TITLE

The effect of C60 doping on the device performance of organic light-emitting diodes

AUTHOR(S)
Lee, Jun Yeob; Kwon, Jang Hyuk
PUB. DATE
February 2005
SOURCE
Applied Physics Letters;2/7/2005, Vol. 86 Issue 6, p063514
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The effect of C60 doping in the hole transport layer on the device performance of phosphorescent light-emitting diodes was investigated by changing the C60 content from 0% to 3%. Doping of C60 in 1,3,5-tris(N,N-bis-(4,5-methoxyphenyl)-aminophenyl)benzol resulted in efficient hole injection and low driving voltage at high luminance. In addition, the lifetime of the phosphorescent device was improved significantly by introducing a C60 molecule in the hole transport layer. The C60-doped device showed an extended lifetime of 1400 h compared with 700 h of the undoped device.
ACCESSION #
16345418

 

Related Articles

  • Efficient multilayer white polymer light-emitting diodes with aluminum cathodes. Niu, Xiaodi; Qin, Chuanjiang; Zhang, Baohua; Yang, Junwei; Xie, Zhiyuan; Cheng, Yanxiang; Wang, Lixiang // Applied Physics Letters;5/14/2007, Vol. 90 Issue 20, p203513 

    Efficient multilayer white polymer light-emitting diodes (WPLEDs) with aluminum cathodes are fabricated. The multilayer structure is composed of a water soluble hole-injection layer, a toluene-soluble emissive layer, and an alcohol-soluble emissive layer. The polarity difference of the solvents...

  • Fabrication and electroluminescence of double-layered organic light-emitting diodes with the.... Li, F.; Tang, H. // Applied Physics Letters;3/10/1997, Vol. 70 Issue 10, p1233 

    Examines the fabrication and electroluminescence (EL) of double-layered organic light-emitting diodes with the aluminum oxide/aluminum cathode. Improvement of injection and EL output with aluminum oxide addition; Factors contributing to the improvement; Explanation on the behavior of small...

  • Light outcoupling efficiency of top-emitting organic light-emitting diodes. Smith, L. H.; Wasey, J. A. E.; Barnes, W. L. // Applied Physics Letters;4/19/2004, Vol. 84 Issue 16, p2986 

    We report results obtained from modeling the light outcoupling efficiency of top–emitting organic light-emitting diode (OLED) structures and compare them with results from conventional substrate-emitting structures. We investigate two types of emissive material, small molecule and...

  • Highly efficient electroluminescent materials based on fluorinated organometallic iridium compounds. Wang, Y.; Herron, N.; Grushin, V. V.; LeCloux, D.; Petrov, V. // Applied Physics Letters;7/23/2001, Vol. 79 Issue 4 

    We report a class of highly efficient electroluminescent materials based on fluorinated iridium compounds. Using aluminum as the cathode, a device, using fac-tris[5-fluoro-2(5-trifluoromethyl-2-pyridinyl)phenyl-C,N]iridium (Ir-2h) as the luminescent layer, displayed intense electroluminescence...

  • Improved electron injection in polymer light-emitting diodes using anionic conjugated polyelectrolyte. Youngeup Jin; Bazan, Guillermo C.; Heeger, Alan J.; Jin Young Kim; Kwanghee Lee // Applied Physics Letters;9/22/2008, Vol. 93 Issue 12, p123304 

    We report improved performance in polymer light-emitting diodes incorporating conjugated polyelectrolytes as an electron injection layer (EIL). When we introduce water soluble conjugated polymers, poly[9,9′-bis(4-sulfonatobutyl)fluorene-co-alt-1,4-phenylene] (anionic PFP), between the...

  • Efficient blue electroluminescence from neutral alcohol-soluble polyfluorenes with aluminum cathode. Zhou, Gang; Geng, Yanhou; Cheng, Yanxiang; Xie, Zhiyuan; Wang, Lixiang; Jing, Xiabin; Wang, Fosong // Applied Physics Letters;12/4/2006, Vol. 89 Issue 23, p233501 

    Efficient blue polymer light-emitting diodes (PLEDs) have been fabricated with a neutral alcohol-soluble polyfluorene, i.e., poly(9,9-bis(6′-diethoxylphosphorylhexyl)fluorene) (PF-EP), as the emitting layer, high work-function Al as the cathode, and poly(vinyl carbazole) as the...

  • Time-resolved electroluminescence of AlGaN-based light-emitting diodes with emission at 285 nm. Shatalov, M.; Chitnis, A.; Mandavilli, V.; Pachipulusu, R.; Zhang, J. P.; Adivarahan, V.; Wu, S.; Simin, G.; Khan, M. Asif; Tamulaitis, G.; Sereika, A.; Yilmaz, I.; Shur, M. S.; Gaska, R. // Applied Physics Letters;1/13/2003, Vol. 82 Issue 2, p167 

    We present a study on the time evolution of the electreluminescence (EL) spectra of AlGaN-based deep ultraviolet light-emitting diodes (LEDs) under pulsed current pumping. The EL spectra peaks at 285 nm and 330 nm are found to result from recombination involving band-to-band and free carriers to...

  • The charge-trapping and triplet-triplet annihilation processes in organic light-emitting diodes: A duty cycle dependence study on magneto-electroluminescence. Peng, Qiming; Chen, Ping; Li, Feng // Applied Physics Letters;1/14/2013, Vol. 102 Issue 2, p023301 

    We studied the magneto-electroluminescence (MEL) in tri-(8-hydroxyquinoline)-aluminum (Alq3)-based organic light-emitting devices through both steady-state and transient methods. As the magnetic field increases, the MEL exhibits a rapid rise, followed by the saturation tendency at all voltages...

  • High efficiency organic light-emitting devices with Al/NaF cathode. Lee, J.; Park, Y.; Kim, D. Y.; Chu, H. Y.; Lee, H.; Do, L.-M. // Applied Physics Letters;1/13/2003, Vol. 82 Issue 2, p173 

    An organic light-emitting device (OLED) with an Al/NaF (1.5 nm) cathode exhibited a highly enhanced performance comparable to the one with the best Al/LiF cathode. This suggests that NaF can be an alternative to commonly used LiF interlayer for improved OLED performance. Photoelectron...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics