TITLE

In situ detection method for obtaining permeability of Fe-based amorphous alloys: ac resistance measurement for Fe84Nb7B9

AUTHOR(S)
Ichitsubo, Tetsu; Matsubara, Eiichiro; Tanaka, Satoshi; Nishiyama, Nobuyuki; Amiya, Kenji
PUB. DATE
January 2005
SOURCE
Applied Physics Letters;1/17/2005, Vol. 86 Issue 3, p032503
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In this letter, we propose an in situ detection method for obtaining permeability of soft magnetic Fe-based amorphous alloys. The temperature dependence of ac resistance was measured at different frequencies during heat treatment of Fe84Nb7B9 amorphous alloys. A significant increase in the ac (∼1000 kHz) resistance appears at around 920 K during the heating process, which arises from the skin effect caused by a marked increase in sample permeability. This skin effect diminishes when the sample is heated to approximately 1100 K, which corresponds to the decrease in its permeability. Consequently, we note that the ac resistance measurement is useful for quick in situ assessment to achieve the soft magnetic property of an Fe-based amorphous alloy.
ACCESSION #
16345331

 

Related Articles

  • Effect of Ru on microstructural evolution during heat treatment in single crystal superalloys.  // Materials at High Temperatures;May2014, Vol. 31 Issue 2, p155 

    The effect of Ru addition on the as cast microstructure, structural evolution during heat treatment and long term aging was employed in single crystal superalloys with different contents of Ru addition (0, 1·5 and 3·0 wt-%). The results show that NiAl based β phase can occur in the...

  • Absence of long-range chemical ordering in equimolar FeCoCrNi. Lucas, M. S.; Wilks, G. B.; Mauger, L.; Muñoz, J. A.; Senkov, O. N.; Michel, E.; Horwath, J.; Semiatin, S. L.; Stone, M. B.; Abernathy, D. L.; Karapetrova, E. // Applied Physics Letters;6/18/2012, Vol. 100 Issue 25, p251907 

    Equimolar FeCoCrNi alloys have been the topic of recent research as 'high-entropy alloys,' where the name is derived from the high configurational entropy of mixing for a random solid solution. Despite their name, no systematic study of ordering in this alloy system has been performed to date....

  • Improvement of the High-Temperature Thermomechanical Treatment of Rolled Bars from Titanium Alloy VT3-1. Gavze, A. L.; Korostelev, Yu. P. // Metal Science & Heat Treatment;Jul/Aug2002, Vol. 44 Issue 7/8, p348 

    Variation of mechanical properties and structure of bars from alloy VT3-1 obtained with the use of high-temperature thermomechanical treatment (HTTMT) due to their heating and straightening in a stretcher and due to preliminary hot deformation of preforms in a helical rolling mill is described....

  • On incipient melting during high temperature heat treatment of cast Inconel 738 superalloy. Ojo, O. A.; Richards, N. L.; Chaturvedi, M. C. // Journal of Materials Science;Dec2004, Vol. 39 Issue 24, p7401 

    The article reports that Cast Inconel 738 superalloy is one of the most widely used alloys used to manufacture hot section components of aircraft engines and gas power generator turbines, because of its high creep rupture strength and remarkable hot corrosion resistance. The article investigates...

  • A Simple Test Method to Compare the Tensile Strengths of Metallic Substrates Used in YBa2Cu3O7-x Coated Conductors. Varanasi, Chakrapani V.; Chuck, Leon; Chaney, Andrew D.; Barnes, Paul N. // AIP Conference Proceedings;2006, Vol. 824 Issue 1, p758 

    A simple method is developed and used to compare the tensile strengths of metallic substrates used in the YBa2Cu3O7-x (YBCO) coated conductor technology. This method is developed based on the ASTM D3379 tensile test standard method that is recommended for single filament materials. Two different...

  • alloy.  // Taber's Cyclopedic Medical Dictionary (2009);2009, Issue 21, p84 

    An encyclopedia entry for the term "alloy" which refers to a metallic substance which is a product of the mixture of two or more metals is presented.

  • Magnetostriction, elastic moduli, and coupling factors of composite Terfenol-D. Sandlund, L.; Fahlander, M.; Cedell, T.; Clark, A. E.; Restorff, J. B.; Wun-Fogle, M. // Journal of Applied Physics;5/15/1994, Vol. 75 Issue 10, p5656 

    Presents a study which determined the magnetorestriction, elastic moduli and coupling factors of composite terfenol-D. Experimental procedure; Results of the study; Conclusion.

  • Improved material properties of polycrystalline CuInSe2 prepared by rapid thermal treatment... Alberts, V.; Schon, J. H. // Journal of Applied Physics;12/15/1998, Vol. 84 Issue 12, p6881 

    Evaluates the material properties of metallic alloys at different stages of reaction to H2Se/Ar. Information on the chalcopyrite semiconductor CuInSe2 (CIS); Experimental details; Results and discussion; Conclusion.

  • Rapid cooling leads to stronger alloys.  // Advanced Materials & Processes;Sep2013, Vol. 171 Issue 9, p8 

    The article reports that researchers from the University of Rostock in Germany have developed a way to produce high strength metallic alloys with the so-called spark plasma sintering system (SPS).

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics