TITLE

Effects of ultrasonics on the properties of continuous nickel foam

AUTHOR(S)
Dai, C.S.; Wang, D.L.; Hu, X.G.; Ding, F.
PUB. DATE
March 2005
SOURCE
Journal of Applied Electrochemistry;Mar2005, Vol. 35 Issue 3, p311
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Environmental pollution and high cost are two typical problems when vacuum gas deposition or electroless nickel conductive technology is applied to the production of continuous nickel foam. To solve these problems, conductive colloid coating technology is usually used. But the continuous nickel foam obtained via this method has drawbacks, such as low tensile strength and elongation, high deposit thickness ratios (DTRs), inhomogeneous surface density distribution and inhomogeneous morphology. In this work, ultrasonic treatment was applied to certain production stages to investigate the effects on the properties of continuous nickel foam mentioned above. It was found through the comparison of the results obtained that using ultrasonic waves can significantly improve the structures and performances of continuous nickel foam.
ACCESSION #
16510750

 

Related Articles

  • Imaging based on the ultrasonic vibration potential. Beveridge, Andrew C.; Wang, Shougang; Diebold, Gerald J. // Applied Physics Letters;11/29/2004, Vol. 85 Issue 22, p5466 

    An ultrasonic wave traversing a colloidal suspension causes distortion of the charge distributions at the sites of individual colloidal particles producing a voltage known as the ultrasonic vibration potential. We show how imaging of colloidal regions within a body can be carried out using a...

  • Acoustic Nonlinearity in Polycrystalline Nickel from Fatigue-Generated Microstructures. Cantrell, John H. // AIP Conference Proceedings;2005, Vol. 760 Issue 1, p337 

    An analytical model of the nonlinear interaction of ultrasonic waves with dislocation substructures formed during the fatigue of wavy slip metals is presented. The model is applied to the calculation of the acoustic nonlinearity parameters β of polycrystalline nickel for increasingly higher...

  • Ultrasonic Characterization of Aging Behavior in M250 Grade Maraging Steel. Yeheskel, Ori // Metallurgical & Materials Transactions. Part A;Mar2009, Vol. 40 Issue 3, p684 

    The increase in sound velocities during the aging of M250 maraging steel reported by Rajkumar et al. was analyzed. The present article provides a new perspective on why and to what extent the sound velocities change during aging. The main parameter that affects the elastic moduli and the sound...

  • Nickel adsorption in two Oxisols and an Alfisol as affected by pH, nature of the electrolyte, and ionic strength of soil solution. Moreira, Cindy Silva; Casagrande, José Carlos; Ferracciü Alleoni, Luís Reynaldo; De Camargo, Otávio Antônio; Berton, Ronaldo Severiano // Journal of Soils & Sediments: Protection, Risk Assessment, & Rem;Dec2008, Vol. 8 Issue 6, p442 

    Background, aim, and scope The retention of potentially toxic metals in highly weathered soils can follow different pathways that variably affect their mobility and availability in the soil-water-plant system. This study aimed to evaluate the effects of pH, nature of electrolyte, and ionic...

  • A comparative analysis of energy and CO2 taxes on the primary energy mix for electricity generation. Kris Voorspools; Inneke Peersman; William D'haeseleer // International Journal of Energy Research;Aug2005, Vol. 29 Issue 10, p879 

    In many countries, economies are moving towards internalization of external costs of greenhouse-gas (GHG) emissions. This can best be achieved by either imposing additional taxes or by using an emission-permit-trading scheme.The electricity sector is under scrutiny in the allocation of...

  • Tracking down the noise polluters. Fahy, Frank // New Scientist;11/10/90, Vol. 128 Issue 1742, p43 

    Describes efforts by engineers to find an accurate and efficient way to measure sound. Guidelines of the International Standards Organization; Theories; Sound pressure and intensity; Devices for measurement. INSET: Sound units for reflecting what we hear..

  • Evaluierung der Sicherheit von Tiefbrunnen durch Ultraschallmessungen. Klieber, Christoph; Brill, Thilo M. // Technisches Messen;Feb2019, Vol. 86 Issue 2, p104 

    In der Öl- und Gasproduktion wird nach der Bohrung ein Stahlrohr, genannt Futterrohr, in das mehrere Kilometer tiefe Bohrloch eingeführt und der Ringraum zwischen Rohr und Gestein, genannt Annulus, mit Zement verfüllt. Die vollständige Füllung des Ringraums mit Zement bewirkt...

  • Correlation between Local Ultrasonic Properties and Grain Size within Jet-Engine Nickel Alloy Billets. Haldipur, P.; Margetan, F. J.; Thompson, R. B. // AIP Conference Proceedings;2003, Vol. 657 Issue 1, p1355 

    Ultrasonic velocity, attenuation, and back-scattered grain noise have been measured in rectangular coupons cut from representative 10″-diameter billets of IN718 and Waspaloy. Ultrasonic attenuation and backscattered noise were found to vary significantly with position within a billet,...

  • Ultrasonic attenuation measurements in jet-engine nickel alloys. Haldipur, P.; Margetan, F. J.; Yu, Linxiao; Thompson, R. B.; Turner, Joseph A. // AIP Conference Proceedings;2001, Vol. 557 Issue 1, p1338 

    Ultrasonic attenuation plays a role in the inspection of metals, and accurate attenuation values are needed when making probability of detection estimates for internal defects in components. In this work we assess four broadband, pulse/echo, immersion methods for measuring attenuation by...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics