu and NiFeCu/Cu were examined for nanoimprinting applications. Layer sizes on the order of 100 nm were deposited and the copper layer etched. Current efficiency and layer composition of electrolytes having different pH values were examined utilizing a...

  • Multiple-step constant current density electrodeposition of continuous metal material with high porosity. Wang, D.L.; Dai, C.S.; Wu, N.; Jiang, Z.H.; Li, J. // Journal of Applied Electrochemistry;Aug2003, Vol. 33 Issue 8, p725 

    A mathematical model has been established to analyse the cathode current during the production of continuous porous metal using a multiple-step electrodeposition technique. The electrodeposition parameters and production line have been optimized to maintain constant current density on the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics