TITLE

Growth, structure, and properties of all-epitaxial ferroelectric (Bi,La)4Ti3O12/Pb(Zr0.4Ti0.6)O3/(Bi,La)4Ti3O12 trilayered thin films on SrRuO3-covered SrTiO3(011) substrates

AUTHOR(S)
Dinghua Bao; Sung Kyun Lee; Xinhua Zhu; Marin Alexe; Dietrich Hesse
PUB. DATE
February 2005
SOURCE
Applied Physics Letters;2/21/2005, Vol. 86 Issue 8, p082906
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
All-epitaxial (Bi , La)4Ti3O12(BLT) /Ph(Zr, Ti)O3(PZT)/(Bi , La)4Ti3O12 trilayered ferroelectric thin films were prepared on SrRuO3 (SRO)-covered SrTiO3(011) substrates by pulsed-laser deposition. Epitaxial relationships were identified to be BLT(118) PZT(011) SrTiO3(011), and BLT[1&bar;1&bar;0] PZT[100] SrTiO3[100]. Atomic force microscopy observation of the surface showed that the upper BLT layer is composed of rod-like grains. Cross-sectional transmission electron microscopy investigations revealed ferroelectric 90° domains in the PZT layer, as well as a rather smooth morphology of the BLTIPZT interfaces. Remanent polarization and coercive field of the trilayered films were 28.1 μC/cm² and 33.7 kV/cm, respectively. The thin films showed a high fatigue resistance at least up to 1010 switching pulse cycles. Obviously, a trilayered structure combines the advantages of PZT and BLT, indicating that the all-epitaxial BLTIPZT/BLT trilayered structure is a promising material combination for ferroclectric memory device applications.
ACCESSION #
16581330

 

Related Articles

  • Reducing azimuthal domains in epitaxial ferroelectric lanthanum-substituted bismuth titanate films using miscut yttria-stabilized zirconia substrates. Sung Kyun Lee; Hesse, Dietrich; Gösele, Ulrich; Ho Nyung Lee // Applied Physics Letters;4/4/2005, Vol. 86 Issue 14, p142903 

    We report the effect of a definite miscut of yttria-stabilized zirconia (YSZ) (100) single-crystal substrates onto the number of azimuthal domain variants within epitaxial La-substituted Bi4Ti3O12 (BLT) ferroelectric thin films as well as within SrRuO3 electrode layers, both grown on these...

  • Fatigue behavior of heterostructured Pb(Zr,Ti)O3/(Bi,Nd)4Ti3O12 ferroelectric thin films. Sim, C. H.; Soon, H. P.; Zhou, Z. H.; Wang, J. // Applied Physics Letters;9/18/2006, Vol. 89 Issue 12, p122905 

    Heterolayered Pb(Zr0.52Ti0.48)O3/(Bi3.15Nd0.85)Ti3O12 (PZT/BNT) thin films were synthesized via a route of combining sol-gel and rf sputtering. A fatigue anomaly is observed for the heterolayered PZT/BNT thin films, where a switchable polarization peak, which is more than five times higher than...

  • Interface effects on highly epitaxial ferroelectric thin films. Lin, Y.; Chen, C. L. // Journal of Materials Science;Oct2009, Vol. 44 Issue 19, p5274 

    Interface effects have been found to play a key role in controlling the epitaxial nature and physical properties on the highly epitaxial ferroelectric thin films. Thin film ferroelectrics are dominantly affected by the strains induced by lattice misfits between the films and the substrates,...

  • Epitaxial/amorphous Ba0.3Sr0.7TiO3 film composite structure for tunable applications. Yamada, Tomoaki; Sherman, Vladimir O.; Nöth, Andreas; Muralt, Paul; Tagantsev, Alexander K.; Setter, Nava // Applied Physics Letters;7/17/2006, Vol. 89 Issue 3, p032905 

    A Ba0.3Sr0.7TiO3 (BST) thin film composite structure was fabricated by means of a selective epitaxial growth process. The epitaxial growth of BST on SrRuO3 electrode surface was selectively achieved at 485 °C using a prepatterned ultrathin amorphous BST layer that locally prevented...

  • A model for fatigue in ferroelectric thin films based on trapping of carriers at interfacial states. Le Rhun, G.; Poullain, G.; Bouregba, R. // Journal of Applied Physics;10/1/2004, Vol. 96 Issue 7, p3876 

    Experimental data on fatigue in the Metal/Ferroelectric/Metal thin film structures are reported. A model is proposed based on the trapping and the releasing of the free carriers in the band-gap states located at the interfaces between the electrodes and the ferroelectric film. Fits of the...

  • Room-temperature tunable microwave properties of strained SrTiO3 films. Wontae Chang; Kirchoefer, Steven W.; Pond, Jeffrey M.; Bellotti, Jeffrey A.; Qadri, Syed B.; Haeni, Jeffrey H.; Schlom, Darrell G. // Journal of Applied Physics;12/1/2004, Vol. 96 Issue 11, p6629 

    Structural distortion of ferroelectric thin films caused by film strain has a strong impact on the microwave dielectric properties. SrTiO3 thin films epitaxially grown on (110) DyScO3 substrates using molecular beam epitaxy are extremely strained (i.e., ∼1% in-plane tensional strain) from...

  • Electrical properties of chemical-solution-derived Bi[sub 3.54]Nd[sub 0.46]Ti[sub 3]O[sub 12] ferroelectric thin films. Di Wu; Yidong Xia, K.; Aidong Li; Zhiguo Liu; Naiben Ming // Journal of Applied Physics;12/1/2003, Vol. 94 Issue 11, p7376 

    Bi[sub 3.54]Nd[sub 0.46]Ti[sub 3]O[sub 12] (BNdT) thin films were prepared on Pt/TiO[sub 2]/SiO[sub 2]/Si substrates by chemical solution deposition. X-ray diffraction measurement indicated the polycrystalline nature of these films. Ferroelectric, dielectric, and leakage current characteristics...

  • Possible manifestation of spin fluctuations in the temperature behavior of the resistivity of Sm1.85Ce0.15CuO4 thin films. Sergeenkov, S.; Lanfredi, A.; Araujo-Moreira, F. // JETP Letters;Jul2007, Vol. 85 Issue 11, p592 

    A pronounced step-like (kink) behavior in the temperature dependence of resistivity ρ( T) is observed in the optimally doped Sm1.85Ce0.15CuO4 thin films around T sf = 87 K and attributed to the manifestation of strong-spin fluctuations induced by Sm3+ moments with the energy ħωsf = k B...

  • Structural and magnetic studies of CTAC-assisted NiZn ferrite films by spray deposition. Rongzhou Gong; Xiang Shen; Zekun Feng; Haifeng Li; Xian Wang; Huahui He // Journal of Materials Science: Materials in Electronics;Oct2007, Vol. 18 Issue 10, p1045 

    Spinel NiZn ferrite thin films were performed on polycarbonate glass substrates by spray deposited method at low temperature (<90 °C). After addition of cetyltrimethylammonium chloride(CTAC) made the adsorptive energy of substrate surface increase, smooth surface and uniform columnar film...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics